It's nice to be on your site getting plans and building projects.  I was so inspired by you I went out and bought Ryobi tools, and have since built 3 projects all on http://www.Ana-White.com/ by you.  I loved building the Potting Table, and better yet my Mother loved it when I gave it to her as a gift.  I am now working on the Farm House style Table and Benches.  I can't wait to see how they turn out!  
For the legs, we purchased black steel gas pipes which had to be measured and cut to size.  After the steel pipes were cut they had to be manually threaded with a pipe threader.  Gas fittings were used to connect the piping. This step resulted in a few choice bad words, it seems you can actually get them already threaded. But why should we take the easy route, when we can make ourselves crazy instead.
If you have a small space in your kitchen or living space but require a table for dining or if you are fascinated with roundtable designs, you can consider this free DIY plan form Lane Home Co. to be a great option. Not only this table looks nice but also it is very sturdy with layered centered cross base in a V-shape. You might feel the table is difficult to make, but if you have the right tools and carefully follow the instructions, you will be able to accomplish the task easily.
Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.

Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
If you like a large octagon table instead of a simple round table, you can consider this free DIY plan from Ana White. This table features truss supports and pedestal base which makes it extremely durable and stable. The look might unnerve you because of the angle cuts, but you can easily get this task accomplished with the right tools. The entire list of the tools and materials required are provided. Also, the instructions are very easy to follow with illustrations included. The table has the capacity for seating six people, and it can be manufactured with a budget of around $110.
In the grand scheme of history, power woodworking tools are a very recent innovation. However, it is hard to imagine modern woodworking without the use of power tools. That being said, one doesn't need a shop full of expensive woodworking machines to be an effective woodworker. When building a workshop, there are seven power tools to focus on first:
Each issue of Wood News , our online woodworking magazine, features a different home workshop, and we've compiled 10 of these features here. Browsing them is a great way to find new ideas on how to set up your own shop, or if you just want to see innovative ways other woodworkers have approached the various shop setup issues we all face. From space considerations and smart storage ideas to the various tool combinations and approaches to woodworking, you'll find something here that's really interesting. Click each image to take a look!

Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
Whatever type of sander you use, you’ll be using sandpaper. Most sandpaper is aluminum-oxide and comes in different grits. The grit is a measure how fine it is and will determine what you’re using it for. Grits typically range from about 20 to 1000, 20 being extremely course and 1000 being extremely fine. When sanding, if you have a lot of material to remove and really need to smooth things out, a low or course grit will be best. Once you’ve sanded with the coarse grit move to a finer grit, typically up around 200 for finishing.
I few years ago I made a build plan for Remodelaholic for a super adorable House Frame Bed. The build plan was inspired by this darling room shared by an Australian magazine, Home Life.  Over the years a few requests have been made for a full size mattress version. Here it is --> How to Build a House Frame Bed - Full Size This bed is designed to fit a full mattress 53" x … [Read more...]

