Creating custom picture frames for friends and family is a great gift giving project that's sure to please even those difficult to shop for gift recipients. Everyone has a special photo or keepsake they've meant to have framed. Making a custom frame to match may be the best gift of the season. Best of all, it's a quick and simple project to complete with the right tools and set up.

Just check out this enticing and legant mirror that portray woodworking art finely blended with creativity. You can have it on the wall, especially in the lobby it looks great. It enhances the looks of your dinning room and your drawing room. I just found this over the interent and people are highly admired by this design. So, lets have a look at its image, you will get guidance on making it.
Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.
This may be my longest post to date. But also the largest project, and I have to admit that the work itself was done by my husband and I was merely his helper.  We decided to build a farm table using reclaimed barn wood from scratch. Our first stop was to an awesome secret spot, secret because I’ve been forbidden from sharing its location, to pick out the wood. It’s really no secret, its located in New Jersey. Go ahead and google, it’s easy to find *wink* This place had a huge selection of slabs, doors, and everything wood.  Most of the wood comes from salvaged barns in Ohio! 
All of our tables are available in the color and finish of your choice.  Our existing color pallet includes 90 paint colors,  multiple stain color options in each workshop collection and several wax color options for our reclaimed woods.  Please feel free to explore all of our paint and stain options to help guide your design plans.  All of paint and stain finishes include a durable water based clear top coat.  This makes it easier to keep the table top clean with a damp sponge (no chemicals!) and provides protection from water rings. (How to Clean a Wooden Dining Table) 
My own personal shop is a 20x20 section of my garage. Some people might argue that I've got plenty of space, but those people obviously feel their lives are complete without owning a panel saw. I'm not judging. I'm just saying that panel saws are awesome. And even with four-hundred square feet I need to find some creative storage solutions in the shop to accommodate my power tool addiction. There are plenty of people who have done a lot more with a lot less. Here are some of my favorite space saving workshop ideas.

Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
Love the table! My husband and I are looking to build a table for our dining room. We love this table but I am having a hard time convincing him that people can still easily sit at the ends of the table even though there are support boards on the bottom. He seems to think that will get in the way (even though you clearly show your husband sitting on the end in one of the pictures 🙂 ) Can you tell me if it is a problem for those sitting on the end? Thank you!!
The free woodworking plans are sometimes very straightforward and easy, and sometimes only for someone with a high level of woodworking artistry. When you find something you'd like to build, print out the free project and instructions while they are still available. Make a point of checking the material lists before buying your building materials for accuracy.
Nothing could be easier to accomplish than these rustic, personalized wood slice tree ornaments. After slicing a log into discs, screw in an eye hook, and thread with some jute twine for a hanger. Decorate with paint or metallic markers, or try the clever ink-jet-printer transfer technique that Upcycled Treasures used for the ornaments shown here. One log will make gifts for your entire extended family.

Wow, this is really big rolling dice and the special thing of this dice is that it is made from wood. I think wooden dice are durable dice. This is one of the best decorations I have ever found. The main question is that why it is so special for me? Basically, I am a game lover and I have made this wooden dice for the decoration of home. The size of this dice is large instead of normal games dice. This is really special project for me that am the reason I make it with full charm. You can see the full image of beautiful dice in the following link.
You can create a simple and affordable eye catching frame for your artwork out of a great old wooden ladder. Simply turning the ladder on its side will allow you to display quite a lot of art in a row for so little money. This simple home decor craft project is an affordable way to introduce color, the vintage look, and even some architectural interest without costing a fortune.
During the late Victorian era, wooden items for decoration started to attain popularity. Wood is having a significant role in our life. These wooden items give a classy look to your interior furnishing as well as carry different items. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work.. It is actually very easy and interesting to make. Size, shape, design and number of compartments are according to your choice when you made it.

Beginning with this first episode, our video tutorials, related articles, and projects cover all the basics from choosing your first hand and power tools to setting up a workspace. We'll even get you started building your first projects. You can download free woodworking project plans for a handsome cutting board, a plywood workbench that you can build with just a few tools, and an elegant small box.

The article explains step by step process for making this awesome piece of wooden art. It is actually very easy to make one.This tutorial shows the making of wooden box with one of the easiest ways. However, it is a bit difficult to make them, but not so much.I make this wooden box at home easily. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps.


