It's nice to be on your site getting plans and building projects.  I was so inspired by you I went out and bought Ryobi tools, and have since built 3 projects all on http://www.Ana-White.com/ by you.  I loved building the Potting Table, and better yet my Mother loved it when I gave it to her as a gift.  I am now working on the Farm House style Table and Benches.  I can't wait to see how they turn out!  

Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8's. Everything else was kept the same as Ana's plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
Sand the table smooth. Start with 80-grit sandpaper, and move to a finer grit for each pass. You should end with 220-grit. I finished the table with two coats of Jacobean-tinted polyurethane, then buffed on a couple of coats of wax after it was dry. The dark tint hides any scratches or nicks and also makes it look like it was built a century ago. On that note, you can give up your coasters—a little wear will only make your table look better.

A luminaria (often called luminary) is a traditional Mexican lantern made from a paper bag with sand and a candle inside. We’ve add some woodworking panache to these outdoor accents and build our luminarias from wood, with box joints and a star-shaped cutout. They’re beautiful — and reusable — ways to brighten patios, steps and walkways this holiday season.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!

And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
I few years ago I made a build plan for Remodelaholic for a super adorable House Frame Bed. The build plan was inspired by this darling room shared by an Australian magazine, Home Life.  Over the years a few requests have been made for a full size mattress version. Here it is --> How to Build a House Frame Bed - Full Size This bed is designed to fit a full mattress 53" x … [Read more...]
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Actually, you're going to have the opposite problem because you'll meet people who DO cheap out on tools and find they don't work all that well, wear down quickly, and don't last that long. You will want the best of best but not be able to afford them all the time. You will find, more often than not, that some very good tools are available in the mid-priced ranges: not the least expensive but not the most, either. For example, these two sets of chisels are not terribly expensive but well made and a great quality for the price: Marples and the beginner's set I got from Woodcraft that's Made in the USA. You can ask for the nicer ones for Christmas when people ask for ideas. It's good to think of tools as things that you buy once, where possible, but there are some deals to be had.
I have been involved one way or another with woodworking for the last six decades, it began when I was about ten years old, my father built me a jigsaw by modifying an old Briggs and Stratton engine. Looking back I don't believe it cost him anything more than the price of a few welding rods to give me hours of entertainment cutting doodads out of apple box wood. The last three have been limited due to health reasons but I still do small projects when necessary.

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Farmhouse tables are generally designed to be large, but this plan from Addicted2DIY is unique for providing a seating capacity of 10 people. For holidays or parties, if you are inviting a lot of guests, your farmhouse table will be a perfect seating for all enjoying meals together. Of course, you need to have that huge space in your kitchen or living area to keep this table.
There's no better way to give thanks than to gather family and friends around an enormous table to share a feast. A farmhouse table would be the perfect spot. You could make one out of construction lumber and ordinary hardware in a couple of days. We're not talking precision woodworking here. If you can handle a circular saw and a chisel, you can do this. Farmers used to build these tables themselves, not furniture makers or carpenters, so it's okay if it turns out a bit rustic. That's half the fun. The other half is sitting down to eat at a table you built yourself.
Have you ever heard about a chess which is made of wood? If not, then I am presenting a chess which is the most beneficial and attractive one. I am sharing its picture with you and you can make this chess very easily. The most amazing thing is that you can present it as a gift to other fellows. They would surely admire your gift. I am sharing some pictures of this chess; just have a look at these pictures. I am sure you would like these pictures.
This is really wonderful Art of wood. This wooden DIY Art is best for giving gifts for your loved ones. The shape of DIY wooden Art is a heart shape. You can use this as a decoration piece in your showcase. Personally, when I first see this I really like this concept and I suddenly buy it. This is the best gift for the couple. To show love and care you can write a simple message in front of the DIY Art piece. You can write a word or a complete line. For the best result of this image, you can see here for full image.
There's no better way to give thanks than to gather family and friends around an enormous table to share a feast. A farmhouse table would be the perfect spot. You could make one out of construction lumber and ordinary hardware in a couple of days. We're not talking precision woodworking here. If you can handle a circular saw and a chisel, you can do this. Farmers used to build these tables themselves, not furniture makers or carpenters, so it's okay if it turns out a bit rustic. That's half the fun. The other half is sitting down to eat at a table you built yourself.
Use: White vinegar poured into a glass jar with steel wool that you have pulled apart and loosened. After fifteen minutes, brush onto the wood. After the surface is dry, you can leave it as-is or clear coat it with a product like Minwax One Coat Polyurethane. Distress prior to finishing, if so desired.http://www.wikihow.com/Age-Wood-With-Vinegar-and-Steel-Wool
This is really easy and simple project. The person who is entry level in wood working can easily do this by following some steps. You can use this as a decoration piece in your home.The main thing is that you need a full command for using wooden tools and machine.It depends on your taste that what style you are presenting in making alphabets. Visit this link if you want to make this project by yourself. In this link you can see how to make alphabet signs.
This is really easy and simple project. The person who is entry level in wood working can easily do this by following some steps. You can use this as a decoration piece in your home.The main thing is that you need a full command for using wooden tools and machine.It depends on your taste that what style you are presenting in making alphabets. Visit this link if you want to make this project by yourself. In this link you can see how to make alphabet signs.
Once the backings are connected, you can append the 4×4 leg runners. In the event that you have a Kreg HD, then you can simply penetrate 3 1/2″ stash gaps into the 4×4's. If not, you can simply connect them with 3 1/2″ Spax screws from the front countenances of the legs into the runners. You can conceal the screw openings, with the equipment, toward the end.
After cutting the rabbet joints, we walk you through the glue-up and assembly of the box. This critical stage in the process involves applying glue to the box parts and using clamps to hold the parts together while the glue dries. The assembly and glue-up tips that we detail in this episode -- and our companion article -- can apply to the assembly of any woodworking project.
Often when working with wood, after cutting it up and drilling holes the surface will be unfinished with unsightly burs and splinters. This is a simple fix with a quick sanding, but with a seemingly endless amount of types and grits of sandpaper and sanding equipment this can get confusing. The main types of sanders we’ll cover are belt sanders, orbit sanders, and hand sanders.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
This is another simple table design provided by HGTV which you can make without prior woodworking experience. Though simple, it is gorgeous where you can add decorative chairs to make the look of the set even more attractive. Even if you are an expert in carpentry but want to bring that rustic appeal of a farmhouse table, consider this DIY plan. Solid pine wood is recommended because it adds more character to the looks of this farmhouse table. It measures 96 inches in length, 38 inches in width and 30 inches from the floor.

