The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
With a little woodworking knowledge and use of some basic items, you can build a wonderful tissue box holder of your own. You can easily build them in bulk and then sell at good rates. Although easy, a wooden tissue box is an equally important and useful item for households. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. These wooden items give a classy look to your interior furnishing. This is the easiest way to spice up your tables with beautiful wooden tissue boxes. By doing this you can give style to your table settings.
This woodshop photo is the outdoor Florida woodshop of Woodworking Guide Chris Baylor. This woodshop photo shows a portable miter saw stand, temporary shop table consisting of a pair of sawhorses with plywood as a table top, a contractor table saw and band saw on portable bases, and an Adirondack loveseat glider rocker that is a current woodworking project in progress.
Table aprons are the boards that make up the sides of the table base and connect the legs.  They are also called table skirts.  Dimensions are 3 1/2" wide and 22 1/4" long across the ends and 62" long down the sides.  For a 34x72 inch table and 4x4 legs, these apron lengths inset the legs roughly 2" on all sides.  The wood is 3/4" to 1" thick rough-cut wood from our old barn.  The red color was a little stark so I sparsely brushed a coat of chalk paint on and waxed again with Briwax.
Pegboard is the master of all workshop organizational tools. You can buy full sheets (4x8) at any big box store, but most also sell smaller, more manageable sheets. And while you can just slap these up on any wall, something like this fold-out wall cabinet will double your storage and keep your tools tucked safely away. You could also try this fancy sliding-door version.
Need a farm table for a nook?  A pedestal table table works great.  Looking to seat a lot of people?  A trestle table could be the right solution for you.  All of our base options come in a variety of design styles to fit your specific interior design requirements.  If you can’t find what you need, send as picture of what you have in mind and we may be able to design a base for you.  Not sure what base would work best for you?  Our table consultants are here to help!
As you hear the term “farmhouse table”, you think about a traditional table. Moreover, if you like the traditional style of your furniture, this is a perfect DIY plan from Popular Mechanics for your farmhouse table. The design is very basic, and you can easily make this table even if this is your first woodworking project. The detailed instructions with illustrations are provided along with the materials and tools required to accomplish the task. This table offers enough space for at least six people to sit comfortably and it will be one of the greatest additions to your dining space.
If you want to get into woodworking, a good project to tackle is building your own workbench. It's really not that hard. So if building your own workbench is a bit too much work, or too intimidating, then take a step back and examine whether you really want to get into woodworking. This may be different if your goal is to cut silhouettes of kittens out of plywood with a scrollsaw, but I wouldn't call that sort of activity "woodworking".
There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are twenty woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.

Next, make your breadboard top out of four 2×8's and 1 2×10. Ana's plans call for all 2×10's, but I wanted to use 2×8's because they are easier to work with. I don't have a photo of the process, but if you go to the 11:18 mark on the video below you can see the process involved with attaching the top boards. You will need a Kreg Jig and 2.5″ Kreg screws for this process. Once the top is assembled, center it on the base and attach to the base from unnderneath. Use 4.5″ screws to connect the 4×4's to the top and 2 or 2.5″ screws to anchor the top to the 2×4 horizontal boards.


Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
This is another basic farmhouse table design which you can easily build. However, the table is large with a seating capacity of at least ten people. This table is also a great addition to be in your home as it serves many purposes including storage apart from dining. The instructions are provided in two separate parts; first part includes the construction process and the second part includes the finishing touches.
There's no better way to give thanks than to gather family and friends around an enormous table to share a feast. A farmhouse table would be the perfect spot. You could make one out of construction lumber and ordinary hardware in a couple of days. We're not talking precision woodworking here. If you can handle a circular saw and a chisel, you can do this. Farmers used to build these tables themselves, not furniture makers or carpenters, so it's okay if it turns out a bit rustic. That's half the fun. The other half is sitting down to eat at a table you built yourself.
#00 Steel Wool and White Vinegar – Put a handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least a couple days. The mixture will get darker the longer you let it sit. Once diluted, simply paint the mixture on your piece. Oxidation will occur and the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all.

A good tool to get next is some sort of circular saw. A circular saw cuts a lot faster than a jigsaw, and it's easier to make a straighter cleaner cut with it. It's also a very useful tool for cutting up big sheets of plywood, even if you already have a table saw. At this point, you have enough tools for some simple projects such as this table or some storage shelving


The router might just be the most versatile woodworking power tool there is and it's a great first tool for beginner woodworkers. When set up properly and safely handled, a router can do everything from cutting joinery to shaping parts. Just be sure you understand the basic safety procedures and read the tool's manual if you're new to using a router.

Learning from the ideas of other woodworkers, while avoiding their mistakes is an excellent way to design and set-up your own shop layout. Setting up a woodworking shop as a hobby place, or for a some one more serious, who even may venture off into some sort of woodworking business; is not as easy as it might sound. Knowing the correct steps to follow will save you time and money, but it will also save you a lot of stress down the road.
This plan is probably the easiest plan ever added in the list. The one who is working on this project, don’t need any professional skills but just knowing some basics of woodworking will be enough for this DIY. You will get step by step detailed process of this tutorial in the source linked tutorial. This tutorial will surely help you to build this plan quickly.
×