Build your own platform bed frame at your home by following the source linked tutorial given above. The source link also includes more pictures that can help you to build a better bed frame. You can see a step by step set of instructions and guidelines to follow with real life pictures, as well as you can download a PDF file detailing the list of materials and tools you’ll need, know about the length of every board, and most importantly color-coded illustrations of the building process.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
Basically, as you beginner you will need the following tools: a drill, an impact driver, a miter saw and a sander. With these tools you can cut, join and finish wood as a professional. If you want to save time and improve the quality of your work you can upgrade and buy yourself a pocket hole jig, a router, a thickness planer and a table saw. I have created a complete guide with tool recommendations and reviews HERE, so you make an informed decision.
These attractive gifts look like mini treasure chests. Here are the free woodworking plans, and assembly instructions to make these nice looking wooden boxes (Children's Mini Desktop Treasure Chest) from scratch. Recycle that scrap wood into a fantastic gift. A rewarding Saturday Arts and Crafts project. Free DIY (do-it-yourself, D.I.Y.) to give as a gift. Make a keepsake by using these woodworking plans.
Methods for skinning a cat have nothing on ways to build a bench. Explore different joinery methods and work with those that you are able to complete the best. Don't overcomplicate something when it doesn't need to be. There's a reason tools have improved, glue has gotten better, fasteners stronger, and new joinery methods have been introduced. A lot of the time the focus in woodworking is on finding shortcuts to get the same or better results. Don't let joinery snobs influence you.
You can also make wonderful variety of wooden boxes easily at home. It is actually very stress-free and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and stimulating work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these wooden boxes by joining equal size wooden pieces of square shapes. You can also do easily.
Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
Avoid machines that can be converted from one machine to another. The ShopSmith is a prime example of such a machine. Multi purpose machines are usually good at one or two functions, but other aspects are compromised. But the real problem is that every time you need to switch functions, you need to convert the machine. And the cost of these machines is usually high enough that you could get several single function machines for the same price.
If you want to buy this project, you can easily contact here. The person who is entry level in woodworking project can feel trouble for perfect making, but if you know the step by step procedure you will never face any kind of difficulties. In this link, you will find a different style of chair plus table and personally, I like this style of the project hope you will also like it.

Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts. 

A block plane is probably the first hand plane you'll use when getting started in woodworking. It's a relatively affordable hand tool and it's versatile. Plus, its diminutive size makes it easy to use with one hand for all types of woodworking tasks, including smoothing edges, breaking corners, trimming one surface flush to another, cleaning up end grain, and fitting joinery.
There's no better way to give thanks than to gather family and friends around an enormous table to share a feast. A farmhouse table would be the perfect spot. You could make one out of construction lumber and ordinary hardware in a couple of days. We're not talking precision woodworking here. If you can handle a circular saw and a chisel, you can do this. Farmers used to build these tables themselves, not furniture makers or carpenters, so it's okay if it turns out a bit rustic. That's half the fun. The other half is sitting down to eat at a table you built yourself.
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!

Life Storage has come with a perfect mix of rustic designs and materials with a touch of modern furniture style. The timeless elements and cleanliness give a trendy look. If you can afford $300 for a farmhouse table, this free plan is ideal for you. Even if you are a beginner, you can build this 10-seater farmhouse table which acts for storage as well.


If you are in need of a big farmhouse table, select this plan to build your own. Though not a traditional farmhouse table, it is beautiful in the outdoor living area making it ideal for guests. Also, as the table is big enough to suit any size of family, it makes it perfect for large families or when quite a few guests join you for lunch or dinner.
A luminaria (often called luminary) is a traditional Mexican lantern made from a paper bag with sand and a candle inside. We’ve add some woodworking panache to these outdoor accents and build our luminarias from wood, with box joints and a star-shaped cutout. They’re beautiful — and reusable — ways to brighten patios, steps and walkways this holiday season.
Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.
I few years ago I made a build plan for Remodelaholic for a super adorable House Frame Bed. The build plan was inspired by this darling room shared by an Australian magazine, Home Life.  Over the years a few requests have been made for a full size mattress version. Here it is --> How to Build a House Frame Bed - Full Size This bed is designed to fit a full mattress 53" x … [Read more...] 

