Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.


There is no cost to use the database. Registering is not required. You should be able to browse the database and click through the links. Having said that, considering the fact there are so many browsers out there being used, this site's software might not allow some visitors to browse, it all depends on the Internet traffic, and your browser's compatibility.
Disclaimer: Almost any DIY project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Rogue Engineer has made every effort to be complete and accurate in the instructions provided on this website. Rogue Engineer will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer's operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.
Building a wine rack is usually a very common beginner's woodworking plan. Creating a wine rack is an easy plan that can most of the time be completed in a day or half, depending on how large and detailed you would like it to be. And the better news is that this free wine rack plan will let you build you a great looking wine rack for much less than it would cost.
There was a time when working with woodworking was considered a waste of time. That trend has subsided with contemporary interior designing commanding a stiff price. If you have the right skills then you can surely make a career out of your skills but as they say "nothing comes easy". Woodworking is no different. If you don't have the skill, yet, start with these beginning projects.
These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden toy house. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing, but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden house.

Often when working with wood, after cutting it up and drilling holes the surface will be unfinished with unsightly burs and splinters. This is a simple fix with a quick sanding, but with a seemingly endless amount of types and grits of sandpaper and sanding equipment this can get confusing. The main types of sanders we’ll cover are belt sanders, orbit sanders, and hand sanders.
Building a wine rack is usually a very common beginner's woodworking plan. Creating a wine rack is an easy plan that can most of the time be completed in a day or half, depending on how large and detailed you would like it to be. And the better news is that this free wine rack plan will let you build you a great looking wine rack for much less than it would cost.
In episode 10 of our series, Getting Started in Woodworking, we complete our first season with a demonstration on how to apply an oil-and-wax wood finish. This finishing recipe is extremely simple and very effective. It will work for about 95 percent of the projects most woodworkers build; the only exceptions are surfaces that need to take a lot of abuse, such as a dining table tabletop.
Because these legs were salvaged they had old screw holes in them which were filled prior to painting.  In retrospect, it probably would have looked cool to just leave them.  I lightly sanded the legs with 100 & 150 grit sandpaper which smoothed them without removing all the saw marks.  One coat of chalk paint and 2 coats of clear Briwax was used to finish the legs.  Briwax yellows the finish a bit which aged the paint nicely.  Between coats of Briwax I sanded through the paint on some of the edges with 100 grit paper to show wear.  

Hardwood boards and softwoods may look similar in shape and dimension, but they are sold using completely different measuring systems. Softwoods are typically sold in standard lumber dimensions (such as a 2x4), whereas hardwoods are most often sold by the board foot. Calculating board feet helps you guarantee that you're getting your money's worth on every piece of hardwood you purchase.
The most useful stationary tools are a drill press and a table saw. For the longest time, I only had a cheap old contractor saw, and only a very small drill press, but I made do with those. The difference between a good drill press and a cheap drill press is much smaller than the difference between a cheap drill press and no drill press, so don't wait until you can afford the perfect one.

Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Build your own platform bed frame at your home by following the source linked tutorial given above. The source link also includes more pictures that can help you to build a better bed frame. You can see a step by step set of instructions and guidelines to follow with real life pictures, as well as you can download a PDF file detailing the list of materials and tools you’ll need, know about the length of every board, and most importantly color-coded illustrations of the building process.
Two children who visit me several times each summer are very fond of trains, both riding on them and playing with them, so I came up with this design. It is not meant to be an authentic model in any way. It is just for the children to play with. The engine and cars feature dovetail joinery details. When someone mentions the words “dovetail joint,” my mind automatically conjures up boxes. A dovetail jig is one of the best ways to make dovetail joint boxes, but a dovetail jig can actually be used to join any two pieces of material together at right angles. This may well be on a box, but it could also be a drawer or, as in this case, parts for a toy train.
The blade on a block plane, (click to enlarge drawing) commonly referred to as a plane iron, is mounted with the bevel side up to produce a cutting angle of about 37 degrees in a standard plane and 25 degrees in a low-angle plane. Some block planes feature an adjustable mouth, which allows the plane to be tuned for different cuts; Close the mouth and lower the blade for finish cuts or open the mouth and extend the blade for thicker rough cuts.

