Choose a light-colored wood with interesting grain for the ball. It should be one solid piece, 2 1⁄2- to 3-in. square. I like to make more than one ornament at a time, so I use a rough blank about 8-in. long in order to make two balls. Make the cap and icicle from a contrasting dark wood that takes fine details. I like to use rosewood or ebony. You’ll need a piece that’s 1-in. square and 8-in. long.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
#00 Steel Wool and White Vinegar – Put a handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least a couple days. The mixture will get darker the longer you let it sit. Once diluted, simply paint the mixture on your piece. Oxidation will occur and the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all.
Creating custom picture frames for friends and family is a great gift giving project that's sure to please even those difficult to shop for gift recipients. Everyone has a special photo or keepsake they've meant to have framed. Making a custom frame to match may be the best gift of the season. Best of all, it's a quick and simple project to complete with the right tools and set up.
This activity shows the making of square shape wooden cutting board with one of the easiest ways by using basic tools. I made it at home for my inspiration behind easy steps. This tutorial is easy enough for even beginners to understand and follow. So I am not going to explain each and every step. You can also make by painting the wood pieces, cutting, assembling, and joining in a square order to make it and put it in every corner of your kitchen to give classy look.
This cute earring box is the ideal one for giving the gifts to your loved ones. Have you ever given your gift in a wooden jewelry box? When you meet with your friends and family it is a very great idea to surprise them with such gifts. They would really admire your selection. I am sharing some of the pictures with you, which are about this earring box. Have a look at these pictures; I am sure you would like them.
To inset the aprons 3/4" from the outer surface of the legs I made a spacer from 2 pieces of plywood. This little jig made it easy to keep the distances uniform and also secure the apron to the leg while fastening. Pic 3 illustrates how the jig, apron and leg are clamped together for fastening. Each apron end is held by three 2 1/2" pocket screws. The pocket holes were made using a Kreg pocket hole jig. I assembled the short ends first and then the rest of the table base making sure the kerf (for clips) was along the top edge. Since this is a long table I also added a cross piece in the middle of the table using pocket screws.