A wooden cutting board can be used in the kitchen for cutting purposes. You can see one in the image above. This wooden cutting board can be built by using wooden pallets from your house. You need only a few items to build this beautiful wooden cutting board. I suggest you to make more than one as they can be used anywhere in the house for many purposes. You can easily make it at home and use it for cutting different things in the kitchen. In addition, it adds a nice visual appeal to your kitchen. Make sure to use only high quality items for any woodworking project.
Drawing inspiration from a round trestle table that was worth $3350, Rogue Engineer came up with their free DIY plan to make the table cheaper. Unexpectedly, you can make this excellent table for around $40. You may think that round tables are difficult to build, but if you have the proper tools and follow the instructions carefully as provided, you can actually make this table with ease.
This design looks extremely stylish which you will want to sport in your kitchen or living space. However, you might think it will be difficult to make this stylish three pedestal table but stay rest assured, even if you are a novice at woodworking, you can create this project with ease. The design is extremely simple to make and brings a charming feel to your room.
I just discovered your site and I’m enamored! You are truly gifted and I love your style. This post really spoke to me because 1. I have sons too 2. We are just about to re-do our kitchen table 3. I just wrote a whole post about our kitchen table on my website. I feel like the kitchen table really is a sacred place for family and it’s beautiful that you built yours together. If you want to read my kitchen table post, check it out at http://kirstenjoyhobbs.weebly.com/homemaker/the-kitchen-table-a-horror-story. Cheers 🙂
You’ll need to buy 4×4, 2×10, and 2×4 boards for this project. These boards can be found at your local lumber yard. Take your time to find quality boards that are straight and have little warp. First, I built the table top out of 2x10s. I used 5 2×10’s for the main part of the table and a 2×10 for each breadboard end. Ana’s plans call for four main boards, but I wanted a little larger area to spread out. I used a 12″ miter saw to make all of the cuts. I cut the 5 boards to 69 inches long.
In regards to flattening the top, another technique would be take a pencil (soft lead) and lightly draw some big lazy squiggles across the top - enough so that there is a line every few inches. Then, use either a jointer plane or a belt sander to flatten the top until the squiggles are gone. The lines give you a reference to what is high and what is low - and when you are finished in a particular area. With the jointer plane, you want to stroke at about 45 degrees to the grain of the wood, and with a belt sander, you want to keep the sander flat on it's platen (don't let it tilt and dig in) and use wide, arcing, sideways sweeps with very light pressure - again at about 45 degrees to the grain of the wood - never let the sander start or stop when in contact with the surface. In both cases, finish with light sanding with either a belt sander, linear sander, or by hand, stroking in the direction of the grain. Palm sanders can leave swirls.
You can make this table with a budget of around $100 from solid wood which makes the table extremely sturdy and durable. The inspiration was drawn from Restoration Hardware Provence table, and Anna White provides this plan with a little twist. The project is very easy to complete from 2x4s. 4x4s are difficult to find and also expensive. Moreover, you will find it difficult to cut and join 4x4s tending to warp.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
For the legs, we purchased black steel gas pipes which had to be measured and cut to size.  After the steel pipes were cut they had to be manually threaded with a pipe threader.  Gas fittings were used to connect the piping. This step resulted in a few choice bad words, it seems you can actually get them already threaded. But why should we take the easy route, when we can make ourselves crazy instead.
Never consider using wood from a high volume store such as Lowes or Home Depot for furniture. You will almost assuredly have serious warpage as this wood is never dried to the proper level prior to being placed in the stores for sale. I normally shoot for 7%-8% moisture content. Anything greater than that will have a tendency to warp as it continues to dry out. You need to go to a lumber yard where the boards are actually dried prior to sale. You can acquire an inexpensive meter and check the boards yourself prior to purchase. Actually, I prefer air dried lumber as opposed to kiln dried. I have let it dry for 1-2 years or more prior to using it. I don't run it through the planer until I am ready to use it. Hope this is helpful. By the way, Red Oak or Cherry makes beautiful furniture. I seldom use white oak because the stuff is really tough to work with due to its hardness. Make beautiful furniture, though!
Drawing inspiration from a round trestle table that was worth $3350, Rogue Engineer came up with their free DIY plan to make the table cheaper. Unexpectedly, you can make this excellent table for around $40. You may think that round tables are difficult to build, but if you have the proper tools and follow the instructions carefully as provided, you can actually make this table with ease.