​The plan tutorial includes images, diagrams, step-by-step instructions, and even a video to help you along the way. You can also go with some more bookcase design ideas. Browse the internet for more and we are also proving a link below to some more ideas to this plan. Select and build one of these free bookcase DIYs and you will have everything available easily that you need to get started creating a bookshelf for any room in your house.
After the second coat, I let the table dry completely. Then, I took a 400 grit sanding blog and quickly sanded the top surface and legs. This smooths out any bumps or dust that may have dried in the finish. After sanding, take a damp rag to clean off the sawdust. Lastly, use a clean rag and wipe a very thin 3rd coat on all of the parts you sanded. This will give the table a final shine. Let the table dry and air out for awhile.
Jigsaws have a reciprocating blade, and are a great do-it-all saw which we use them quite often on our projects. They excel at making oddly shaped cuts and curves, but aren’t so great if you need perfectly straight cuts. Another advantage to jigsaws is that the blades are small, cheap, and interchangeable so that you can quickly swap between cutting different materials.
If you want to buy this project, you can easily contact here. The person who is entry level in woodworking project can feel trouble for perfect making, but if you know the step by step procedure you will never face any kind of difficulties. In this link, you will find a different style of chair plus table and personally, I like this style of the project hope you will also like it.
This Welcome Farmhouse Sign post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. Farmhouse style wood signs are a fun way to personalize your space. They are fairly easy to make yourself … [Read more...]
This farmhouse table can actually be built with a budget of $65. It is one of the most beautiful furniture you can make which you are sure to love in your kitchen or living space and is extremely sturdy with all the supports. You can boast of this great design if you are celebrating parties with a lot of guests. Just follow the instructions carefully and tools required to make this table.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details on internet. Follow the steps properly to make a nice and strong wall wooden hanging. This wooden piece makes wooden clips to hold decorative items. The tutorial explains the procedure for building this beautiful wall hanging. Make sure to use only high quality items for any woodworking project.
About the video, your opening photo showed a leg pedestal so I though your first "mistake" would be about the built-in stress points inherent in that particular design. The timbers are quite robust so it is probably not an issue for everyday use, however the side stresses pressing down on the table's front and rear edges would be concentrated angularly at the center mortise and tenon location on the vertical posts. This could lead to cracks developing at those locations in time, depending on the loads placed on the table. I suggest a back-to-back "capital letter K" design for future tables that would distribute the loads more evenly across the timbers and avoid stress cracks.
Bandsaws are very handy. They cut cleaner than jigsaws, but perhaps one of the biggest advantages of a bandsaw is convenience. It's my tool of choice for making most quick rough cuts. I also use it for cutting up long scraps to short pieces to fit them in the scrap box. I actually bought my bandsaw before I bought a table saw - I saw one marked down at a woodworking show, and I knew I'd get one eventually, so I jumped on it. That was before I built a bandsaw
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
10. Drip cyanoacrylate (CA) glue into the ball while holding the cap in place.This will firmly anchor the ball to the cap. To attach the hanging wire (see Sources, below), place a drop of glue on top of the hole and push in the wire. Apply glue to the icicle’s tenon and place it in the bottom hole. Slow setting CA glue works best for oily exotic woods such as rosewood and ebony.
The free woodworking plans are sometimes very straightforward and easy, and sometimes only for someone with a high level of woodworking artistry. When you find something you'd like to build, print out the free project and instructions while they are still available. Make a point of checking the material lists before buying your building materials for accuracy.
This wood bench plan is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. My neighbor saw a cute wood bench at a local restaurant and wanted one for her house.  She snapped a few pics for me, … [Read more...]
In regards to your breadboard ends: You might be able to get away with what you did depending on how dramatic the humidity difference between seasons is in your area, but in the future, you might want to elongate your dowel holes in the tongue of the joint - all but the center hole. Specifically, you want to put a pin in the center of the table end (no hole elongation) and then elongate the holes on either side - maybe 1/16" to each side of center (it's OK to glue the center like you did). This allows the center pin to keep the board centered (duh) and then allows the table top to grow and shrink across it's width without putting undue stress on the breadboard ends. This is important because wood expands/contracts across it's grain significantly more than it does along it's length, so when you have a joint where end grain meets side grain (as in your breadboard ends) NOT taking this into account can mean that your project disassembles itself - or at least becomes "rickety" as the expansion/contraction cycle loosens the joint. The amount of growth you can expect is determined by wood species, initial moisture content of the wood, and humidity change across seasons. There are online references you can check to see how much you would want to elongate those holes.
