Not at all! I meant to put the total cost in the post, so thank you for reminding me! The wood totaled around $50 for the table and $34 for both benches. We spent another $25 or so on screws and miscellaneous tools, so for about $110, I’d say that’s not too bad!! It took my husband and I a couple hours to build the table, another couple hours to build the benches, and about 2 days to sand, distress, stain, and seal everything.
There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are twenty woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
Having swing in your own home, yard or garden can be so de-stressing and be relaxing a thing to enjoy, that doesn’t matter you have a big yard or patio, or vacant porch. Kids will surely fall in love with this swing porch and love playing on a breezy day. Even, adults also do relax and enjoy a quite morning coffee, or just being embraced by the sun in the swing.
Basically, as you beginner you will need the following tools: a drill, an impact driver, a miter saw and a sander. With these tools you can cut, join and finish wood as a professional. If you want to save time and improve the quality of your work you can upgrade and buy yourself a pocket hole jig, a router, a thickness planer and a table saw. I have created a complete guide with tool recommendations and reviews HERE, so you make an informed decision.
We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.

Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.


I recently came across this beautiful wooden hanging swing, which was made in the square shape. The very first look was enough for me to start loving it. Although I haven’t yet tried building one myself, I am definitely going to. You can also make one for elders and put it in your garden or terrace or anywhere in the house. Elders can use it to relax and the kids can use it to play or sleep. Although this is a really beautiful piece of woodwork, it is not that easy to make. Only someone with good woodworking skill can think of making this swing set.


Avoid machines that can be converted from one machine to another. The ShopSmith is a prime example of such a machine. Multi purpose machines are usually good at one or two functions, but other aspects are compromised. But the real problem is that every time you need to switch functions, you need to convert the machine. And the cost of these machines is usually high enough that you could get several single function machines for the same price.
To finish the table, I first sanded then added a little bit of distressing. Okay… A LOT of distressing. This step was probably the boys’ favorite, because I handed them each a large rock and let them go to town banging the heck out of the table. I wanted the table to look like it’s been around for generations, and all the little nicks and dings add SO much character to the wood.
Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
If you want to get into woodworking, a good project to tackle is building your own workbench. It's really not that hard. So if building your own workbench is a bit too much work, or too intimidating, then take a step back and examine whether you really want to get into woodworking. This may be different if your goal is to cut silhouettes of kittens out of plywood with a scrollsaw, but I wouldn't call that sort of activity "woodworking".

In episode 10 of our series, Getting Started in Woodworking, we complete our first season with a demonstration on how to apply an oil-and-wax wood finish. This finishing recipe is extremely simple and very effective. It will work for about 95 percent of the projects most woodworkers build; the only exceptions are surfaces that need to take a lot of abuse, such as a dining table tabletop.
You can n enjoy this stylish sofa side table. I have made such a square table at home easily. You can carry it anywhere and decorate by putting beautiful and stylish lamps. It is actually very easy and interesting to make. Size, shape and design are according to your choice when you made it. You can take the benefit of carrying it. Have a look at the image to get the idea of making it. Surely you would enjoy having it. These wooden items give stylish look to my interior furnishing. You can also make wonderful variety of wooden tables easily at home. It is actually very stress-free and interesting to make.
Hardwood boards and softwoods may look similar in shape and dimension, but they are sold using completely different measuring systems. Softwoods are typically sold in standard lumber dimensions (such as a 2x4), whereas hardwoods are most often sold by the board foot. Calculating board feet helps you guarantee that you're getting your money's worth on every piece of hardwood you purchase.

Doing fine. I don't expect the pocket screws to fail or loosen over a typical period of time. They make a very solid joint especially if you also glue the joint. Compared to mortise and tenon a pocket screw will fail sooner under severe stress, however they are easier to repair than M&T which blow out. So I expect long use from this table unless a bunch of heavy people start dancing on it and the old wood will probably break first.
It was murderously hot here in the Charm City suburbs last weekend. The heat index topped a full 115 degrees on Saturday. But fear not, the heat didn’t deter us from tackling our long-awaited shed storage shelves project. We’re excited about this project because we’ve been looking forward to sharing a plywood shelving article for some time now, and this article gives us the perfect avenue for that. In case you’ve forgotten (or more likely if you’ve just started reading here), here’s the new shed. It looks great on the outside, but without some shelving and storage hooks for tools inside, most of the interior space would go to waste.
A track saw will allow you to make many cuts that would otherwise require a table saw, and is hard to beat if you need to cut up whole sheets of plywood. But for the price of a track saw, you can buy a table saw, and table saws are so much more versatile and convenient. So if you are just starting out, don't let anybody tell you that you don't need a table saw if you have a track saw. Save the track saw purchase for later.
Chances are in any woodworking project, you’re going to have to connect two pieces of material. Screws are ideal for this – much better than nails – but there are hundreds of different types and sizes, all for different applications. We will review the most common types and applications so that you can quickly determine what type you will need for your project and how to use it.
If your space is very limited in your living or kitchen, you will love this farmhouse table design which can also be used as a kitchen island. This feature makes it perfect for keeping it in the kitchen space. If you have some woodworking skills, consider making pocket holes without adding 2×2 supports as in the original plan which saves both money and time. In this process, you will not have to drill or cut more holes, and all the screw holes can be hidden providing a better finish.
You can decorate your garden, terrace and corners of your house by stylish wooden hanging swings. These wooden items give a unique touch to your house. You can also make wonderful variety of wooden swings easily at home with the help of tutorials. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these hanging swings by joining equal size wooden pieces. You can also do easily. This creative project is entertaining as well as good activity at the same time.
This Privacy Policy covers CanadianWoodworking.com's treatment of personally identifiable information that CanadianWoodworking.com collects when you are on the CanadianWoodworking.com site, and when you use CanadianWoodworking.com's services. This policy also covers CanadianWoodworking.com's treatment of any personally identifiable information that CanadianWoodworking.com's business partners share with CanadianWoodworking.com.

