There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are fifteen woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.
If you are looking for a simple design for making your farmhouse table where you can have additional space to make more people sit, this plan could be ideal for you. The benches give you this option to allow a few more people to squeeze in. This table fits excellently in your contemporary space. This plan can be executed by any beginner, and you are also provided with square sized table and benches.
If you want a small farmhouse dining table with an interesting style, this DIY Farmhouse Table Plan from Rogue Engineer is brilliant to try. The design comes with a simple base but has double angles making it interesting. Though the dining table is small, it can easily accommodate four people in a narrow area. Even six people can also sit closely. You can modify the design for a wider or longer table by simply lengthening the required pieces.

The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
From day one you've wondered how can you be both a tree hugger and a woodworker, how you can respect nature while also using and working within nature (not roping all of it off limits), as Wendell Berry professes. In Illinois, there is a family-owned and run company called Horigan Urban Forest Products that dries and mills old-growth wood from trees felled in the Midwest's awesome spring tornado season, and summer and fall thunderstorms. There are many sources of wood like this all over the world, and sometimes they're more expensive, but old-growth wood is going to be.
TIP: If you like our table but want something that looks a little more polished, just expand the finishing step. Start by sanding carefully and thoroughly, then apply a pre-stain wood conditioner. This will highlight the wood's grain and prevent the stain from absorbing unevenly. Apply your chosen finish in thin coats, carefully sanding out each coat and removing the sanding dust with a tack cloth before applying the next one. Finish the table with a coat of wax. There, now it's shiny.
Wood screws often have a coarse pitch, unthreaded shank (the bit between the head and the tip), and flat heads. The coarse pitch helps the wood screw tap into the wood and make a solid connection. The unthreaded shank is used so that the head can go flush with the wood beneath it without the threads getting in the way. Flat heads are typically used so that the screw can sit flush against the wood. Most wood screws also require a pilot hole, which you should drill with a drill bit prior to screwing the screw into the wood, find a chart on what size hole to drill for what screw here.

Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles. 

I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
Just look at this small and cute helicopter that is made of wood. I am sure you would enjoy having it. Your kids would play with this. If you are giving gifts to your friend on the birthday of his/her child, then it is the best gift. I am sure your friend would admire this gift and their kids would just love having it. There are different colors of this helicopter. I am sharing some of the pictures of this helicopter. Have a look at these pictures and get an idea about it.

Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8’s. Everything else was kept the same as Ana’s plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
I recently met  a man  known among local woodworkers for having a large workshop with a lot of tools. He offered to show me his workshop, and  take photographs of it. His workshop covers the entire basement of a large 1800 square foot bungalow. It's difficult to capture this workshop in just a few photos, so I figured I'd include a large number of photos.
While metal machinists’ straightedges are ideal for setting up woodworking machinery, their high-tolerance accuracy and weight are overkill for most woodworking tasks. For centuries, shop-made wooden straightedges handled many layout and testing chores, and the tools are still useful today. Wooden straightedges are lightweight, simple to make in any size and can be easily trued with common workshop tools. While straightedges that resemble the machinists’ versions – essentially a skinny rectangle with parallel edges – are useful, these tend to go out of square quickly as the seasons change. However, by understanding a bit about the way wood works, you can make a wooden straightedge that is both accurate and durable.
This is really easy and simple project. The person who is entry level in wood working can easily do this by following some steps. You can use this as a decoration piece in your home.The main thing is that you need a full command for using wooden tools and machine.It depends on your taste that what style you are presenting in making alphabets. Visit this link if you want to make this project by yourself. In this link you can see how to make alphabet signs.
Build your own platform bed frame at your home by following the source linked tutorial given above. The source link also includes more pictures that can help you to build a better bed frame. You can see a step by step set of instructions and guidelines to follow with real life pictures, as well as you can download a PDF file detailing the list of materials and tools you’ll need, know about the length of every board, and most importantly color-coded illustrations of the building process.
I think this is one of the best feelings if you are successful in making wooden spoon by yourself without any trouble. You can create stylish and unique spoon at home. The only thing is that you just need to follow some steps for making a perfect spoon. In this video, you can see how simply the making of a spoon is and how much you need time for making is explained in this video.
To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
×