In my project section I wrote an article about small boxes made with a router. The article was written years ago and the boxes were made several years before that. Thus, I had to use one of those old boxes to write this article as I couldn't exactly remember how I made them. The initial construction process came from that great Canadian TV show, The Router Workshop, but the jig I use was born of necessity. One year I decided to build a pile of these boxes and enter a craft fair. After two or three, I decided there had to be a faster way to set up for the cuts, so I used a discarded table saw sled to fashion the jig in this article.
Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.
The article explains step by step process for making this awesome piece of wooden art. It is actually very easy to make one.This tutorial shows the making of wooden box with one of the easiest ways. However, it is a bit difficult to make them, but not so much.I make this wooden box at home easily. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps.
Hand saws are a good option for making quick cuts that don’t need to be perfectly straight. They do take some muscle as they are non-powered, but are perfect for a quick job. The downside to hand-saws is you will need a different saw for each type of material you need to cut, so if you’re trying to cut wood and sheet metal, that’s an additional cost.

In this month’s woodworking project demonstration, George Vondriska teaches you the step-by-step process for building a coat tree that will look great in your home or workshop. He demonstrates the simple techniques for installing wrought-iron hooks, crafting the coat tree’s feet, and quarter sawing to achieve that beautiful face grain on all four sides.
Most importantly you need to began by tearing the majority of the 2×6 sheets to 5″ and the 2×4's to 3″. This is not an important stride but rather it makes for pleasant straight edges and permits to shroud the creases on the stout table legs that individuals frequently assembled. The arrangements depend on tearing these sheets so on the off chance that you don't tear them, make a point to change the estimations as needs be.
During the late Victorian era, wooden items for decoration started to attain popularity. Wood is having a significant role in our life. These wooden items give a classy look to your interior furnishing as well as carry different items. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work.. It is actually very easy and interesting to make. Size, shape, design and number of compartments are according to your choice when you made it.
One of the most elegant farmhouse tables that can add to your space is this simple design. If you have a large dining space, you can make this rustic design. At least ten people can sit together at this dining table. The dimensions of this table are 96″X41″. The bench and the chairs add character to this farmhouse table. Simply, follow the instructions step by step and shop for the materials required to make this beautiful piece. Kiln-dried pine wood is recommended for this table.
In regards to your breadboard ends: You might be able to get away with what you did depending on how dramatic the humidity difference between seasons is in your area, but in the future, you might want to elongate your dowel holes in the tongue of the joint - all but the center hole. Specifically, you want to put a pin in the center of the table end (no hole elongation) and then elongate the holes on either side - maybe 1/16" to each side of center (it's OK to glue the center like you did). This allows the center pin to keep the board centered (duh) and then allows the table top to grow and shrink across it's width without putting undue stress on the breadboard ends. This is important because wood expands/contracts across it's grain significantly more than it does along it's length, so when you have a joint where end grain meets side grain (as in your breadboard ends) NOT taking this into account can mean that your project disassembles itself - or at least becomes "rickety" as the expansion/contraction cycle loosens the joint. The amount of growth you can expect is determined by wood species, initial moisture content of the wood, and humidity change across seasons. There are online references you can check to see how much you would want to elongate those holes.

All of our tables are available in the color and finish of your choice.  Our existing color pallet includes 90 paint colors,  multiple stain color options in each workshop collection and several wax color options for our reclaimed woods.  Please feel free to explore all of our paint and stain options to help guide your design plans.  All of paint and stain finishes include a durable water based clear top coat.  This makes it easier to keep the table top clean with a damp sponge (no chemicals!) and provides protection from water rings. (How to Clean a Wooden Dining Table) 