I know you hate to ask for anything, but when it comes to woodworking it will bear you in good stead. You know that, when it comes to computers and carpentry, your grandfather has probably already done it. Call him and ask. Fortunately, there are also a lot of (and will be more) people online who are older than 30, many of whom are retired and lucky enough to be able to spend a lot of time online in woodworking forums answering questions instead of boring day-job office applications. They are helpful, generous and kind. You should approach them earlier and often. One of them will also point you to a veritable treasure trove of saws, and a master saw restorer and seller.

One of the most elegant farmhouse tables that can add to your space is this simple design. If you have a large dining space, you can make this rustic design. At least ten people can sit together at this dining table. The dimensions of this table are 96″X41″. The bench and the chairs add character to this farmhouse table. Simply, follow the instructions step by step and shop for the materials required to make this beautiful piece. Kiln-dried pine wood is recommended for this table.
After we got all our aggression out on the table, I applied a coat of Minwax pre-stain wood conditioner followed by a custom stain I came up with. I’ve purchased several “gray” stains that are supposed to give the wood a weathered, rustic look, but no matter how many coats I add, the gray barely colors the wood at all. I wanted the table to still be light enough to show all the wood grain, but have that old, weathered look to it, and this is the perfect mix I came up with:
10. Drip cyanoacrylate (CA) glue into the ball while holding the cap in place.This will firmly anchor the ball to the cap. To attach the hanging wire (see Sources, below), place a drop of glue on top of the hole and push in the wire. Apply glue to the icicle’s tenon and place it in the bottom hole. Slow setting CA glue works best for oily exotic woods such as rosewood and ebony.

Hardware stores are full of big compound sliding miter saws. But before you buy one, ask yourself, how often do you need to cut miters on stock wider than a non sliding miter saw can handle? For the few times you have to do that, it's probably better to use a circular saw. The complicated mechanism of a compound sliding miter saw makes them bulky and less rigid. Which means an expensive compound miter saw may not make as clean a cut as you can with a table saw sled. 

Great story and not at all boring. I found a belt sander can be used cross grain to flatten things out. A straight edge and pencil to mark high spots, and more sanding - keep the sander moving always and repeat as necessary. It is possible to get things amazingly flat this way. I'll do that and follow up with a light dusting of blue chalk line chalk in an old sock to highlight the scratches. Progressively smaller grits and sanding with the grain and chalk in between. When no more scratches show with the blue chalk it should be getting pretty smooth. In automotive work this would be called a "dry guide coat". Same idea, similar (but different) product.
If you are searching a very stylish gift for your friends who are females, then your search ends here, as I am sharing a leaf shape jewelry box that is the most stylish one. I am sure your friends would love to have it. They can keep their jewelry in this box. You would not need any other box for keeping your essential items. If you would give it as a gift, your friends would surely love to have it. I am sharing some of the pictures of this jewelry box, just have a look at these pictures.

As with most websites, we do log web visits. This information, however, does not have a link to you personally. These logs help us understand the needs of our audience and the areas of our site that you do or do not find useful. When you simply browse our site, no personal information is being collected.  We may disclose this non-personal information to third parties such as sponsors, clients or advertisers.