I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color.

Douglas fir from home improvement centers will almost always warp when you try to make a flat top. It is never dried to the same extent as hardwood and ships out for the purpose of being used as framing lumber, not furniture lumber. That said, you can do it, but buy it and let it sit in your garage for a few months or longer to let it further dry and acclimate to your environment. Even better if you plane it down after that waiting period, then allowing it to acclimate for another week or so to make it works out all of its twists prior to being turned into a top. Do you have any hardwood dealers in your area? Try visiting one and make an investment in your table...buy some good maple (soft maple is worlds harder than new douglas fir - you don't need hard maple, ie:or sugar/rock maple).
Choose a light-colored wood with interesting grain for the ball. It should be one solid piece, 2 1⁄2- to 3-in. square. I like to make more than one ornament at a time, so I use a rough blank about 8-in. long in order to make two balls. Make the cap and icicle from a contrasting dark wood that takes fine details. I like to use rosewood or ebony. You’ll need a piece that’s 1-in. square and 8-in. long.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden. 

This video shows the making of wooden hanging with one of the easiest ways. I make this wooden stylish wooden hanging at home easily and decorate with the variety things that give fabulous look to my room. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps. It is actually very easy and interesting to make. Size, shape and design is according to your choice when you made it.
The best thing about the toy chest is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can also modify your kid’s toy chest in any way you want or build in a different design or color different from the one pictured above. You can try some other designs for your plan in the below-mentioned link.
This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.
This may be my longest post to date. But also the largest project, and I have to admit that the work itself was done by my husband and I was merely his helper.  We decided to build a farm table using reclaimed barn wood from scratch. Our first stop was to an awesome secret spot, secret because I’ve been forbidden from sharing its location, to pick out the wood. It’s really no secret, its located in New Jersey. Go ahead and google, it’s easy to find *wink* This place had a huge selection of slabs, doors, and everything wood.  Most of the wood comes from salvaged barns in Ohio! 
I’ve included the option to purchase the amplified plan for $19.99. The amplified plan is a printable plan that will guide you every step of the way and is packed with tips, tricks, money saving options, and answers to frequently asked questions. I know it’s hard to believe but its got even more helpful info than the plans below! Plus it’s a great way to support this site so we can continue to put out free DIY projects every week!

All of our tables are available in the color and finish of your choice.  Our existing color pallet includes 90 paint colors,  multiple stain color options in each workshop collection and several wax color options for our reclaimed woods.  Please feel free to explore all of our paint and stain options to help guide your design plans.  All of paint and stain finishes include a durable water based clear top coat.  This makes it easier to keep the table top clean with a damp sponge (no chemicals!) and provides protection from water rings. (How to Clean a Wooden Dining Table) 
×