Nominal size means the dimension of the lumber “in name only.” In other words, the lumber is called a certain size, even though its true size is smaller. For example, a piece of lumber is called a 4x4 at the store, even though it is only 3 ½” x 3 ½” if you were to measure it with a ruler.http://www.familyhandyman.com/carpentry/making-sense-of-lumber-dimensions/view-all
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
This box is the fifth generation of this design. After each production run of about 20 boxes, I make slight design changes to enhance the look and simplify the machining. Any hardwoods would work, but since the box uses so little lumber, I prefer to incorporate highly figured woods. For safety, ease of construction and consistent cuts, I use a jig for bevel-cutting the legs and another jig for beveling the top surface of the lid.
Personally identifying information is information that can be used to identify who you are such as: name, mailing address, email address. To enter certain areas of the site, you will be required to register and provide information about yourself. This information is for the purposes of Canadian Woodworking and helps us to tailor the site to best meet the needs of our audience. 
If you are looking to make a large table for dining or celebrating ceremonies with many guests, the J-pedestal dining table can be a great choice. The design was inspired by a Pottery Barn. This gorgeous table adds class to your space which your guests will also praise. Though the materials can be purchased at affordable prices (costing around $125), you need to have good carpentry skills to make it and also the process is time-consuming. Southern Yellow Pine is recommended to use for the top because not only it is inexpensive but also it is strong and durable.
Actually, you're going to have the opposite problem because you'll meet people who DO cheap out on tools and find they don't work all that well, wear down quickly, and don't last that long. You will want the best of best but not be able to afford them all the time. You will find, more often than not, that some very good tools are available in the mid-priced ranges: not the least expensive but not the most, either. For example, these two sets of chisels are not terribly expensive but well made and a great quality for the price: Marples and the beginner's set I got from Woodcraft that's Made in the USA. You can ask for the nicer ones for Christmas when people ask for ideas. It's good to think of tools as things that you buy once, where possible, but there are some deals to be had.
Table aprons are the boards that make up the sides of the table base and connect the legs.  They are also called table skirts.  Dimensions are 3 1/2" wide and 22 1/4" long across the ends and 62" long down the sides.  For a 34x72 inch table and 4x4 legs, these apron lengths inset the legs roughly 2" on all sides.  The wood is 3/4" to 1" thick rough-cut wood from our old barn.  The red color was a little stark so I sparsely brushed a coat of chalk paint on and waxed again with Briwax.
Creating custom picture frames for friends and family is a great gift giving project that's sure to please even those difficult to shop for gift recipients. Everyone has a special photo or keepsake they've meant to have framed. Making a custom frame to match may be the best gift of the season. Best of all, it's a quick and simple project to complete with the right tools and set up.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
Scrollsaws are good for projects like cutting puzzles or silhouettes of cutesey animals out of wood. But for making furniture, scrollsaws just aren't up to the task. Scrollsaws, along with Dremel tools, do have their uses in crafts, but for woodworking, they are just a little too small. That said, Dremel tools are very useful for sharpening brad point drill bits, forstner bits, and bandsaw blades, so they do have a use in woodworking.
You’ll need to buy 4×4, 2×10, and 2×4 boards for this project. These boards can be found at your local lumber yard. Take your time to find quality boards that are straight and have little warp. First, I built the table top out of 2x10s. I used 5 2×10’s for the main part of the table and a 2×10 for each breadboard end. Ana’s plans call for four main boards, but I wanted a little larger area to spread out. I used a 12″ miter saw to make all of the cuts. I cut the 5 boards to 69 inches long.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.

You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂

Backpack storage and organizer Plans and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Milwaukee hammer drill/impact combo, Diablo … [Read more...]
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
​Luckily, we have also managed to find a detailed video tutorial of the Barn door project that illustrates the process of building a Barn door of your own. The steps and instructions in the video tutorial are different from the source links listed above. Actually, you can make different types of designs for your Barn door depending on which one you can afford easily and DIY on your own.
Here’s a rundown of the 5 most important beginner woodworking skills to help you get started. When you’re done, have a go at our custom sit-stand desk DIY Sitting / Standing Desk DIY Sitting / Standing Desk Read More . For other MakeUseOf DIY projects, you’ll probably need some electronics skills Beginner's Electronics: 10 Skills You Need to Know Beginner's Electronics: 10 Skills You Need to Know Many of us have never even touched a soldering iron - but making things can incredibly rewarding. Here's ten of the most basic DIY electronics skills to help you get started. Read More , too.
This was not actually a tutorial post to the woodworking plan ideas but the aim of the post was to give some easy and free woodworking ideas to the readers. If you have some time to entertain yourself and also willing to add some new stuff to your furniture you can take any idea from the list and start working on it. Be sure to see both post tutorial and video tutorials of the plan you have selected, it will make you understand everything nicely.
Greet your guests with a happy group of snowmen made from a 4”x4” fence post. Just paint them, and then accessorize with socks for hats and flannel for scarves, like this snowman family by A Mommy's Life With a Touch of Yellow. They’ll look great for the entire winter season on an entryway table, a mantel, or a front stoop, even after the snow melts.
With a little woodworking knowledge and use of some basic items, you can build a wonderful tissue box holder of your own. You can easily build them in bulk and then sell at good rates. Although easy, a wooden tissue box is an equally important and useful item for households. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. These wooden items give a classy look to your interior furnishing. This is the easiest way to spice up your tables with beautiful wooden tissue boxes. By doing this you can give style to your table settings.
To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
As you can see in the image, this beautiful heart shaped wall hanging wooden piece on the wall. It looks beautiful and can be used to surprise someone special. The shape and design of this wooden hanging depend on how properly you build it. First time workers definitely need some guidance to help them with the process. You can choose the wood type, color and design as you like for your project. You can easily make it at home by using some artthings. You can decorate your wall hangings with different materials, designs and styles. I am actually making one of this wooden heart shaped hanging in my home. It is perfectly cool and artistic work. These hangings may be adjustable or a fixed. 

