I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color.


If you are searching any gift for your loved one this decoration piece is the ideal one. You can decorate it on the wall and with its good look your lounge would look great. If you are giving a gift to your family members they would surely admire you and like this gift very much. This running deer is creating an outstanding impression on the people and they tend to have it on the wall of their lounge. It would fit best in the lobby too. I am sharing some of the pictures of this dear; just have a look at these pictures.
In regards to your breadboard ends: You might be able to get away with what you did depending on how dramatic the humidity difference between seasons is in your area, but in the future, you might want to elongate your dowel holes in the tongue of the joint - all but the center hole. Specifically, you want to put a pin in the center of the table end (no hole elongation) and then elongate the holes on either side - maybe 1/16" to each side of center (it's OK to glue the center like you did). This allows the center pin to keep the board centered (duh) and then allows the table top to grow and shrink across it's width without putting undue stress on the breadboard ends. This is important because wood expands/contracts across it's grain significantly more than it does along it's length, so when you have a joint where end grain meets side grain (as in your breadboard ends) NOT taking this into account can mean that your project disassembles itself - or at least becomes "rickety" as the expansion/contraction cycle loosens the joint. The amount of growth you can expect is determined by wood species, initial moisture content of the wood, and humidity change across seasons. There are online references you can check to see how much you would want to elongate those holes.
Learning from the ideas of other woodworkers, while avoiding their mistakes is an excellent way to design and set-up your own shop layout. Setting up a woodworking shop as a hobby place, or for a some one more serious, who even may venture off into some sort of woodworking business; is not as easy as it might sound. Knowing the correct steps to follow will save you time and money, but it will also save you a lot of stress down the road.
Hand saws are a good option for making quick cuts that don’t need to be perfectly straight. They do take some muscle as they are non-powered, but are perfect for a quick job. The downside to hand-saws is you will need a different saw for each type of material you need to cut, so if you’re trying to cut wood and sheet metal, that’s an additional cost. 

Finally, a word on glues: You might want to do some experimenting with polyurethane glue instead of aliphatic resin (wood) glue. Polyurethane glues require a slightly different work flow, but since switching to polyurethane about 15 years ago, I can't see going back. I use aliphatic glues for some things (like biscuit joints) - but not very often. Polyurethane glues actually harden (aliphatic resins remain "liquid"), poly takes stain like wood (no bright areas where the stain wouldn't bond to the glue lines), poly doesn't dull tools or gum up sandpaper, poly is waterproof and can fill minor gaps. My favorite brand, so far, is Gorilla Glue. 

can you please tell me what type of wood you used? For the base and top? We bought a beautiful farm table from a table builder in no and had to finally ask that they take the entire table back bc the table was literally falling apart after two months! We now plan to build our own! The table we purchased was mad from Douglas fir! The entire top warped within a month and got a new top but then the entire top came loose from the base! They agreed to pick it up and refund our money. Should we use kiln dried boards for the top? We are so confused! In all plans we found online did they say what type of wood was used. Please help! Thanks so much!
Liz, Great job on your new table and benches. They really look great. Love the chandelier also. Wanted to let you know that after I saw your tutorial on the board and batten in your living room and dining room, it really inspired me. I said to myself, “I can do that.” So, with that in mind, I am just finishing up board and batten in my laundry room. It was really an easy project and I love the results. It really perks up a drab old laundry room. I ended up doing all the work myself. The only help I asked my husband for, was with the nail gun, as we had to really get into some tight places. All in all, though, I am very pleased with it. Thanks for the idea. 

All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
If you like a large octagon table instead of a simple round table, you can consider this free DIY plan from Ana White. This table features truss supports and pedestal base which makes it extremely durable and stable. The look might unnerve you because of the angle cuts, but you can easily get this task accomplished with the right tools. The entire list of the tools and materials required are provided. Also, the instructions are very easy to follow with illustrations included. The table has the capacity for seating six people, and it can be manufactured with a budget of around $110.
I recently met  a man  known among local woodworkers for having a large workshop with a lot of tools. He offered to show me his workshop, and  take photographs of it. His workshop covers the entire basement of a large 1800 square foot bungalow. It's difficult to capture this workshop in just a few photos, so I figured I'd include a large number of photos.

Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
I wanted to make more elegant jewelry tree that’s the reason I search on YouTube for a different tutorial of the jewelry hanging tree. If you are facing trouble in making jewelry hanging tree from the wood you need to try first simple one. In this link, you can see how you make this tree? And what kind of jewelry you can hang on this tree. Must watch this link so you can try easy one
We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.

Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8's. Everything else was kept the same as Ana's plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.


Have you ever heard about a chess which is made of wood? If not, then I am presenting a chess which is the most beneficial and attractive one. I am sharing its picture with you and you can make this chess very easily. The most amazing thing is that you can present it as a gift to other fellows. They would surely admire your gift. I am sharing some pictures of this chess; just have a look at these pictures. I am sure you would like these pictures.
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
There are also project books that provide fun new ideas to play with on the scrollsaw, and the fun is made even better when you’re being productive by making gifts at the same time. If you’re a carver, there are many project ideas available to you, as well. There are also Christmas projects for the woodturner. One popular idea is to make ornaments for your tree—or someone else’s. There are several books that will provide help specifically for making ornaments. You’ll find that woodturning allows an opportunity for endless creativity! You can find a variety of kits available, and then you can use whatever material you prefer to turn and then shape and finish any ornament you can imagine!

All of our tables are available in the color and finish of your choice.  Our existing color pallet includes 90 paint colors,  multiple stain color options in each workshop collection and several wax color options for our reclaimed woods.  Please feel free to explore all of our paint and stain options to help guide your design plans.  All of paint and stain finishes include a durable water based clear top coat.  This makes it easier to keep the table top clean with a damp sponge (no chemicals!) and provides protection from water rings. (How to Clean a Wooden Dining Table) 

With a little wood glue and imagination, painted 2”x2” wood pieces are topped with wooden balls and then dressed with fabric and a twig shepherd’s hook. A smaller wood block, peg, and fabric make the manger in this craft from The 36th Avenue. Place inside a paper-lined crate graced with a craft paper star, and the true meaning of Christmas will quickly come to life.

Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.

Actually, you're going to have the opposite problem because you'll meet people who DO cheap out on tools and find they don't work all that well, wear down quickly, and don't last that long. You will want the best of best but not be able to afford them all the time. You will find, more often than not, that some very good tools are available in the mid-priced ranges: not the least expensive but not the most, either. For example, these two sets of chisels are not terribly expensive but well made and a great quality for the price: Marples and the beginner's set I got from Woodcraft that's Made in the USA. You can ask for the nicer ones for Christmas when people ask for ideas. It's good to think of tools as things that you buy once, where possible, but there are some deals to be had.


This video shows the making of wooden hanging with one of the easiest ways. I make this wooden stylish wooden hanging at home easily and decorate with the variety things that give fabulous look to my room. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps. It is actually very easy and interesting to make. Size, shape and design is according to your choice when you made it.

Woodworking is one of those activities that stimulates your creativity and gives you self confidence. As any other hobby, you should start with basic projects so you get accustomed with the skills and then move to more challenging projects. If you have a stressful life or you are just looking for an activity to help you bond with your family or friends, doing DIY projects is the ideal choice.
Just look at this small and cute helicopter that is made of wood. I am sure you would enjoy having it. Your kids would play with this. If you are giving gifts to your friend on the birthday of his/her child, then it is the best gift. I am sure your friend would admire this gift and their kids would just love having it. There are different colors of this helicopter. I am sharing some of the pictures of this helicopter. Have a look at these pictures and get an idea about it.
I wanted to make more elegant jewelry tree that’s the reason I search on YouTube for a different tutorial of the jewelry hanging tree. If you are facing trouble in making jewelry hanging tree from the wood you need to try first simple one. In this link, you can see how you make this tree? And what kind of jewelry you can hang on this tree. Must watch this link so you can try easy one
Just check out this enticing and legant mirror that portray woodworking art finely blended with creativity. You can have it on the wall, especially in the lobby it looks great. It enhances the looks of your dinning room and your drawing room. I just found this over the interent and people are highly admired by this design. So, lets have a look at its image, you will get guidance on making it.