For the legs, we purchased black steel gas pipes which had to be measured and cut to size.  After the steel pipes were cut they had to be manually threaded with a pipe threader.  Gas fittings were used to connect the piping. This step resulted in a few choice bad words, it seems you can actually get them already threaded. But why should we take the easy route, when we can make ourselves crazy instead.

A block plane is probably the first hand plane you'll use when getting started in woodworking. It's a relatively affordable hand tool and it's versatile. Plus, its diminutive size makes it easy to use with one hand for all types of woodworking tasks, including smoothing edges, breaking corners, trimming one surface flush to another, cleaning up end grain, and fitting joinery.
To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
If you need more inspiration for your next woodworking project, check out Ted's Woodworking Plans package. It has a massive collection of 16,000 projects with breathtaking step-by-step instructions, blueprints, photos and videos. We definitely got a lot of joy from creating some beautiful projects over the years and we hope you'll feel the same way.
You can decorate your garden, terrace and corners of your house by stylish wooden hanging swings. These wooden items give a unique touch to your house. You can also make wonderful variety of wooden swings easily at home with the help of tutorials. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these hanging swings by joining equal size wooden pieces. You can also do easily. This creative project is entertaining as well as good activity at the same time.

Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes.
Liz, Great job on your new table and benches. They really look great. Love the chandelier also. Wanted to let you know that after I saw your tutorial on the board and batten in your living room and dining room, it really inspired me. I said to myself, “I can do that.” So, with that in mind, I am just finishing up board and batten in my laundry room. It was really an easy project and I love the results. It really perks up a drab old laundry room. I ended up doing all the work myself. The only help I asked my husband for, was with the nail gun, as we had to really get into some tight places. All in all, though, I am very pleased with it. Thanks for the idea.
Finally, a word on glues: You might want to do some experimenting with polyurethane glue instead of aliphatic resin (wood) glue. Polyurethane glues require a slightly different work flow, but since switching to polyurethane about 15 years ago, I can't see going back. I use aliphatic glues for some things (like biscuit joints) - but not very often. Polyurethane glues actually harden (aliphatic resins remain "liquid"), poly takes stain like wood (no bright areas where the stain wouldn't bond to the glue lines), poly doesn't dull tools or gum up sandpaper, poly is waterproof and can fill minor gaps. My favorite brand, so far, is Gorilla Glue.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
While metal machinists’ straightedges are ideal for setting up woodworking machinery, their high-tolerance accuracy and weight are overkill for most woodworking tasks. For centuries, shop-made wooden straightedges handled many layout and testing chores, and the tools are still useful today. Wooden straightedges are lightweight, simple to make in any size and can be easily trued with common workshop tools. While straightedges that resemble the machinists’ versions – essentially a skinny rectangle with parallel edges – are useful, these tend to go out of square quickly as the seasons change. However, by understanding a bit about the way wood works, you can make a wooden straightedge that is both accurate and durable.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
For the legs, we purchased black steel gas pipes which had to be measured and cut to size.  After the steel pipes were cut they had to be manually threaded with a pipe threader.  Gas fittings were used to connect the piping. This step resulted in a few choice bad words, it seems you can actually get them already threaded. But why should we take the easy route, when we can make ourselves crazy instead.
Now a day, it is not difficult to decorate your living places. We can decorate walls with beautiful and attractive wooden hangings. I am actually making one of these wooden hanging piecesfor my home. It is totally cool and creative work. We can make these eye-catching wooden hangings at home easily by using some common tools. This is the easiest way to spice up your walls. By doing this you can give style to your walls as well as mention your address on it.You can also make amazing pieces of wooden art easily at home. Although you can imagine that this is only possible for a carpenter or woodcarver. But it is not. It is actually very easy to make one.
I recently met  a man  known among local woodworkers for having a large workshop with a lot of tools. He offered to show me his workshop, and  take photographs of it. His workshop covers the entire basement of a large 1800 square foot bungalow. It's difficult to capture this workshop in just a few photos, so I figured I'd include a large number of photos.

