This project requires a fair amount of turning experience. If you’re patient, however, you’ll find that making this ornament is a good way to learn new techniques. Shaping a delicate spindles takes practice, but you can make up the shape of the icicle as you go. If you’ve never hollowed a vessel before, this ball is an easy first project—the inside doesn’t have to be smooth and polished. The ball is hollow to reduce its weight.
This free DIY plan is primarily designed for use in outdoors especially in the springtime. Cedarwood is recommended because it can withstand the natural elements and the boards are designed to have gaps between them so that it allows drainage. If you want to make an indoor farmhouse table with this plan, simply use the top design as used in the J-pedestal table and do not keep any gaps between the boards.

If you are a starter, this is another design you can consider to build. The step by step instructions provided by Boxy Colonial are easy to follow, and the list of materials and tools are also provided. This farmhouse table can be used for any purpose like reading or writing, playing cards, eating, or any other activities where you need a table. Six people can easily sit at the table together.
Because the legs I used are rather large and chunky, I wanted my apron to be larger than normal so it looked proportional.  Typically, a 2×4 is fine for an apron, but I used 2x6s and cut them down to 4 1/2″ wide using a table saw.  A standard 2×6 is 5 1/2″ wide.  You could leave it at 5 1/2″, just keep in mind the chair height and make sure you will have enough leg room to slide under.  If you wanted a less chunky leg, Timber Wolf has many other options on their website 🙂

To be honest I'm not entirely sure of all the wood species because it was repurposed wood. The legs were from cedar 4x4 cutoffs and the aprons were from barn wood which I think was poplar. The top is from wood I helped salvage about 40 years ago as a kid and I'm not sure what type it is. It could be fir. I think the most important thing is to use wood that is dry and straight. Kiln dried is good. If I was going to Home Depot I'd buy pine for the legs and aprons and poplar for the top if planning to paint it. Poplar is much harder and therefore more durable than pine, however, a pine top would work too. Pine is cheaper than poplar. Douglas fir is also softer than poplar if you anticipate a lot of wear and tear. Pine and poplar are more difficult to stain evenly, but you could leave it natural and use a polyurethane to protect it.


Super Chunky X Table Plans and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Ridgid MegaMax, Diablo blades, Bosch drill bits and Makita … [Read more...]

To finish the table, I first sanded then added a little bit of distressing. Okay… A LOT of distressing. This step was probably the boys’ favorite, because I handed them each a large rock and let them go to town banging the heck out of the table. I wanted the table to look like it’s been around for generations, and all the little nicks and dings add SO much character to the wood.


We tested this out on an old bathroom vanity - as we are over-capitalized on our home and just can't afford a full bathroom remodel. I lightly sanded the vanity, applied 4 coats of stain (allowing them to dry at least 24 hours between coats)with a foam brush, and switched out the vanity hardware. BEAUTIFUL! Our vanity looks brand new and very contemporary! This is a huge upgrade from that 90's "golden oak" color that is everywhere in our house.
If you’re looking to show off you’re woodworking skills and you have a piece of wood with a beautiful linear grain pattern, then this box project is a great choice. It’s a more refined box design, and as you might expect, it’s a little more challenging to build than the simple keepsake box presented earlier on this gift list. The sides are constructed so that the wood grain flows smoothly across one face, around the corner and into the adjoining face — and all the way around the box without a break — the grain itself becomes a major part of the design. The design is also enhanced by tapering the box sides, allowing the eye to more easily take in the continuous run of grain at the corners.
Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here
Hi Nancy! I only looked specifically for rectangular tables – sorry!! I do know the blog Little Red Brick House made a round farmhouse table but I couldn’t find instructions for it. Maybe reach out to her and she could give you more details? Here’s the link to her post: http://littleredbrickhouse.com/industrial-farmhouse-dining-room-makeover-one-room-challenge-reveal/ Thanks for stopping by!
About the video, your opening photo showed a leg pedestal so I though your first "mistake" would be about the built-in stress points inherent in that particular design. The timbers are quite robust so it is probably not an issue for everyday use, however the side stresses pressing down on the table's front and rear edges would be concentrated angularly at the center mortise and tenon location on the vertical posts. This could lead to cracks developing at those locations in time, depending on the loads placed on the table. I suggest a back-to-back "capital letter K" design for future tables that would distribute the loads more evenly across the timbers and avoid stress cracks.