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
Because these legs were salvaged they had old screw holes in them which were filled prior to painting.  In retrospect, it probably would have looked cool to just leave them.  I lightly sanded the legs with 100 & 150 grit sandpaper which smoothed them without removing all the saw marks.  One coat of chalk paint and 2 coats of clear Briwax was used to finish the legs.  Briwax yellows the finish a bit which aged the paint nicely.  Between coats of Briwax I sanded through the paint on some of the edges with 100 grit paper to show wear.  
This tutorial shows the making of stylish wooden wall hangings which is one of the easiest ways by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps. You can also make by cutting, assembling, add mesh and plastic, then attach to boundary and fill with your favorite light to flowers.
Doing fine. I don't expect the pocket screws to fail or loosen over a typical period of time. They make a very solid joint especially if you also glue the joint. Compared to mortise and tenon a pocket screw will fail sooner under severe stress, however they are easier to repair than M&T which blow out. So I expect long use from this table unless a bunch of heavy people start dancing on it and the old wood will probably break first.
You’ll need to buy 4×4, 2×10, and 2×4 boards for this project. These boards can be found at your local lumber yard. Take your time to find quality boards that are straight and have little warp. First, I built the table top out of 2x10s. I used 5 2×10’s for the main part of the table and a 2×10 for each breadboard end. Ana’s plans call for four main boards, but I wanted a little larger area to spread out. I used a 12″ miter saw to make all of the cuts. I cut the 5 boards to 69 inches long.
As Chief Creative Officer and Founding Partner at Brit + Co, Anjelika Temple brings her voracious consumption of all things creative and colorful to DIY projects, geeky gadgetry finds and more. When she's not DIY-ing her heart out, you'll find her throwing dinner parties with friends or adventuring with her husband David, their daughter Anokhi, and their silly dog Turkey.
Hi Nancy! I only looked specifically for rectangular tables – sorry!! I do know the blog Little Red Brick House made a round farmhouse table but I couldn’t find instructions for it. Maybe reach out to her and she could give you more details? Here’s the link to her post: http://littleredbrickhouse.com/industrial-farmhouse-dining-room-makeover-one-room-challenge-reveal/ Thanks for stopping by!
I recently met  a man  known among local woodworkers for having a large workshop with a lot of tools. He offered to show me his workshop, and  take photographs of it. His workshop covers the entire basement of a large 1800 square foot bungalow. It's difficult to capture this workshop in just a few photos, so I figured I'd include a large number of photos.
Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8’s. Everything else was kept the same as Ana’s plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
In my design, I considered 3 different types of legs made from 30" long cedar 4x4s.  (You could use other types of wood including gluing three 2x4s together to make solid legs.)  The simplest design was to cut the legs to length and use the 4x4s square.  Second was to taper the two inside surfaces and third was to taper all four surfaces.  I ended up tapering all 4 sides on my bandsaw.  The cut line begins 4" from the top and removes 1/2" at the bottom.  Pic 2 shows how little I removed.  I wanted the legs to have "shape" while remaining stout in appearance and this slight taper seemed about right.  Pic 2 also shows the levelers in the bottom of these legs which were salvaged from a previous project.  I decided to leave the levelers and shortened the legs a bit.
8. Size a tenon on the cap piece to fit the ball’s hole. Undercut its shoulders, too. The cap piece, as shown here, is glued into a shallow hole turned into the face of a waste block. Shape the cap, then part it off the waste block. To clean up the tip, reverse the cap and push the tenon into a new hole in the waste block. Finish the cap on the lathe, then remove it and drill a small, shallow hole for the hanging wire.
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
Use: White vinegar poured into a glass jar with steel wool that you have pulled apart and loosened. After fifteen minutes, brush onto the wood. After the surface is dry, you can leave it as-is or clear coat it with a product like Minwax One Coat Polyurethane. Distress prior to finishing, if so desired.http://www.wikihow.com/Age-Wood-With-Vinegar-and-Steel-Wool
Hardware stores are full of big compound sliding miter saws. But before you buy one, ask yourself, how often do you need to cut miters on stock wider than a non sliding miter saw can handle? For the few times you have to do that, it's probably better to use a circular saw. The complicated mechanism of a compound sliding miter saw makes them bulky and less rigid. Which means an expensive compound miter saw may not make as clean a cut as you can with a table saw sled.
A track saw will allow you to make many cuts that would otherwise require a table saw, and is hard to beat if you need to cut up whole sheets of plywood. But for the price of a track saw, you can buy a table saw, and table saws are so much more versatile and convenient. So if you are just starting out, don't let anybody tell you that you don't need a table saw if you have a track saw. Save the track saw purchase for later.
The shop you see in the layout is my current setup and has evolved over many years to accommodate most importantly the acquisition of newer equipment but also better work flow. It is a free standing two story traditional barn style with office and storage space on the second level. Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools.
Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes.

