Each issue of Wood News , our online woodworking magazine, features a different home workshop, and we've compiled 10 of these features here. Browsing them is a great way to find new ideas on how to set up your own shop, or if you just want to see innovative ways other woodworkers have approached the various shop setup issues we all face. From space considerations and smart storage ideas to the various tool combinations and approaches to woodworking, you'll find something here that's really interesting. Click each image to take a look!
While driving the car, you always need a keychain and in your home it is also a basic necessity. Often you keep your important keys in the keychain and you can carry this key chain everywhere. I am sharing such a key chain with you which is really an astonishing one as it is in the shape of a USB. You can have keys in it and hang it on the wall hanging. You can also give this key chain as a gift to your friends.This key chain is very easy and simple to make. So, do not hesitate while making it. I am sharing some pictures of this key chain with you, let’s have a look at these pictures.
The most useful stationary tools are a drill press and a table saw. For the longest time, I only had a cheap old contractor saw, and only a very small drill press, but I made do with those. The difference between a good drill press and a cheap drill press is much smaller than the difference between a cheap drill press and no drill press, so don't wait until you can afford the perfect one.
Table aprons are the boards that make up the sides of the table base and connect the legs. They are also called table skirts. Dimensions are 3 1/2" wide and 22 1/4" long across the ends and 62" long down the sides. For a 34x72 inch table and 4x4 legs, these apron lengths inset the legs roughly 2" on all sides. The wood is 3/4" to 1" thick rough-cut wood from our old barn. The red color was a little stark so I sparsely brushed a coat of chalk paint on and waxed again with Briwax.
There are also project books that provide fun new ideas to play with on the scrollsaw, and the fun is made even better when you’re being productive by making gifts at the same time. If you’re a carver, there are many project ideas available to you, as well. There are also Christmas projects for the woodturner. One popular idea is to make ornaments for your tree—or someone else’s. There are several books that will provide help specifically for making ornaments. You’ll find that woodturning allows an opportunity for endless creativity! You can find a variety of kits available, and then you can use whatever material you prefer to turn and then shape and finish any ornament you can imagine!
If you are looking for a simple design for making your farmhouse table where you can have additional space to make more people sit, this plan could be ideal for you. The benches give you this option to allow a few more people to squeeze in. This table fits excellently in your contemporary space. This plan can be executed by any beginner, and you are also provided with square sized table and benches.
As Chief Creative Officer and Founding Partner at Brit + Co, Anjelika Temple brings her voracious consumption of all things creative and colorful to DIY projects, geeky gadgetry finds and more. When she's not DIY-ing her heart out, you'll find her throwing dinner parties with friends or adventuring with her husband David, their daughter Anokhi, and their silly dog Turkey.
Having swing in your own home, yard or garden can be so de-stressing and be relaxing a thing to enjoy, that doesn’t matter you have a big yard or patio, or vacant porch. Kids will surely fall in love with this swing porch and love playing on a breezy day. Even, adults also do relax and enjoy a quite morning coffee, or just being embraced by the sun in the swing.
This farmhouse table is one of the sturdiest tables that you can make. It can fit in smaller spaces but has ample space for seating four people. You can also fit in six people if you want. The benches provide that extra space and also they look great. The plans are very easy to execute. Solid oak wood is recommended for the top and turned wood legs provide a great look which you can build in about $250.
This wooden sofa side table can also be made in different sizes and shapes as you can find on the internet. Some of the items you will need for this project are wooden pieces, cutter, screws, etc. We have included a video tutorial here that illustrates the process of building a wooden sofa side table. This is not the exact one that you see in the image above, but it can be modified to build any shape or design you want. The video tutorial also has English subtitles to make it easy for anyone to understand and follow the steps.
In this month’s woodworking project demonstration, George Vondriska teaches you the step-by-step process for building a coat tree that will look great in your home or workshop. He demonstrates the simple techniques for installing wrought-iron hooks, crafting the coat tree’s feet, and quarter sawing to achieve that beautiful face grain on all four sides.