10. Drip cyanoacrylate (CA) glue into the ball while holding the cap in place.This will firmly anchor the ball to the cap. To attach the hanging wire (see Sources, below), place a drop of glue on top of the hole and push in the wire. Apply glue to the icicle’s tenon and place it in the bottom hole. Slow setting CA glue works best for oily exotic woods such as rosewood and ebony.
Hardwood boards and softwoods may look similar in shape and dimension, but they are sold using completely different measuring systems. Softwoods are typically sold in standard lumber dimensions (such as a 2x4), whereas hardwoods are most often sold by the board foot. Calculating board feet helps you guarantee that you're getting your money's worth on every piece of hardwood you purchase.
Woodworking project plans provide extensive assistance. Project plans are available with variations of Santa and his sleigh and reindeer, candy canes, polar bears, trains, and toy soldiers. Or maybe you’d prefer a more religious display. Wouldn’t an angel or a nativity scene look heavenly on your front lawn? You’ll be able to find project help for practically anything you think of related Christmas.
Douglas fir from home improvement centers will almost always warp when you try to make a flat top. It is never dried to the same extent as hardwood and ships out for the purpose of being used as framing lumber, not furniture lumber. That said, you can do it, but buy it and let it sit in your garage for a few months or longer to let it further dry and acclimate to your environment. Even better if you plane it down after that waiting period, then allowing it to acclimate for another week or so to make it works out all of its twists prior to being turned into a top. Do you have any hardwood dealers in your area? Try visiting one and make an investment in your table...buy some good maple (soft maple is worlds harder than new douglas fir - you don't need hard maple, ie:or sugar/rock maple).
You're going to connect the two leg–apron assemblies to the stretchers using cross lap joints. These are among the easiest and most forgiving of wood joints to make, and they're also quite sturdy. Mark the joint positions on the legs and stretchers. Start the half-lap joints on the legs by notching the two outside lines with a circular saw set to a depth of 1½ inches. Guide the saw using a triangular rafter square. Between the two outside cuts make a series of relief cuts spaced ⅛ inch apart (fig. 3). Then use a sharp chisel to chop away the waste (fig. 4). When you cut the half-lap joints on the short stretcher, set the saw's depth to 1⅜ inches deep. This will make the stretcher extend ⅝ inch past the surface of the leg when the table is finally assembled. The offset will give you a table that looks like it was built by a farmer rather than by West Elm. It'll look nice.

A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.