10. Drip cyanoacrylate (CA) glue into the ball while holding the cap in place.This will firmly anchor the ball to the cap. To attach the hanging wire (see Sources, below), place a drop of glue on top of the hole and push in the wire. Apply glue to the icicle’s tenon and place it in the bottom hole. Slow setting CA glue works best for oily exotic woods such as rosewood and ebony.
I think you can see from all of these choices, the best solution is the one that works for YOU and your home. Just make sure you create an environment that makes you feel creative and excited to work. And while there are amazing workshops online for inspiration, don’t go crazy thinking your work area needs to be a renovation in and of itself! Use bits and pieces of inspiration, then get going on your projects!

I few years ago I made a build plan for Remodelaholic for a super adorable House Frame Bed. The build plan was inspired by this darling room shared by an Australian magazine, Home Life.  Over the years a few requests have been made for a full size mattress version. Here it is --> How to Build a House Frame Bed - Full Size This bed is designed to fit a full mattress 53" x … [Read more...] 

There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are twenty woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.
As Chief Creative Officer and Founding Partner at Brit + Co, Anjelika Temple brings her voracious consumption of all things creative and colorful to DIY projects, geeky gadgetry finds and more. When she's not DIY-ing her heart out, you'll find her throwing dinner parties with friends or adventuring with her husband David, their daughter Anokhi, and their silly dog Turkey.
While the best look of modern homestead table has been around for a short time, another harvest of farmhouse style feasting tables has been showing up of late. They are an incredible approach to join and investigate a generally present day room. The long pieces of crude wood are emotional without being overwhelming. Many combine press with recovered wood for a modern curve that is tough without being to massive.
You can create a simple and affordable eye catching frame for your artwork out of a great old wooden ladder. Simply turning the ladder on its side will allow you to display quite a lot of art in a row for so little money. This simple home decor craft project is an affordable way to introduce color, the vintage look, and even some architectural interest without costing a fortune.
This project requires a fair amount of turning experience. If you’re patient, however, you’ll find that making this ornament is a good way to learn new techniques. Shaping a delicate spindles takes practice, but you can make up the shape of the icicle as you go. If you’ve never hollowed a vessel before, this ball is an easy first project—the inside doesn’t have to be smooth and polished. The ball is hollow to reduce its weight.
The table top was then sealed with multiple coats of Varathane for protection.   We chose not to add a stain to the top because its natural coloring is gorgeous already.  There are shades of browns and grays in the wood along with saw marks from the original milling, knots, and grooves that you would come to expect from a reclaimed barn wood table.
This rustic farmhouse table comes with an extension leaf making it extremely functional. When required, you can extend the two end pieces to add extension leaves for additional space on the table and when not in use, simply slide it in. It will cost you around $230-$300 based on the materials which you already have. Though it requires some carpentry skills to get the job done, you can also do it with attention to the detailed instructions provided if you are new to woodworking.
With a little woodworking knowledge and use of some basic items, you can build a wonderful tissue box holder of your own. You can easily build them in bulk and then sell at good rates. Although easy, a wooden tissue box is an equally important and useful item for households. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. These wooden items give a classy look to your interior furnishing. This is the easiest way to spice up your tables with beautiful wooden tissue boxes. By doing this you can give style to your table settings.
The tutorial illustrates all the necessary steps, but you still need to have some basic woodwork knowledge to be able to handle the task. Here is a link to the video tutorial to make the task easier for you.You can easily make these wooden boxes by joining equal size wooden pieces of square shapes. I make this wooden box at home easily and decorate with different kind of artificial seasonal flowers that give amazing look. You can also do easily.You can also make amazing pieces of wooden art easily at home.This is definitely one of the easiest woodworking projects for you.
Next, make your breadboard top out of four 2×8's and 1 2×10. Ana's plans call for all 2×10's, but I wanted to use 2×8's because they are easier to work with. I don't have a photo of the process, but if you go to the 11:18 mark on the video below you can see the process involved with attaching the top boards. You will need a Kreg Jig and 2.5″ Kreg screws for this process. Once the top is assembled, center it on the base and attach to the base from unnderneath. Use 4.5″ screws to connect the 4×4's to the top and 2 or 2.5″ screws to anchor the top to the 2×4 horizontal boards.
You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂
To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
Douglas fir from home improvement centers will almost always warp when you try to make a flat top. It is never dried to the same extent as hardwood and ships out for the purpose of being used as framing lumber, not furniture lumber. That said, you can do it, but buy it and let it sit in your garage for a few months or longer to let it further dry and acclimate to your environment. Even better if you plane it down after that waiting period, then allowing it to acclimate for another week or so to make it works out all of its twists prior to being turned into a top. Do you have any hardwood dealers in your area? Try visiting one and make an investment in your table...buy some good maple (soft maple is worlds harder than new douglas fir - you don't need hard maple, ie:or sugar/rock maple).
This may be my longest post to date. But also the largest project, and I have to admit that the work itself was done by my husband and I was merely his helper.  We decided to build a farm table using reclaimed barn wood from scratch. Our first stop was to an awesome secret spot, secret because I’ve been forbidden from sharing its location, to pick out the wood. It’s really no secret, its located in New Jersey. Go ahead and google, it’s easy to find *wink* This place had a huge selection of slabs, doors, and everything wood.  Most of the wood comes from salvaged barns in Ohio! 
Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8's. Everything else was kept the same as Ana's plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
I can't really make good recommendations as to what specific brands of tools are better than others. Most of my tools were opportunistic purchases, with relatively little regard to specific brands. More often than not, it's price and a quick inspection to gauge the solidity of the tool that are the determining factors. My tools are usually not among the best that can be had, but good enough.
Having swing in your own home, yard or garden can be so de-stressing and be relaxing a thing to enjoy, that doesn’t matter you have a big yard or patio, or vacant porch. Kids will surely fall in love with this swing porch and love playing on a breezy day. Even, adults also do relax and enjoy a quite morning coffee, or just being embraced by the sun in the swing.

When you are gathering inspiration for barn door Plan, be sure to note the cost of the tools used in the plan. Barn door tools can often cost more than your actual door! But, there are many clever and affordable do it yourself tools options in the tutorials mentioned below! Let us explore some DIY Barn Door Tutorials. Just click on the blue text below and check some amazing fun Barn doors. They might be different from the one shown in above picture.
If you need more inspiration for your next woodworking project, check out Ted's Woodworking Plans package. It has a massive collection of 16,000 projects with breathtaking step-by-step instructions, blueprints, photos and videos. We definitely got a lot of joy from creating some beautiful projects over the years and we hope you'll feel the same way.
×