Next, make your breadboard top out of four 2×8's and 1 2×10. Ana's plans call for all 2×10's, but I wanted to use 2×8's because they are easier to work with. I don't have a photo of the process, but if you go to the 11:18 mark on the video below you can see the process involved with attaching the top boards. You will need a Kreg Jig and 2.5″ Kreg screws for this process. Once the top is assembled, center it on the base and attach to the base from unnderneath. Use 4.5″ screws to connect the 4×4's to the top and 2 or 2.5″ screws to anchor the top to the 2×4 horizontal boards.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
But first, this build was sponsored by Timber Wolf Forest Products.  They provided the legs for the build.  Also, HomeRight provided the paint sprayer for this project.  All opinions are my own and are uninfluenced.  This post also contains affiliate links.  See disclosure policy for details.  If you purchase from these links, I may receive a small commission at no extra cost to you.  This helps keep the content on this site free.  Thank you for your support and for supporting the brands that help support this site.
Just check out this enticing and legant mirror that portray woodworking art finely blended with creativity. You can have it on the wall, especially in the lobby it looks great. It enhances the looks of your dinning room and your drawing room. I just found this over the interent and people are highly admired by this design. So, lets have a look at its image, you will get guidance on making it.
×