If you`ve found the farmhouse table plans below interesting we invite you to check various other free woodworking plans, we have curated lists that will show you how to build a small cabin, greenhouse, porch swing, fire pit, garage, cat tower, a rocket stove, tiny house, duck house, deer stand, bat house, diy tree house, cat tower, porch swing, pole barn, rabbit hutch, diy dog bed, a playhouse, a chicken coop, a coffee table or a gazebo.
10. Drip cyanoacrylate (CA) glue into the ball while holding the cap in place.This will firmly anchor the ball to the cap. To attach the hanging wire (see Sources, below), place a drop of glue on top of the hole and push in the wire. Apply glue to the icicle’s tenon and place it in the bottom hole. Slow setting CA glue works best for oily exotic woods such as rosewood and ebony.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Drawing inspiration from a round trestle table that was worth $3350, Rogue Engineer came up with their free DIY plan to make the table cheaper. Unexpectedly, you can make this excellent table for around $40. You may think that round tables are difficult to build, but if you have the proper tools and follow the instructions carefully as provided, you can actually make this table with ease.

​The plan tutorial includes images, diagrams, step-by-step instructions, and even a video to help you along the way. You can also go with some more bookcase design ideas. Browse the internet for more and we are also proving a link below to some more ideas to this plan. Select and build one of these free bookcase DIYs and you will have everything available easily that you need to get started creating a bookshelf for any room in your house.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
In the grand scheme of history, power woodworking tools are a very recent innovation. However, it is hard to imagine modern woodworking without the use of power tools. That being said, one doesn't need a shop full of expensive woodworking machines to be an effective woodworker. When building a workshop, there are seven power tools to focus on first:
I recently came across this beautiful wooden hanging swing, which was made in the square shape. The very first look was enough for me to start loving it. Although I haven’t yet tried building one myself, I am definitely going to. You can also make one for elders and put it in your garden or terrace or anywhere in the house. Elders can use it to relax and the kids can use it to play or sleep. Although this is a really beautiful piece of woodwork, it is not that easy to make. Only someone with good woodworking skill can think of making this swing set.

Nothing could be easier to accomplish than these rustic, personalized wood slice tree ornaments. After slicing a log into discs, screw in an eye hook, and thread with some jute twine for a hanger. Decorate with paint or metallic markers, or try the clever ink-jet-printer transfer technique that Upcycled Treasures used for the ornaments shown here. One log will make gifts for your entire extended family.


A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
This woodshop photo is the outdoor Florida woodshop of Woodworking Guide Chris Baylor. This woodshop photo shows a portable miter saw stand, temporary shop table consisting of a pair of sawhorses with plywood as a table top, a contractor table saw and band saw on portable bases, and an Adirondack loveseat glider rocker that is a current woodworking project in progress.
Because these legs were salvaged they had old screw holes in them which were filled prior to painting.  In retrospect, it probably would have looked cool to just leave them.  I lightly sanded the legs with 100 & 150 grit sandpaper which smoothed them without removing all the saw marks.  One coat of chalk paint and 2 coats of clear Briwax was used to finish the legs.  Briwax yellows the finish a bit which aged the paint nicely.  Between coats of Briwax I sanded through the paint on some of the edges with 100 grit paper to show wear.  
If you have a small space in your kitchen or living space but require a table for dining or if you are fascinated with roundtable designs, you can consider this free DIY plan form Lane Home Co. to be a great option. Not only this table looks nice but also it is very sturdy with layered centered cross base in a V-shape. You might feel the table is difficult to make, but if you have the right tools and carefully follow the instructions, you will be able to accomplish the task easily.
You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂
If you are a starter, this is another design you can consider to build. The step by step instructions provided by Boxy Colonial are easy to follow, and the list of materials and tools are also provided. This farmhouse table can be used for any purpose like reading or writing, playing cards, eating, or any other activities where you need a table. Six people can easily sit at the table together. 

I wanted to make more elegant jewelry tree that’s the reason I search on YouTube for a different tutorial of the jewelry hanging tree. If you are facing trouble in making jewelry hanging tree from the wood you need to try first simple one. In this link, you can see how you make this tree? And what kind of jewelry you can hang on this tree. Must watch this link so you can try easy one
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
This design looks extremely stylish which you will want to sport in your kitchen or living space. However, you might think it will be difficult to make this stylish three pedestal table but stay rest assured, even if you are a novice at woodworking, you can create this project with ease. The design is extremely simple to make and brings a charming feel to your room.
Building a wine rack is usually a very common beginner's woodworking plan. Creating a wine rack is an easy plan that can most of the time be completed in a day or half, depending on how large and detailed you would like it to be. And the better news is that this free wine rack plan will let you build you a great looking wine rack for much less than it would cost.
My own personal shop is a 20x20 section of my garage. Some people might argue that I've got plenty of space, but those people obviously feel their lives are complete without owning a panel saw. I'm not judging. I'm just saying that panel saws are awesome. And even with four-hundred square feet I need to find some creative storage solutions in the shop to accommodate my power tool addiction. There are plenty of people who have done a lot more with a lot less. Here are some of my favorite space saving workshop ideas.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
#00 Steel Wool and White Vinegar – Put a handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least a couple days. The mixture will get darker the longer you let it sit. Once diluted, simply paint the mixture on your piece. Oxidation will occur and the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all.
Hand saws are a good option for making quick cuts that don’t need to be perfectly straight. They do take some muscle as they are non-powered, but are perfect for a quick job. The downside to hand-saws is you will need a different saw for each type of material you need to cut, so if you’re trying to cut wood and sheet metal, that’s an additional cost.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.

