This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.
For this lesson on milling lumber, we headed out to the Connecticut Valley School of Woodworking, where instructor Bob Van Dyke demonstrated the classic sequence used to prepare rough lumber with power tools. Sometimes referred to by the acronym "FEE" (faces, edges, ends) the sequence involves flattening one face of the board on a jointer and then creating a parallel, flat opposing face with a thickness planer. After the faces are flat and parallel, square one edge with a jointer and then rip the other edge parallel on a tablesaw. Finally, crosscut the board to length with a miter gauge on the tablesaw.

Table saws, band saws, and radial-arm saws are examples of woodworking machines that are most often used exclusively in a wood shop because they are far too large and cumbersome to be portable. Even though they're confined to the shop, these workhorses are so useful that it makes sense to complete a woodworking project in the shop and carry the finished piece to the location or job site where it will be used or installed.


Beginning with this first episode, our video tutorials, related articles, and projects cover all the basics from choosing your first hand and power tools to setting up a workspace. We'll even get you started building your first projects. You can download free woodworking project plans for a handsome cutting board, a plywood workbench that you can build with just a few tools, and an elegant small box.

This is another simple table design provided by HGTV which you can make without prior woodworking experience. Though simple, it is gorgeous where you can add decorative chairs to make the look of the set even more attractive. Even if you are an expert in carpentry but want to bring that rustic appeal of a farmhouse table, consider this DIY plan. Solid pine wood is recommended because it adds more character to the looks of this farmhouse table. It measures 96 inches in length, 38 inches in width and 30 inches from the floor.


Chances are in any woodworking project, you’re going to have to connect two pieces of material. Screws are ideal for this – much better than nails – but there are hundreds of different types and sizes, all for different applications. We will review the most common types and applications so that you can quickly determine what type you will need for your project and how to use it.
I can't really make good recommendations as to what specific brands of tools are better than others. Most of my tools were opportunistic purchases, with relatively little regard to specific brands. More often than not, it's price and a quick inspection to gauge the solidity of the tool that are the determining factors. My tools are usually not among the best that can be had, but good enough.
One of the most elegant farmhouse tables that can add to your space is this simple design. If you have a large dining space, you can make this rustic design. At least ten people can sit together at this dining table. The dimensions of this table are 96″X41″. The bench and the chairs add character to this farmhouse table. Simply, follow the instructions step by step and shop for the materials required to make this beautiful piece. Kiln-dried pine wood is recommended for this table.

This wood bench plan is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. My neighbor saw a cute wood bench at a local restaurant and wanted one for her house.  She snapped a few pics for me, … [Read more...]
If you have a small space in your kitchen or living space but require a table for dining or if you are fascinated with roundtable designs, you can consider this free DIY plan form Lane Home Co. to be a great option. Not only this table looks nice but also it is very sturdy with layered centered cross base in a V-shape. You might feel the table is difficult to make, but if you have the right tools and carefully follow the instructions, you will be able to accomplish the task easily.
Getting started in woodworking can seem like a daunting task. From specialty woodworking tools to identifying and understanding the different types of wood, there is so much to know that even the old-timers are still developing. But learning and experimenting are what woodworking is all about. Get started on the right foot with some essential basics about safety, tools, lumber, and traditional layout and measuring techniques.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.

After we got all our aggression out on the table, I applied a coat of Minwax pre-stain wood conditioner followed by a custom stain I came up with. I’ve purchased several “gray” stains that are supposed to give the wood a weathered, rustic look, but no matter how many coats I add, the gray barely colors the wood at all. I wanted the table to still be light enough to show all the wood grain, but have that old, weathered look to it, and this is the perfect mix I came up with:

I think this is one of the best feelings if you are successful in making wooden spoon by yourself without any trouble. You can create stylish and unique spoon at home. The only thing is that you just need to follow some steps for making a perfect spoon. In this video, you can see how simply the making of a spoon is and how much you need time for making is explained in this video.

This is another basic farmhouse table design which you can easily build. However, the table is large with a seating capacity of at least ten people. This table is also a great addition to be in your home as it serves many purposes including storage apart from dining. The instructions are provided in two separate parts; first part includes the construction process and the second part includes the finishing touches.


Moving up to the next level, the next machine to get would be a jointer planer. A jointer planer is very important if you want to glue up pieces of wood side-by-side to make panels. It's just plain all around handy for planing stock. I'd recommend you get a jointer planer before you get a thickness planer, because there is so much more that can be done with a jointer than a thickness planer. A thickness planer is really handy to get stock to the right thickness, although in a pinch, that can also be done on the table saw by putting the workpiece between the fence and the blade. If you cut from both sides, you can thickness stock up to twice the maximum depth of cut of your table saw.
This snowman kit post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. The snowflakes are falling softly on the ground. You grab your hat, coat and mittens and head outside to test the snow. … [Read more...]
The blade on a block plane, (click to enlarge drawing) commonly referred to as a plane iron, is mounted with the bevel side up to produce a cutting angle of about 37 degrees in a standard plane and 25 degrees in a low-angle plane. Some block planes feature an adjustable mouth, which allows the plane to be tuned for different cuts; Close the mouth and lower the blade for finish cuts or open the mouth and extend the blade for thicker rough cuts.
This rustic farmhouse table comes with an extension leaf making it extremely functional. When required, you can extend the two end pieces to add extension leaves for additional space on the table and when not in use, simply slide it in. It will cost you around $230-$300 based on the materials which you already have. Though it requires some carpentry skills to get the job done, you can also do it with attention to the detailed instructions provided if you are new to woodworking.
It was murderously hot here in the Charm City suburbs last weekend. The heat index topped a full 115 degrees on Saturday. But fear not, the heat didn’t deter us from tackling our long-awaited shed storage shelves project. We’re excited about this project because we’ve been looking forward to sharing a plywood shelving article for some time now, and this article gives us the perfect avenue for that. In case you’ve forgotten (or more likely if you’ve just started reading here), here’s the new shed. It looks great on the outside, but without some shelving and storage hooks for tools inside, most of the interior space would go to waste.
×