It was murderously hot here in the Charm City suburbs last weekend. The heat index topped a full 115 degrees on Saturday. But fear not, the heat didn’t deter us from tackling our long-awaited shed storage shelves project. We’re excited about this project because we’ve been looking forward to sharing a plywood shelving article for some time now, and this article gives us the perfect avenue for that. In case you’ve forgotten (or more likely if you’ve just started reading here), here’s the new shed. It looks great on the outside, but without some shelving and storage hooks for tools inside, most of the interior space would go to waste.
If you like a large octagon table instead of a simple round table, you can consider this free DIY plan from Ana White. This table features truss supports and pedestal base which makes it extremely durable and stable. The look might unnerve you because of the angle cuts, but you can easily get this task accomplished with the right tools. The entire list of the tools and materials required are provided. Also, the instructions are very easy to follow with illustrations included. The table has the capacity for seating six people, and it can be manufactured with a budget of around $110.
This is really easy and simple project. The person who is entry level in wood working can easily do this by following some steps. You can use this as a decoration piece in your home.The main thing is that you need a full command for using wooden tools and machine.It depends on your taste that what style you are presenting in making alphabets. Visit this link if you want to make this project by yourself. In this link you can see how to make alphabet signs.
Need a farm table for a nook?  A pedestal table table works great.  Looking to seat a lot of people?  A trestle table could be the right solution for you.  All of our base options come in a variety of design styles to fit your specific interior design requirements.  If you can’t find what you need, send as picture of what you have in mind and we may be able to design a base for you.  Not sure what base would work best for you?  Our table consultants are here to help!
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Table saws, band saws, and radial-arm saws are examples of woodworking machines that are most often used exclusively in a wood shop because they are far too large and cumbersome to be portable. Even though they're confined to the shop, these workhorses are so useful that it makes sense to complete a woodworking project in the shop and carry the finished piece to the location or job site where it will be used or installed.
Don't believe the mainstream thinking that hand tools are irrelevant, too slow to be useful, or less effective than power tools. Ignore, or at least take with a grain of salt, the power tool devotees who will say "There's a reason they invented power tools, ya know!" Your "shop" is a bench attached to the inside of a coat-closet door in a one-room studio apartment right now. Power tools are going to bother that nice med student next door, and that closet shop doesn't have any ventilation for the amount of dust you'll produce. Hand tools can be more efficient (in speed, quick access, storage, and lack of set up), they're quieter, and the pleasure of silence afforded by quiet hand tools--just a few soft noises produced by your tools--is a pleasure not to be overlooked. They're portable and will move with you, you'll learn more about how different types of wood behave, and, when you run into one of those power tool zealots, just go over to Todd's house and watch a few episodes of The Woodwright's Shop to get your respect for hand tools back in check.
Isn’t it amazing to have a wooden bangle in your hand? I am sure you would like this bangle and would love to wear it. This type of bangle is very rare and it is also very durable. It cannot be broken very easily. You can see the different designs of this bangle and can enjoy wearing it. I am sharing some of the pictures of these bangles; just have a look at these pictures and start your project. These pictures are for your help. So, have a look at these pictures for getting an idea on its making.
Table saws, band saws, and radial-arm saws are examples of woodworking machines that are most often used exclusively in a wood shop because they are far too large and cumbersome to be portable. Even though they're confined to the shop, these workhorses are so useful that it makes sense to complete a woodworking project in the shop and carry the finished piece to the location or job site where it will be used or installed.
If you are looking to make a large table for dining or celebrating ceremonies with many guests, the J-pedestal dining table can be a great choice. The design was inspired by a Pottery Barn. This gorgeous table adds class to your space which your guests will also praise. Though the materials can be purchased at affordable prices (costing around $125), you need to have good carpentry skills to make it and also the process is time-consuming. Southern Yellow Pine is recommended to use for the top because not only it is inexpensive but also it is strong and durable.
If you have limited space but want to have a full-sized farmhouse table, this table plan is perfect for you and is a gorgeous one. However, this plan requires some carpentry skills, and though it is designed to be thin, it has the capacity for seating six people. A metal pipe is attached to the inside of the legs reaching across the bottom which makes the table sturdy without any chance of wobbling. If you place contrasting chairs, the table looks even more splendid.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
This snowman kit post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. The snowflakes are falling softly on the ground. You grab your hat, coat and mittens and head outside to test the snow. … [Read more...]
If you want to get into woodworking, a good project to tackle is building your own workbench. It's really not that hard. So if building your own workbench is a bit too much work, or too intimidating, then take a step back and examine whether you really want to get into woodworking. This may be different if your goal is to cut silhouettes of kittens out of plywood with a scrollsaw, but I wouldn't call that sort of activity "woodworking".
Nightstand table plans have everything you need to create a bedside table to keep every needy thing at reach at night time. This Nigh Stand plan is quite different in design from the most of the other plans. This stand has not only the three regular drawers but also having a hidden drawer that uses a secret locking mechanism to keep contents securely.
In regards to your breadboard ends: You might be able to get away with what you did depending on how dramatic the humidity difference between seasons is in your area, but in the future, you might want to elongate your dowel holes in the tongue of the joint - all but the center hole. Specifically, you want to put a pin in the center of the table end (no hole elongation) and then elongate the holes on either side - maybe 1/16" to each side of center (it's OK to glue the center like you did). This allows the center pin to keep the board centered (duh) and then allows the table top to grow and shrink across it's width without putting undue stress on the breadboard ends. This is important because wood expands/contracts across it's grain significantly more than it does along it's length, so when you have a joint where end grain meets side grain (as in your breadboard ends) NOT taking this into account can mean that your project disassembles itself - or at least becomes "rickety" as the expansion/contraction cycle loosens the joint. The amount of growth you can expect is determined by wood species, initial moisture content of the wood, and humidity change across seasons. There are online references you can check to see how much you would want to elongate those holes.
I am working on a range of traditional handmade oak furniture in kit form. At the moment I am limiting it to a ‘Joined’ or ‘Coffin’ stool together with a table version. I have created a website http://www.oakits.co.uk with a link to an instruction video on YouTube. There has been a lot of interest here in the U.K. but I’m wondering if there may be a market for them in the U.S. Your comments would be greatly appreciated
Basically, as you beginner you will need the following tools: a drill, an impact driver, a miter saw and a sander. With these tools you can cut, join and finish wood as a professional. If you want to save time and improve the quality of your work you can upgrade and buy yourself a pocket hole jig, a router, a thickness planer and a table saw. I have created a complete guide with tool recommendations and reviews HERE, so you make an informed decision.
A luminaria (often called luminary) is a traditional Mexican lantern made from a paper bag with sand and a candle inside. We’ve add some woodworking panache to these outdoor accents and build our luminarias from wood, with box joints and a star-shaped cutout. They’re beautiful — and reusable — ways to brighten patios, steps and walkways this holiday season.
Now you have the knowledge of creating your dream farmhouse table of your choice. With 53 DIY Farmhouse Table Plans, consider choosing anyone which you like. Even if you are not an expert at carpentry, you can select from the simple designs that are equally stylish. If you are great at woodworking, you can consider the projects which require some expertise.
Another way to customize the look of your table is with the top shape.  In addition to traditional rectangular and round table tops, we also offer oval and racetrack tops.  What’s that?  A racetrack table top has curved ends and straight sides whereas an oval top is curved on all sides.  As with table bases, it is important to consider form with functionality!  In addition to shape and size, all of our table tops come in standard (about 1″), thick (about 1.5- 1.75″) and extra thick (+2″) thicknesses.  Do you need an extra large table, a very narrow table or an odd shape?  All of table lengths, widths and shapes are customizable.  Just ask us if you don’t see the exact size you are looking for!
Have you heard about the wooden swords for decoration? If no, then I am sharing the picture of the wooden swords with you. This is an ideal gift for giving your loved ones. You can hang these swords on the wall and in the lobby. It looks great and gorgeous. Have a look at the pictures which I am sharing with you, I am sure you would like these pictures. These are the pictures which are best for wall decoration. So, you should choose these swords for giving the gifts to your loved ones.

