A good tool to get next is some sort of circular saw. A circular saw cuts a lot faster than a jigsaw, and it's easier to make a straighter cleaner cut with it. It's also a very useful tool for cutting up big sheets of plywood, even if you already have a table saw. At this point, you have enough tools for some simple projects such as this table or some storage shelving


It was murderously hot here in the Charm City suburbs last weekend. The heat index topped a full 115 degrees on Saturday. But fear not, the heat didn’t deter us from tackling our long-awaited shed storage shelves project. We’re excited about this project because we’ve been looking forward to sharing a plywood shelving article for some time now, and this article gives us the perfect avenue for that. In case you’ve forgotten (or more likely if you’ve just started reading here), here’s the new shed. It looks great on the outside, but without some shelving and storage hooks for tools inside, most of the interior space would go to waste.
This table is a little narrower than I would have liked for it's length (34x72), but it's perfectly sized for the space we are using it in.  At 72" long, I would have preferred something closer to 40" wide but this works for us.  The top is made from 16" wide soffet boards from a house I helped tear down when I was 10 yrs old (no, it wasn't the house we were living in).  The old boards have been in the barn for 40 years and needed to be used.  The center painted board is also from the same house.  
This table is a little narrower than I would have liked for it's length (34x72), but it's perfectly sized for the space we are using it in.  At 72" long, I would have preferred something closer to 40" wide but this works for us.  The top is made from 16" wide soffet boards from a house I helped tear down when I was 10 yrs old (no, it wasn't the house we were living in).  The old boards have been in the barn for 40 years and needed to be used.  The center painted board is also from the same house.  

Woodworking is based on a small number of core skills that when combined in various groupings make it possible for us to build a huge range of projects. Unfortunately, too many new woodworkers do not take the time to learn the core skills, opting to jump ahead of themselves to projects that seem more appealing at the moment. Very often, acquired bad habits and frustration are just around the corner.


Pegboard is the master of all workshop organizational tools. You can buy full sheets (4x8) at any big box store, but most also sell smaller, more manageable sheets. And while you can just slap these up on any wall, something like this fold-out wall cabinet will double your storage and keep your tools tucked safely away. You could also try this fancy sliding-door version.

From the source tutorial, you can get illustrates to the instruction about the plan. Everything is fairly described as diagrams, images, the list of supplies and tools need etc. The process to this plan is very easy to understand and follow for if you are having some basic woodworking knowledge. Make sure to collect all the supplies you need before you start with the project. You may even ask any question directly in the comment section of the tutorial post and also comment the images of your final product if you have completed it. Either way, I hope that you will manage to build this one nicely.​

Because these legs were salvaged they had old screw holes in them which were filled prior to painting.  In retrospect, it probably would have looked cool to just leave them.  I lightly sanded the legs with 100 & 150 grit sandpaper which smoothed them without removing all the saw marks.  One coat of chalk paint and 2 coats of clear Briwax was used to finish the legs.  Briwax yellows the finish a bit which aged the paint nicely.  Between coats of Briwax I sanded through the paint on some of the edges with 100 grit paper to show wear.  
There are also project books that provide fun new ideas to play with on the scrollsaw, and the fun is made even better when you’re being productive by making gifts at the same time. If you’re a carver, there are many project ideas available to you, as well. There are also Christmas projects for the woodturner. One popular idea is to make ornaments for your tree—or someone else’s. There are several books that will provide help specifically for making ornaments. You’ll find that woodturning allows an opportunity for endless creativity! You can find a variety of kits available, and then you can use whatever material you prefer to turn and then shape and finish any ornament you can imagine!
×