The owners, webmasters, administrators, authors and editors, expressly disclaim all and any liability to any person, whether a user of this website or not, in respect of anything and of the consequences of anything done or omitted to be done by any such person in reliance, whether whole or partial, upon the whole or any part of the contents of this website. Please exercise caution when working with any tools or machinery. Follow common safety rules and precautions as outlined in any manuals related to the equipment being used. If advice or other expert assistance is required, the services of a competent professional person should be sought.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools. Next to the radial arm saw and in the corner is the floor drill press with accessory storage next to it for all drilling operations.  Across from the radial arm saw is a separate workstation set up with a small portable table saw and router set-up with storage underneath for routers, bits and accessories.
This wood bench plan is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. My neighbor saw a cute wood bench at a local restaurant and wanted one for her house.  She snapped a few pics for me, … [Read more...]
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors. 

The article explains step by step process for making this awesome piece of wooden art. It is actually very easy to make one.This tutorial shows the making of wooden box with one of the easiest ways. However, it is a bit difficult to make them, but not so much.I make this wooden box at home easily. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps.
Use: White vinegar poured into a glass jar with steel wool that you have pulled apart and loosened. After fifteen minutes, brush onto the wood. After the surface is dry, you can leave it as-is or clear coat it with a product like Minwax One Coat Polyurethane. Distress prior to finishing, if so desired.http://www.wikihow.com/Age-Wood-With-Vinegar-and-Steel-Wool
If you want to buy this project, you can easily contact here. The person who is entry level in woodworking project can feel trouble for perfect making, but if you know the step by step procedure you will never face any kind of difficulties. In this link, you will find a different style of chair plus table and personally, I like this style of the project hope you will also like it.
If you don’t have a large space for dining, you can check this plan. This design from Instructables is very basic to make and can easily fit in your small space. However, it has the capacity for six people to sit together at the table. The cost depends on the type of lumber you are using; construction grade pine wood might cost around $50, and if you are using furniture grade lumber, it might cost approximately $120.
Use: White vinegar poured into a glass jar with steel wool that you have pulled apart and loosened. After fifteen minutes, brush onto the wood. After the surface is dry, you can leave it as-is or clear coat it with a product like Minwax One Coat Polyurethane. Distress prior to finishing, if so desired.http://www.wikihow.com/Age-Wood-With-Vinegar-and-Steel-Wool 

Learning from the ideas of other woodworkers, while avoiding their mistakes is an excellent way to design and set-up your own shop layout. Setting up a woodworking shop as a hobby place, or for a some one more serious, who even may venture off into some sort of woodworking business; is not as easy as it might sound. Knowing the correct steps to follow will save you time and money, but it will also save you a lot of stress down the road.
This Farmhouse Side Table post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. Building a new farmhouse side table to go along with my farmhouse coffee table has been on my list for a … [Read more...]
The table top was then sealed with multiple coats of Varathane for protection.   We chose not to add a stain to the top because its natural coloring is gorgeous already.  There are shades of browns and grays in the wood along with saw marks from the original milling, knots, and grooves that you would come to expect from a reclaimed barn wood table.
If you are looking for a simple design for making your farmhouse table where you can have additional space to make more people sit, this plan could be ideal for you. The benches give you this option to allow a few more people to squeeze in. This table fits excellently in your contemporary space. This plan can be executed by any beginner, and you are also provided with square sized table and benches.
×