Because these legs were salvaged they had old screw holes in them which were filled prior to painting. In retrospect, it probably would have looked cool to just leave them. I lightly sanded the legs with 100 & 150 grit sandpaper which smoothed them without removing all the saw marks. One coat of chalk paint and 2 coats of clear Briwax was used to finish the legs. Briwax yellows the finish a bit which aged the paint nicely. Between coats of Briwax I sanded through the paint on some of the edges with 100 grit paper to show wear.
Once the backings are connected, you can append the 4×4 leg runners. In the event that you have a Kreg HD, then you can simply penetrate 3 1/2″ stash gaps into the 4×4's. If not, you can simply connect them with 3 1/2″ Spax screws from the front countenances of the legs into the runners. You can conceal the screw openings, with the equipment, toward the end.
At Cottage Home, we know purchasing custom furniture and décor on the Internet can raise some concerns and questions. Our business is dedicated to pioneering a new process for providing high-quality made-to-order furniture on the Internet. We strive to make it as easy as possible for our customers to have access to custom bench-built products for their homes.
After we got all our aggression out on the table, I applied a coat of Minwax pre-stain wood conditioner followed by a custom stain I came up with. I’ve purchased several “gray” stains that are supposed to give the wood a weathered, rustic look, but no matter how many coats I add, the gray barely colors the wood at all. I wanted the table to still be light enough to show all the wood grain, but have that old, weathered look to it, and this is the perfect mix I came up with:
A block plane is probably the first hand plane you'll use when getting started in woodworking. It's a relatively affordable hand tool and it's versatile. Plus, its diminutive size makes it easy to use with one hand for all types of woodworking tasks, including smoothing edges, breaking corners, trimming one surface flush to another, cleaning up end grain, and fitting joinery.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.The final piece looks like the one in the image. It is absolutely loveable. The design, color and looks can also be modified to suit the surrounding area.
There was one crack which required stabilization to prevent further splitting. On an old piece of wood there is nothing more beautiful than a contrasting butterfly inlay to lock the pieces together. Alternatively you could glue and clamp the split, however it is hard to get enough glue into the crack and an inlay looks much better. I used a piece of bloodwood and an inlay jig on my router for the butterfly. This was the first time I've tried inlay and it was very easy. While the butterfly is beautiful & interesting, it acts functionally as 2 opposing wedges to prevent the crack from widening. The last pic shows the finished product.
Table saws, band saws, and radial-arm saws are examples of woodworking machines that are most often used exclusively in a wood shop because they are far too large and cumbersome to be portable. Even though they're confined to the shop, these workhorses are so useful that it makes sense to complete a woodworking project in the shop and carry the finished piece to the location or job site where it will be used or installed.
In my project section I wrote an article about small boxes made with a router. The article was written years ago and the boxes were made several years before that. Thus, I had to use one of those old boxes to write this article as I couldn't exactly remember how I made them. The initial construction process came from that great Canadian TV show, The Router Workshop, but the jig I use was born of necessity. One year I decided to build a pile of these boxes and enter a craft fair. After two or three, I decided there had to be a faster way to set up for the cuts, so I used a discarded table saw sled to fashion the jig in this article.
In my design, I considered 3 different types of legs made from 30" long cedar 4x4s. (You could use other types of wood including gluing three 2x4s together to make solid legs.) The simplest design was to cut the legs to length and use the 4x4s square. Second was to taper the two inside surfaces and third was to taper all four surfaces. I ended up tapering all 4 sides on my bandsaw. The cut line begins 4" from the top and removes 1/2" at the bottom. Pic 2 shows how little I removed. I wanted the legs to have "shape" while remaining stout in appearance and this slight taper seemed about right. Pic 2 also shows the levelers in the bottom of these legs which were salvaged from a previous project. I decided to leave the levelers and shortened the legs a bit.
Hey I love this article,Thanks. 4 months ago, I started looking for woodworking. The industry is extremely interesting but I have problems with how I can do it.My uncle who has been doing more than me in this industry, has suggested to me to follow Teds plans, Do you think it’s a good move to follow these plans? ? I keep reading good reviews about Teds Plans but I am unsure if it will still work on me.At this time I can purchase these plans at a very low price,so if possible can you leave me feedback on wether I should do it or not. It would mean a lot coming from an expert in this field.
This Welcome Farmhouse Sign post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. Farmhouse style wood signs are a fun way to personalize your space. They are fairly easy to make yourself … [Read more...]
Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.