Now you have the knowledge of creating your dream farmhouse table of your choice. With 53 DIY Farmhouse Table Plans, consider choosing anyone which you like. Even if you are not an expert at carpentry, you can select from the simple designs that are equally stylish. If you are great at woodworking, you can consider the projects which require some expertise.
All of our tables are available in the color and finish of your choice.  Our existing color pallet includes 90 paint colors,  multiple stain color options in each workshop collection and several wax color options for our reclaimed woods.  Please feel free to explore all of our paint and stain options to help guide your design plans.  All of paint and stain finishes include a durable water based clear top coat.  This makes it easier to keep the table top clean with a damp sponge (no chemicals!) and provides protection from water rings. (How to Clean a Wooden Dining Table) 
Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8's. Everything else was kept the same as Ana's plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
10. Drip cyanoacrylate (CA) glue into the ball while holding the cap in place.This will firmly anchor the ball to the cap. To attach the hanging wire (see Sources, below), place a drop of glue on top of the hole and push in the wire. Apply glue to the icicle’s tenon and place it in the bottom hole. Slow setting CA glue works best for oily exotic woods such as rosewood and ebony.
So, now that that is clear, determine the total length and width you want your table, the amount of overhang you want, and the thickness of your legs.  In this case, the table would be 96″ long and 42″ wide.  I wanted 1 1/2″ overhang on all sides (this will actually be 1 1/2″ off each LEG), and the legs are 5″ wide.  So, my two long aprons should be 96″-3″ (which is 2x the overhang)-10″ (which is 2x the leg width)=83″ long.  Cut two 2x6s this length.
Modifications: The only modifications I made to Ana's plans were to the overall size. I used an additional 2×10 to increase the width of the table. I cut the table top boards a little longer and enlarged the width of the table base. I show the table top modifications in drawings below. Feel free to modify your table from the plans to best suit your needs.
Through this project, you can convey a message for your love ones. You can make a whole name, a message or anything which you like most for conveying a message. You can make any kind of alphabet or numbers by using wood.All of you need a full command of handling woodworking project. You can give this frame to your love ones as a special gift for any occasion and the person who receives this will like itdefiantly. Basically, this concept is the mixture of art and creativity from wood. The creative mind can easily reach at the top level of woodworking project through a better way. You can see the full size of this image by following this link.
I am sure you would like these table mats; these are made of wood and are perfect for gifts. In the evening you can keep the coffee mugs on these mats and the plates. These table mats look like in a puzzle shape. On your dining table such tablemats would look great and enhance the worth of your table. Your guests would surely admire them. Secondly, you can keep these table mats on your study table while studying. Your dining table would secure from stains by using these table mats. Let’s start this project without any hesitation, and keep your dining table secure from stains.

Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes.
For the legs, we purchased black steel gas pipes which had to be measured and cut to size.  After the steel pipes were cut they had to be manually threaded with a pipe threader.  Gas fittings were used to connect the piping. This step resulted in a few choice bad words, it seems you can actually get them already threaded. But why should we take the easy route, when we can make ourselves crazy instead.
Getting started in woodworking can seem like a daunting task. From specialty woodworking tools to identifying and understanding the different types of wood, there is so much to know that even the old-timers are still developing. But learning and experimenting are what woodworking is all about. Get started on the right foot with some essential basics about safety, tools, lumber, and traditional layout and measuring techniques.
Have you ever seen wooden slippers? These are the slippers which you can gift someone and they are very comfortable. You can make them very easily. While giving the gift you always want something unique. These are the unique slippers and you can wear these slippers in your home too. You can use them as a decoration piece and while going into the lawn you can have them. Have a look at the pictures which I am sharing with you, I hope you would like these pictures.
A track saw will allow you to make many cuts that would otherwise require a table saw, and is hard to beat if you need to cut up whole sheets of plywood. But for the price of a track saw, you can buy a table saw, and table saws are so much more versatile and convenient. So if you are just starting out, don't let anybody tell you that you don't need a table saw if you have a track saw. Save the track saw purchase for later.

In my design, I considered 3 different types of legs made from 30" long cedar 4x4s.  (You could use other types of wood including gluing three 2x4s together to make solid legs.)  The simplest design was to cut the legs to length and use the 4x4s square.  Second was to taper the two inside surfaces and third was to taper all four surfaces.  I ended up tapering all 4 sides on my bandsaw.  The cut line begins 4" from the top and removes 1/2" at the bottom.  Pic 2 shows how little I removed.  I wanted the legs to have "shape" while remaining stout in appearance and this slight taper seemed about right.  Pic 2 also shows the levelers in the bottom of these legs which were salvaged from a previous project.  I decided to leave the levelers and shortened the legs a bit.
To inset the aprons 3/4" from the outer surface of the legs I made a spacer from 2 pieces of plywood.  This little jig made it easy to keep the distances uniform and also secure the apron to the leg while fastening.  Pic 3 illustrates how the jig, apron and leg are clamped together for fastening.  Each apron end is held by three 2 1/2" pocket screws.  The pocket holes were made using a Kreg pocket hole jig.  I assembled the short ends first and then the rest of the table base making sure the kerf (for clips) was along the top edge.  Since this is a long table I also added a cross piece in the middle of the table using pocket screws.
×