Table aprons are the boards that make up the sides of the table base and connect the legs.  They are also called table skirts.  Dimensions are 3 1/2" wide and 22 1/4" long across the ends and 62" long down the sides.  For a 34x72 inch table and 4x4 legs, these apron lengths inset the legs roughly 2" on all sides.  The wood is 3/4" to 1" thick rough-cut wood from our old barn.  The red color was a little stark so I sparsely brushed a coat of chalk paint on and waxed again with Briwax.
There are different grades of tools available at different prices. Salesmen will probably tell you to get good quality tools that last a lifetime. But the price difference between a cheap tool and a good quality tool can easily be a factor of four. My advice is to get cheap tools first and use them until they break. Once they break, it's time to consider getting something better. But unless you are a professional who uses the tools every day, even a cheap tool is likely to last a long time.
If you need more inspiration for your next woodworking project, check out Ted's Woodworking Plans package. It has a massive collection of 16,000 projects with breathtaking step-by-step instructions, blueprints, photos and videos. We definitely got a lot of joy from creating some beautiful projects over the years and we hope you'll feel the same way.
To inset the aprons 3/4" from the outer surface of the legs I made a spacer from 2 pieces of plywood.  This little jig made it easy to keep the distances uniform and also secure the apron to the leg while fastening.  Pic 3 illustrates how the jig, apron and leg are clamped together for fastening.  Each apron end is held by three 2 1/2" pocket screws.  The pocket holes were made using a Kreg pocket hole jig.  I assembled the short ends first and then the rest of the table base making sure the kerf (for clips) was along the top edge.  Since this is a long table I also added a cross piece in the middle of the table using pocket screws.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
This design looks extremely stylish which you will want to sport in your kitchen or living space. However, you might think it will be difficult to make this stylish three pedestal table but stay rest assured, even if you are a novice at woodworking, you can create this project with ease. The design is extremely simple to make and brings a charming feel to your room.
Isn’t it amazing to have a wooden bangle in your hand? I am sure you would like this bangle and would love to wear it. This type of bangle is very rare and it is also very durable. It cannot be broken very easily. You can see the different designs of this bangle and can enjoy wearing it. I am sharing some of the pictures of these bangles; just have a look at these pictures and start your project. These pictures are for your help. So, have a look at these pictures for getting an idea on its making.
East Coast Creative provides this DIY plan to make your farmhouse table which can be used for a picnic with many guests. This gigantic table can fit 12-14 people. Though it does not have benches, the top of the table spreads out like a traditional picnic table. You can add chairs of your choice and so, if you want to add a modern twist, simply choose chairs with modern styles.

Drilling holes sounds pretty simple, and it is! There’s a few tricks though that will help you drill better holes and get more use from your drill. The video below includes tips like catching dust, making guides for drill holes, making sure you drill to the right depth every time, and creating pilot holes. Armed with these tips, your holes should be more consistent in depth, make less mess, and always be in the right place.


This is really easy and simple project. The person who is entry level in wood working can easily do this by following some steps. You can use this as a decoration piece in your home.The main thing is that you need a full command for using wooden tools and machine.It depends on your taste that what style you are presenting in making alphabets. Visit this link if you want to make this project by yourself. In this link you can see how to make alphabet signs.
While metal machinists’ straightedges are ideal for setting up woodworking machinery, their high-tolerance accuracy and weight are overkill for most woodworking tasks. For centuries, shop-made wooden straightedges handled many layout and testing chores, and the tools are still useful today. Wooden straightedges are lightweight, simple to make in any size and can be easily trued with common workshop tools. While straightedges that resemble the machinists’ versions – essentially a skinny rectangle with parallel edges – are useful, these tend to go out of square quickly as the seasons change. However, by understanding a bit about the way wood works, you can make a wooden straightedge that is both accurate and durable.
Below you will find some of the free woodworking plans to be found on the net. Much of the information was gathered from the newsgroup rec.woodworking (also available via google groups). This list is far from complete. I'd suggest you learn to use a search engine like Altavista or Google. Just type in the project name you want to do, and "plans". This will help you find all sorts of things.

