#00 Steel Wool and White Vinegar – Put a handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least a couple days. The mixture will get darker the longer you let it sit. Once diluted, simply paint the mixture on your piece. Oxidation will occur and the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all.
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
Drilling holes sounds pretty simple, and it is! There’s a few tricks though that will help you drill better holes and get more use from your drill. The video below includes tips like catching dust, making guides for drill holes, making sure you drill to the right depth every time, and creating pilot holes. Armed with these tips, your holes should be more consistent in depth, make less mess, and always be in the right place.
Hi Nancy! I only looked specifically for rectangular tables – sorry!! I do know the blog Little Red Brick House made a round farmhouse table but I couldn’t find instructions for it. Maybe reach out to her and she could give you more details? Here’s the link to her post: http://littleredbrickhouse.com/industrial-farmhouse-dining-room-makeover-one-room-challenge-reveal/ Thanks for stopping by!
The article explains step by step process for making this awesome piece of wooden art. It is actually very easy to make one.This tutorial shows the making of wooden box with one of the easiest ways. However, it is a bit difficult to make them, but not so much.I make this wooden box at home easily. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
Hey, I want to build all of these (and I did read to the end), but my list of projects is so long that any one of these will have to wait ’til next year (and i don’t mean January). thanks for all these ideas. there is one more i read about in the Handy Family Man. It is an adaptation to your shop vac that puts the hose at your project so it sucks up the dust as it is produced. Wonderful, right? Maybe next year!
I think you can see from all of these choices, the best solution is the one that works for YOU and your home. Just make sure you create an environment that makes you feel creative and excited to work. And while there are amazing workshops online for inspiration, don’t go crazy thinking your work area needs to be a renovation in and of itself! Use bits and pieces of inspiration, then get going on your projects!
To make the top, align the three pieces of 2 x 12. Fit them as tightly together as you can. Bore four pocket-screw holes through the bottom faces of the top pieces, then spread glue on each adjoining edge. With the pieces clamped together so that the ends are flush, fasten with 2½-inch pocket screws. Glue will squeeze out of the joint. Wait a few minutes for the glue to get rubbery, then shave it off with a sharp chisel. Keep the top flat as it dries—I like to clamp cauls across both ends to add stability. Cauls are 2 x 4s or other pieces of stout wood turned on their edges.
If you like a large octagon table instead of a simple round table, you can consider this free DIY plan from Ana White. This table features truss supports and pedestal base which makes it extremely durable and stable. The look might unnerve you because of the angle cuts, but you can easily get this task accomplished with the right tools. The entire list of the tools and materials required are provided. Also, the instructions are very easy to follow with illustrations included. The table has the capacity for seating six people, and it can be manufactured with a budget of around $110.
To inset the aprons 3/4" from the outer surface of the legs I made a spacer from 2 pieces of plywood.  This little jig made it easy to keep the distances uniform and also secure the apron to the leg while fastening.  Pic 3 illustrates how the jig, apron and leg are clamped together for fastening.  Each apron end is held by three 2 1/2" pocket screws.  The pocket holes were made using a Kreg pocket hole jig.  I assembled the short ends first and then the rest of the table base making sure the kerf (for clips) was along the top edge.  Since this is a long table I also added a cross piece in the middle of the table using pocket screws.
The blade on a block plane, (click to enlarge drawing) commonly referred to as a plane iron, is mounted with the bevel side up to produce a cutting angle of about 37 degrees in a standard plane and 25 degrees in a low-angle plane. Some block planes feature an adjustable mouth, which allows the plane to be tuned for different cuts; Close the mouth and lower the blade for finish cuts or open the mouth and extend the blade for thicker rough cuts.
Love the table! My husband and I are looking to build a table for our dining room. We love this table but I am having a hard time convincing him that people can still easily sit at the ends of the table even though there are support boards on the bottom. He seems to think that will get in the way (even though you clearly show your husband sitting on the end in one of the pictures 🙂 ) Can you tell me if it is a problem for those sitting on the end? Thank you!!

As Chief Creative Officer and Founding Partner at Brit + Co, Anjelika Temple brings her voracious consumption of all things creative and colorful to DIY projects, geeky gadgetry finds and more. When she's not DIY-ing her heart out, you'll find her throwing dinner parties with friends or adventuring with her husband David, their daughter Anokhi, and their silly dog Turkey.
Liz, Great job on your new table and benches. They really look great. Love the chandelier also. Wanted to let you know that after I saw your tutorial on the board and batten in your living room and dining room, it really inspired me. I said to myself, “I can do that.” So, with that in mind, I am just finishing up board and batten in my laundry room. It was really an easy project and I love the results. It really perks up a drab old laundry room. I ended up doing all the work myself. The only help I asked my husband for, was with the nail gun, as we had to really get into some tight places. All in all, though, I am very pleased with it. Thanks for the idea.
To start, make a base assembly out of the aprons, legs, and stretchers. Attach one leg on either side of one of the short aprons. Bore two holes for pocket screws into each side of the apron's back, four in total (fig. 1). Clamp the legs to the apron, but add a ⅛-inch piece of wood to the front as a spacer (fig. 2). This will offset the face of the apron from the face of the leg, pushing it back a bit and creating a nice dimensionality. Drive the pocket screws through the apron into the leg. Repeat the same procedure for the second leg–apron assembly.
​Every project needs some tools and material to build on. The tools and material you will need in this plan include Miter saw, jigsaw, measuring tape screws and screwdriver etc. We will suggest you take high-quality material for the plan. Read the source tutorial and watch the video tutorial below for more details. Follow all the steps properly to make a nice and strong Rustic cooler. The tutorial explains the procedure for building this awesome gift. Make sure to use the only high-quality material for any woodworking project. 

Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.

You're going to connect the two leg–apron assemblies to the stretchers using cross lap joints. These are among the easiest and most forgiving of wood joints to make, and they're also quite sturdy. Mark the joint positions on the legs and stretchers. Start the half-lap joints on the legs by notching the two outside lines with a circular saw set to a depth of 1½ inches. Guide the saw using a triangular rafter square. Between the two outside cuts make a series of relief cuts spaced ⅛ inch apart (fig. 3). Then use a sharp chisel to chop away the waste (fig. 4). When you cut the half-lap joints on the short stretcher, set the saw's depth to 1⅜ inches deep. This will make the stretcher extend ⅝ inch past the surface of the leg when the table is finally assembled. The offset will give you a table that looks like it was built by a farmer rather than by West Elm. It'll look nice.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.

Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8's. Everything else was kept the same as Ana's plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.

*Please NOTE: While my table has held up well and had only a small amount of movement after 2 1/2 years, there are certainly things I would do differently with more experience under my belt. For beginners, I'd recommend using biscuits and glue for the top planks. Dowels or floating tenons/dominos are another option. Do make sure to let the wood properly dry.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
How amazing to have the earrings which are very elegant looking. I just came across these earrings online with wood and you can see the designs inside it. If you wear these earrings on the parties, your personality would become attractive. Now, don’t buy expensive earrings for parties.Have a look at the image and you would find it great to make them.
The router might just be the most versatile woodworking power tool there is and it's a great first tool for beginner woodworkers. When set up properly and safely handled, a router can do everything from cutting joinery to shaping parts. Just be sure you understand the basic safety procedures and read the tool's manual if you're new to using a router.
No doubt many of us would love to have a huge, 2000 square foot building devoted to woodcraft, on a wooded acreage somewhere. But there is a reality that goes with a hobby shared by numerous ordinary people: very few really have the means to set up such palatial workshops. We have our lives to lead, and engaging in such a venture is out of the reach for most, myself included. This article is dedicated to workshops for "the rest of us."
Angel Crafts | Baby Crafts | Basketry | Beading | Candle & Soap Making | Computer Crafts | Crochet | Knitting | Doll-Making | Drawing & Painting | Family Tree | Felt Food | Felt Flower | Floral | Gardening Crafts | Greeting Cards | Jewelry & Beading | Kids Crafts | Preschool Printables | Locker Hooking | Nail Art | Nature Crafts | Needlework | Owl Crafts | Painting | Paint Chips | Patriotic Crafts | Pennants & Buntings | Plastic Canvas | Quilting | Rubber Stamps | Scrapbooking | Sewing | Shoe Crafts | Silhouette | Soap Making | Tatting | Wedding Crafts | Woodworking

For the legs, we purchased black steel gas pipes which had to be measured and cut to size.  After the steel pipes were cut they had to be manually threaded with a pipe threader.  Gas fittings were used to connect the piping. This step resulted in a few choice bad words, it seems you can actually get them already threaded. But why should we take the easy route, when we can make ourselves crazy instead.


After we got all our aggression out on the table, I applied a coat of Minwax pre-stain wood conditioner followed by a custom stain I came up with. I’ve purchased several “gray” stains that are supposed to give the wood a weathered, rustic look, but no matter how many coats I add, the gray barely colors the wood at all. I wanted the table to still be light enough to show all the wood grain, but have that old, weathered look to it, and this is the perfect mix I came up with:


Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts.
This is another basic farmhouse table design which you can easily build. However, the table is large with a seating capacity of at least ten people. This table is also a great addition to be in your home as it serves many purposes including storage apart from dining. The instructions are provided in two separate parts; first part includes the construction process and the second part includes the finishing touches.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
Sand the table smooth. Start with 80-grit sandpaper, and move to a finer grit for each pass. You should end with 220-grit. I finished the table with two coats of Jacobean-tinted polyurethane, then buffed on a couple of coats of wax after it was dry. The dark tint hides any scratches or nicks and also makes it look like it was built a century ago. On that note, you can give up your coasters—a little wear will only make your table look better.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts.
Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools. Next to the radial arm saw and in the corner is the floor drill press with accessory storage next to it for all drilling operations.  Across from the radial arm saw is a separate workstation set up with a small portable table saw and router set-up with storage underneath for routers, bits and accessories.

This farmhouse table is one of the sturdiest tables that you can make. It can fit in smaller spaces but has ample space for seating four people. You can also fit in six people if you want. The benches provide that extra space and also they look great. The plans are very easy to execute. Solid oak wood is recommended for the top and turned wood legs provide a great look which you can build in about $250.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
This tutorial shows the making of stylish wooden wall hangings which is one of the easiest ways by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps. You can also make by cutting, assembling, add mesh and plastic, then attach to boundary and fill with your favorite light to flowers.
Have you ever seen a knife made of wood? It is only for decoration purpose, but it can be a great gift. I hope you would like this. You can give this knife as a gift to your fellows and it is very amazing that this knife is also sharp. Give this knife as a gift and they would surely like it. I am sharing some pictures of this knife and I hope that you would like them. Just have a look at the pictures.

This video shows the making of wooden hanging with one of the easiest ways. I make this wooden stylish wooden hanging at home easily and decorate with the variety things that give fabulous look to my room. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps. It is actually very easy and interesting to make. Size, shape and design is according to your choice when you made it.
×