There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are fifteen woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.
I know you hate to ask for anything, but when it comes to woodworking it will bear you in good stead. You know that, when it comes to computers and carpentry, your grandfather has probably already done it. Call him and ask. Fortunately, there are also a lot of (and will be more) people online who are older than 30, many of whom are retired and lucky enough to be able to spend a lot of time online in woodworking forums answering questions instead of boring day-job office applications. They are helpful, generous and kind. You should approach them earlier and often. One of them will also point you to a veritable treasure trove of saws, and a master saw restorer and seller.
Nearly every woodworking project in one form or another will require you to check some intersection, joint, or board end for squareness, or "square." In some cases, you'll need to confirm that an entire assembly is square. For small projects, you can use a squaring tool, such as a try square, speed square, or framing square. For larger projects, you can check for square by measuring diagonally between opposing corners: The assembly is square when the measurements are equal. You can also use the 3-4-5 method, based on the Pythagorean Theorem: a2 + b2 = c2.
With a little wood glue and imagination, painted 2”x2” wood pieces are topped with wooden balls and then dressed with fabric and a twig shepherd’s hook. A smaller wood block, peg, and fabric make the manger in this craft from The 36th Avenue. Place inside a paper-lined crate graced with a craft paper star, and the true meaning of Christmas will quickly come to life.
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
Greet your guests with a happy group of snowmen made from a 4”x4” fence post. Just paint them, and then accessorize with socks for hats and flannel for scarves, like this snowman family by A Mommy's Life With a Touch of Yellow. They’ll look great for the entire winter season on an entryway table, a mantel, or a front stoop, even after the snow melts.
I few years ago I made a build plan for Remodelaholic for a super adorable House Frame Bed. The build plan was inspired by this darling room shared by an Australian magazine, Home Life.  Over the years a few requests have been made for a full size mattress version. Here it is --> How to Build a House Frame Bed - Full Size This bed is designed to fit a full mattress 53" x … [Read more...]

We were so pleased that we bought a quart size to use on the kitchen cabinets. This is the ONLY stain that you can buy which will give you that lovely espresso color. I've tried an "espresso" liquid stain and a "java" liquid stain. I have no idea why they don't work but there is something magic about this gel stain that makes a difference. ... full review


The first – and some say the most important choice in designing a dining table is size.  Since our tables are made-to-order we can offer a farmhouse table in any size, shape, style or color.  Do you need a 12 foot table, 72″ round pedestal table, a narrow 32″ wide trestle table, a 36″ high counter height table?  Large, long, narrow, small, square, round, oval tables.  All no problem.  We can make any of these and more.   Farmhouse tables are available as either new wood tables or old reclaimed wood.    

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Because these legs were salvaged they had old screw holes in them which were filled prior to painting.  In retrospect, it probably would have looked cool to just leave them.  I lightly sanded the legs with 100 & 150 grit sandpaper which smoothed them without removing all the saw marks.  One coat of chalk paint and 2 coats of clear Briwax was used to finish the legs.  Briwax yellows the finish a bit which aged the paint nicely.  Between coats of Briwax I sanded through the paint on some of the edges with 100 grit paper to show wear.  
The shop you see in the layout is my current setup and has evolved over many years to accommodate most importantly the acquisition of newer equipment but also better work flow. It is a free standing two story traditional barn style with office and storage space on the second level. Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools.

After the second coat, I let the table dry completely. Then, I took a 400 grit sanding blog and quickly sanded the top surface and legs. This smooths out any bumps or dust that may have dried in the finish. After sanding, take a damp rag to clean off the sawdust. Lastly, use a clean rag and wipe a very thin 3rd coat on all of the parts you sanded. This will give the table a final shine. Let the table dry and air out for awhile.
I just discovered your site and I’m enamored! You are truly gifted and I love your style. This post really spoke to me because 1. I have sons too 2. We are just about to re-do our kitchen table 3. I just wrote a whole post about our kitchen table on my website. I feel like the kitchen table really is a sacred place for family and it’s beautiful that you built yours together. If you want to read my kitchen table post, check it out at http://kirstenjoyhobbs.weebly.com/homemaker/the-kitchen-table-a-horror-story. Cheers 🙂

A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
×