I few years ago I made a build plan for Remodelaholic for a super adorable House Frame Bed. The build plan was inspired by this darling room shared by an Australian magazine, Home Life.  Over the years a few requests have been made for a full size mattress version. Here it is --> How to Build a House Frame Bed - Full Size This bed is designed to fit a full mattress 53" x … [Read more...]
The most useful stationary tools are a drill press and a table saw. For the longest time, I only had a cheap old contractor saw, and only a very small drill press, but I made do with those. The difference between a good drill press and a cheap drill press is much smaller than the difference between a cheap drill press and no drill press, so don't wait until you can afford the perfect one.

No doubt many of us would love to have a huge, 2000 square foot building devoted to woodcraft, on a wooded acreage somewhere. But there is a reality that goes with a hobby shared by numerous ordinary people: very few really have the means to set up such palatial workshops. We have our lives to lead, and engaging in such a venture is out of the reach for most, myself included. This article is dedicated to workshops for "the rest of us."
Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8’s. Everything else was kept the same as Ana’s plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.

Have you ever seen wooden slippers? These are the slippers which you can gift someone and they are very comfortable. You can make them very easily. While giving the gift you always want something unique. These are the unique slippers and you can wear these slippers in your home too. You can use them as a decoration piece and while going into the lawn you can have them. Have a look at the pictures which I am sharing with you, I hope you would like these pictures.


The free woodworking plans are sometimes very straightforward and easy, and sometimes only for someone with a high level of woodworking artistry. When you find something you'd like to build, print out the free project and instructions while they are still available. Make a point of checking the material lists before buying your building materials for accuracy.
If you want to get into woodworking, a good project to tackle is building your own workbench. It's really not that hard. So if building your own workbench is a bit too much work, or too intimidating, then take a step back and examine whether you really want to get into woodworking. This may be different if your goal is to cut silhouettes of kittens out of plywood with a scrollsaw, but I wouldn't call that sort of activity "woodworking".
Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8’s. Everything else was kept the same as Ana’s plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
×