A 1914 book which treats, in a most practical and fascinating manner all subjects pertaining to the "King of Trades"; showing the care and use of tools; drawing; designing; and the laying out of work. The principles involved in the building of various kinds of structures, and the rudiments of architecture. It contains over two hundred and fifty illustrations made especially for this work, and includes also a complete glossary of the technical terms used in the art. The most comprehensive volume on this subject ever published for boys.
Personally identifying information is information that can be used to identify who you are such as: name, mailing address, email address. To enter certain areas of the site, you will be required to register and provide information about yourself. This information is for the purposes of Canadian Woodworking and helps us to tailor the site to best meet the needs of our audience. 
Not every woodworking shop have sawhorses, but you'll find them a useful and versatile item to have at hand. A sawhorse can be used as a short-term table, workbench or benchtop stand, and can be use as a workbench extender or to as a temporary lumber self. Build your own sawhorses allows you to customize them to your own needs and wood shop requirements.
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day! 

You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂
To be honest I'm not entirely sure of all the wood species because it was repurposed wood. The legs were from cedar 4x4 cutoffs and the aprons were from barn wood which I think was poplar. The top is from wood I helped salvage about 40 years ago as a kid and I'm not sure what type it is. It could be fir. I think the most important thing is to use wood that is dry and straight. Kiln dried is good. If I was going to Home Depot I'd buy pine for the legs and aprons and poplar for the top if planning to paint it. Poplar is much harder and therefore more durable than pine, however, a pine top would work too. Pine is cheaper than poplar. Douglas fir is also softer than poplar if you anticipate a lot of wear and tear. Pine and poplar are more difficult to stain evenly, but you could leave it natural and use a polyurethane to protect it.
I can't really make good recommendations as to what specific brands of tools are better than others. Most of my tools were opportunistic purchases, with relatively little regard to specific brands. More often than not, it's price and a quick inspection to gauge the solidity of the tool that are the determining factors. My tools are usually not among the best that can be had, but good enough.
You can easily make these wooden hangings by taking equal size wooden pieces of different shapes. You must know you should have a bit of woodwork skills to do this creative and interesting work. All you need are a few pieces of wooden planks, a saw, screws and plates. I make this wooden hanging at home easily and decorate with different kind of paints especially seasonal flowers that give amazing look to the wall. You can also do easily. This DIY project is fun and good activity of the same time.
In my project section I wrote an article about small boxes made with a router. The article was written years ago and the boxes were made several years before that. Thus, I had to use one of those old boxes to write this article as I couldn't exactly remember how I made them. The initial construction process came from that great Canadian TV show, The Router Workshop, but the jig I use was born of necessity. One year I decided to build a pile of these boxes and enter a craft fair. After two or three, I decided there had to be a faster way to set up for the cuts, so I used a discarded table saw sled to fashion the jig in this article.
Hybrid saws are essentially built like the old contractor saws, but with the motor in the cabinet, just like a cabinetmaker saw. They are much cheaper than cabinetmakers saws and not as heavy. The saw at left is my first table saw, a 40-year old contractor saw, which I enclosed on the bottom to keep the sawdust inside. At present, I use a hybrid table saw
Scrollsaws are good for projects like cutting puzzles or silhouettes of cutesey animals out of wood. But for making furniture, scrollsaws just aren't up to the task. Scrollsaws, along with Dremel tools, do have their uses in crafts, but for woodworking, they are just a little too small. That said, Dremel tools are very useful for sharpening brad point drill bits, forstner bits, and bandsaw blades, so they do have a use in woodworking.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
To inset the aprons 3/4" from the outer surface of the legs I made a spacer from 2 pieces of plywood.  This little jig made it easy to keep the distances uniform and also secure the apron to the leg while fastening.  Pic 3 illustrates how the jig, apron and leg are clamped together for fastening.  Each apron end is held by three 2 1/2" pocket screws.  The pocket holes were made using a Kreg pocket hole jig.  I assembled the short ends first and then the rest of the table base making sure the kerf (for clips) was along the top edge.  Since this is a long table I also added a cross piece in the middle of the table using pocket screws.
×