One of the most elegant farmhouse tables that can add to your space is this simple design. If you have a large dining space, you can make this rustic design. At least ten people can sit together at this dining table. The dimensions of this table are 96″X41″. The bench and the chairs add character to this farmhouse table. Simply, follow the instructions step by step and shop for the materials required to make this beautiful piece. Kiln-dried pine wood is recommended for this table.
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!
Beginning with this first episode, our video tutorials, related articles, and projects cover all the basics from choosing your first hand and power tools to setting up a workspace. We'll even get you started building your first projects. You can download free woodworking project plans for a handsome cutting board, a plywood workbench that you can build with just a few tools, and an elegant small box.

You can decorate your garden, terrace and corners of your house by stylish wooden hanging swings. These wooden items give a unique touch to your house. You can also make wonderful variety of wooden swings easily at home with the help of tutorials. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these hanging swings by joining equal size wooden pieces. You can also do easily. This creative project is entertaining as well as good activity at the same time.


Furnishing and decorating your patio is not an easy task – but then again, it has to be done! Your patio is obviously one of the most important rooms in your home, as you can easily turn it into your little piece of Heaven, your “safe spot” in your home where you can retreat whenever you want to ignore the world and just spend some time alone all by yourself.
Block planes range in quality and price from hardware-store versions that cost around $35 to high-end brass planes that cost as much as $250. While the higher-priced models are likely to perform better out of the box and include higher-quality machining and parts, low-cost block planes can perform well if tuned up properly using the techniques detailed in this episode.
This is another very simple and traditional farmhouse table which is extremely strong and durable with no wobbling. Also, from the very look of the table, you can understand that this project will be very to make. This plan has been inspired by Ana White’s DIY plan and modified by DIYPete making the design a unique one. The two benches make the table look simpler and also provide ample seating capacity.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
In regards to flattening the top, another technique would be take a pencil (soft lead) and lightly draw some big lazy squiggles across the top - enough so that there is a line every few inches. Then, use either a jointer plane or a belt sander to flatten the top until the squiggles are gone. The lines give you a reference to what is high and what is low - and when you are finished in a particular area. With the jointer plane, you want to stroke at about 45 degrees to the grain of the wood, and with a belt sander, you want to keep the sander flat on it's platen (don't let it tilt and dig in) and use wide, arcing, sideways sweeps with very light pressure - again at about 45 degrees to the grain of the wood - never let the sander start or stop when in contact with the surface. In both cases, finish with light sanding with either a belt sander, linear sander, or by hand, stroking in the direction of the grain. Palm sanders can leave swirls.

This Privacy Policy covers CanadianWoodworking.com's treatment of personally identifiable information that CanadianWoodworking.com collects when you are on the CanadianWoodworking.com site, and when you use CanadianWoodworking.com's services. This policy also covers CanadianWoodworking.com's treatment of any personally identifiable information that CanadianWoodworking.com's business partners share with CanadianWoodworking.com.