This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
The original plans for the project are from Ana White's website, who has hundreds of free plans available. I modified the table by making the table wider and longer. The larger size provides more space to spread out and for food or a centerpiece in the middle. This table has been a conversation piece and has worked great for our dinner parties and meals. This farmhouse table will last for years and will be able to be passed on to family members for generations. Whitney from Shanty-2-Chic also has a post about creating this table and she collaborated with Ana-White on her project.
Liz Fourez started Love Grows Wild in 2012 with a passion for interior design and homemaking and a dream to help others create a home they love.  From simple project tutorials, to holiday and entertaining ideas, to her journey renovating a 1940’s farmhouse, Liz demonstrates how to create a beautiful and inviting home with a handmade touch. She turned her signature cozy, neutral style into a best-selling book in 2016 and continues to inspire readers with her captivating photography and easy decorating ideas. Read more about Liz > > > >

Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
In my project section I wrote an article about small boxes made with a router. The article was written years ago and the boxes were made several years before that. Thus, I had to use one of those old boxes to write this article as I couldn't exactly remember how I made them. The initial construction process came from that great Canadian TV show, The Router Workshop, but the jig I use was born of necessity. One year I decided to build a pile of these boxes and enter a craft fair. After two or three, I decided there had to be a faster way to set up for the cuts, so I used a discarded table saw sled to fashion the jig in this article.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
After cutting the rabbet joints, we walk you through the glue-up and assembly of the box. This critical stage in the process involves applying glue to the box parts and using clamps to hold the parts together while the glue dries. The assembly and glue-up tips that we detail in this episode -- and our companion article -- can apply to the assembly of any woodworking project.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
This Privacy Policy covers CanadianWoodworking.com's treatment of personally identifiable information that CanadianWoodworking.com collects when you are on the CanadianWoodworking.com site, and when you use CanadianWoodworking.com's services. This policy also covers CanadianWoodworking.com's treatment of any personally identifiable information that CanadianWoodworking.com's business partners share with CanadianWoodworking.com.

I’ve included the option to purchase the amplified plan for $19.99. The amplified plan is a printable plan that will guide you every step of the way and is packed with tips, tricks, money saving options, and answers to frequently asked questions. I know it’s hard to believe but its got even more helpful info than the plans below! Plus it’s a great way to support this site so we can continue to put out free DIY projects every week!

There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are twenty woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.


This saw has changed my life. I literally cannot even tell you who I am anymore. I have been reborn, and into a world where the lion lays with the sheep in euphoric happiness and cooperation. The skies are bluer now than ever before. My tastebuds have been supercharged; my skin feels tingly all through the day; my mind has been freed and I have new purpose and resolve.
In episode 10 of our series, Getting Started in Woodworking, we complete our first season with a demonstration on how to apply an oil-and-wax wood finish. This finishing recipe is extremely simple and very effective. It will work for about 95 percent of the projects most woodworkers build; the only exceptions are surfaces that need to take a lot of abuse, such as a dining table tabletop.

All of our tables are available in the color and finish of your choice.  Our existing color pallet includes 90 paint colors,  multiple stain color options in each workshop collection and several wax color options for our reclaimed woods.  Please feel free to explore all of our paint and stain options to help guide your design plans.  All of paint and stain finishes include a durable water based clear top coat.  This makes it easier to keep the table top clean with a damp sponge (no chemicals!) and provides protection from water rings. (How to Clean a Wooden Dining Table) 


The original plans for the project are from Ana White's website, who has hundreds of free plans available. I modified the table by making the table wider and longer. The larger size provides more space to spread out and for food or a centerpiece in the middle. This table has been a conversation piece and has worked great for our dinner parties and meals. This farmhouse table will last for years and will be able to be passed on to family members for generations. Whitney from Shanty-2-Chic also has a post about creating this table and she collaborated with Ana-White on her project.
No doubt many of us would love to have a huge, 2000 square foot building devoted to woodcraft, on a wooded acreage somewhere. But there is a reality that goes with a hobby shared by numerous ordinary people: very few really have the means to set up such palatial workshops. We have our lives to lead, and engaging in such a venture is out of the reach for most, myself included. This article is dedicated to workshops for "the rest of us."
Hand saws are a good option for making quick cuts that don’t need to be perfectly straight. They do take some muscle as they are non-powered, but are perfect for a quick job. The downside to hand-saws is you will need a different saw for each type of material you need to cut, so if you’re trying to cut wood and sheet metal, that’s an additional cost.
×