Isn’t it amazing to have a wooden bangle in your hand? I am sure you would like this bangle and would love to wear it. This type of bangle is very rare and it is also very durable. It cannot be broken very easily. You can see the different designs of this bangle and can enjoy wearing it. I am sharing some of the pictures of these bangles; just have a look at these pictures and start your project. These pictures are for your help. So, have a look at these pictures for getting an idea on its making.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes.
You can create a simple and affordable eye catching frame for your artwork out of a great old wooden ladder. Simply turning the ladder on its side will allow you to display quite a lot of art in a row for so little money. This simple home decor craft project is an affordable way to introduce color, the vintage look, and even some architectural interest without costing a fortune.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all. If you'd rather use a stain, Minwax has some great choices to choose from. A couple of my favorites are Special Walnut, Dark Walnut, Provincial, Weathered Grey, and Golden Oak.
To start, make a base assembly out of the aprons, legs, and stretchers. Attach one leg on either side of one of the short aprons. Bore two holes for pocket screws into each side of the apron's back, four in total (fig. 1). Clamp the legs to the apron, but add a ⅛-inch piece of wood to the front as a spacer (fig. 2). This will offset the face of the apron from the face of the leg, pushing it back a bit and creating a nice dimensionality. Drive the pocket screws through the apron into the leg. Repeat the same procedure for the second leg–apron assembly.

To be honest I'm not entirely sure of all the wood species because it was repurposed wood. The legs were from cedar 4x4 cutoffs and the aprons were from barn wood which I think was poplar. The top is from wood I helped salvage about 40 years ago as a kid and I'm not sure what type it is. It could be fir. I think the most important thing is to use wood that is dry and straight. Kiln dried is good. If I was going to Home Depot I'd buy pine for the legs and aprons and poplar for the top if planning to paint it. Poplar is much harder and therefore more durable than pine, however, a pine top would work too. Pine is cheaper than poplar. Douglas fir is also softer than poplar if you anticipate a lot of wear and tear. Pine and poplar are more difficult to stain evenly, but you could leave it natural and use a polyurethane to protect it.
I know you hate to ask for anything, but when it comes to woodworking it will bear you in good stead. You know that, when it comes to computers and carpentry, your grandfather has probably already done it. Call him and ask. Fortunately, there are also a lot of (and will be more) people online who are older than 30, many of whom are retired and lucky enough to be able to spend a lot of time online in woodworking forums answering questions instead of boring day-job office applications. They are helpful, generous and kind. You should approach them earlier and often. One of them will also point you to a veritable treasure trove of saws, and a master saw restorer and seller.
From the source tutorial, you can get illustrates to the instruction about the plan. Everything is fairly described as diagrams, images, the list of supplies and tools need etc. The process to this plan is very easy to understand and follow for if you are having some basic woodworking knowledge. Make sure to collect all the supplies you need before you start with the project. You may even ask any question directly in the comment section of the tutorial post and also comment the images of your final product if you have completed it. Either way, I hope that you will manage to build this one nicely.​
My table saw cannot cut a leg this thick without making 2 passes so I tapered them on my bandsaw.  The bandsaw leaves a rougher finish and that looked even better on this rustic table.  I made a quick and dirty jig to cut the legs which you can see in pic 3.  The jig has a runner which slides in the miter track of the bandsaw table.  Two hold downs were sufficient to secure the leg to the jig.  I anchored an L-shaped block & a long block for positioning the leg on the jig.  Once you've cut away 2 sides, the long block is no longer accurate and it becomes necessary to line up your mark on the bottom of the leg with the edge of the jig before clamping.   

Not every woodworking shop have sawhorses, but you'll find them a useful and versatile item to have at hand. A sawhorse can be used as a short-term table, workbench or benchtop stand, and can be use as a workbench extender or to as a temporary lumber self. Build your own sawhorses allows you to customize them to your own needs and wood shop requirements.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!
This wooden sofa side table can also be made in different sizes and shapes as you can find on the internet. Some of the items you will need for this project are wooden pieces, cutter, screws, etc. We have included a video tutorial here that illustrates the process of building a wooden sofa side table. This is not the exact one that you see in the image above, but it can be modified to build any shape or design you want. The video tutorial also has English subtitles to make it easy for anyone to understand and follow the steps.
It was murderously hot here in the Charm City suburbs last weekend. The heat index topped a full 115 degrees on Saturday. But fear not, the heat didn’t deter us from tackling our long-awaited shed storage shelves project. We’re excited about this project because we’ve been looking forward to sharing a plywood shelving article for some time now, and this article gives us the perfect avenue for that. In case you’ve forgotten (or more likely if you’ve just started reading here), here’s the new shed. It looks great on the outside, but without some shelving and storage hooks for tools inside, most of the interior space would go to waste.
×