This practical entryway storage unit is made from solid wood and is glued together: no nails or screws (apart from those that hold it to the wall) are used. In this case, we made it out of soft maple, but it could be made from any good quality solid wood: pine, oak, birch, fir…whatever best matches the trim or furnishings in the place where it will be mounted to the wall.
A wooden cutting board can be used in the kitchen for cutting purposes. You can see one in the image above. This wooden cutting board can be built by using wooden pallets from your house. You need only a few items to build this beautiful wooden cutting board. I suggest you to make more than one as they can be used anywhere in the house for many purposes. You can easily make it at home and use it for cutting different things in the kitchen. In addition, it adds a nice visual appeal to your kitchen. Make sure to use only high quality items for any woodworking project.
I know you hate to ask for anything, but when it comes to woodworking it will bear you in good stead. You know that, when it comes to computers and carpentry, your grandfather has probably already done it. Call him and ask. Fortunately, there are also a lot of (and will be more) people online who are older than 30, many of whom are retired and lucky enough to be able to spend a lot of time online in woodworking forums answering questions instead of boring day-job office applications. They are helpful, generous and kind. You should approach them earlier and often. One of them will also point you to a veritable treasure trove of saws, and a master saw restorer and seller.
Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8's. Everything else was kept the same as Ana's plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out. 

While metal machinists’ straightedges are ideal for setting up woodworking machinery, their high-tolerance accuracy and weight are overkill for most woodworking tasks. For centuries, shop-made wooden straightedges handled many layout and testing chores, and the tools are still useful today. Wooden straightedges are lightweight, simple to make in any size and can be easily trued with common workshop tools. While straightedges that resemble the machinists’ versions – essentially a skinny rectangle with parallel edges – are useful, these tend to go out of square quickly as the seasons change. However, by understanding a bit about the way wood works, you can make a wooden straightedge that is both accurate and durable.

When you are gathering inspiration for barn door Plan, be sure to note the cost of the tools used in the plan. Barn door tools can often cost more than your actual door! But, there are many clever and affordable do it yourself tools options in the tutorials mentioned below! Let us explore some DIY Barn Door Tutorials. Just click on the blue text below and check some amazing fun Barn doors. They might be different from the one shown in above picture.
While the best look of modern homestead table has been around for a short time, another harvest of farmhouse style feasting tables has been showing up of late. They are an incredible approach to join and investigate a generally present day room. The long pieces of crude wood are emotional without being overwhelming. Many combine press with recovered wood for a modern curve that is tough without being to massive.
Basically, as you beginner you will need the following tools: a drill, an impact driver, a miter saw and a sander. With these tools you can cut, join and finish wood as a professional. If you want to save time and improve the quality of your work you can upgrade and buy yourself a pocket hole jig, a router, a thickness planer and a table saw. I have created a complete guide with tool recommendations and reviews HERE, so you make an informed decision.
TIP: If you like our table but want something that looks a little more polished, just expand the finishing step. Start by sanding carefully and thoroughly, then apply a pre-stain wood conditioner. This will highlight the wood's grain and prevent the stain from absorbing unevenly. Apply your chosen finish in thin coats, carefully sanding out each coat and removing the sanding dust with a tack cloth before applying the next one. Finish the table with a coat of wax. There, now it's shiny.
You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂
With these skills and tips, you should be able to tackle most basic woodworking projects without buying a ton of power tools. Subscribing to these furniture-making YouTube channels Learn To Build Your Own Furniture With These Impressive Carpentry & Woodworking Resources Learn To Build Your Own Furniture With These Impressive Carpentry & Woodworking Resources Few things are as satisfying and relaxing as making something new with your own hands. Programming comes close, at least for me (and I've recently offered some tips on learning to code), but it's still... Read More would be a great start, as well as these general woodworking channels 5 Woodworking YouTube Channels You Should Subscribe To Today 5 Woodworking YouTube Channels You Should Subscribe To Today Even if you're not a woodworker yourself, watching high-quality woodworking videos is a great way to learn about the craft, and who knows, you might even realize you want to make something yourself. Read More  – and we’ve got some great ideas for your home office 9 Beautiful Woodworking Projects For Your Home Office 9 Beautiful Woodworking Projects For Your Home Office Do you work from home? Have you grown bored of your mundane home office? We've got the cure for you. Read More .
Hybrid saws are essentially built like the old contractor saws, but with the motor in the cabinet, just like a cabinetmaker saw. They are much cheaper than cabinetmakers saws and not as heavy. The saw at left is my first table saw, a 40-year old contractor saw, which I enclosed on the bottom to keep the sawdust inside. At present, I use a hybrid table saw

Hi Nancy! I only looked specifically for rectangular tables – sorry!! I do know the blog Little Red Brick House made a round farmhouse table but I couldn’t find instructions for it. Maybe reach out to her and she could give you more details? Here’s the link to her post: http://littleredbrickhouse.com/industrial-farmhouse-dining-room-makeover-one-room-challenge-reveal/ Thanks for stopping by!
Table aprons are the boards that make up the sides of the table base and connect the legs.  They are also called table skirts.  Dimensions are 3 1/2" wide and 22 1/4" long across the ends and 62" long down the sides.  For a 34x72 inch table and 4x4 legs, these apron lengths inset the legs roughly 2" on all sides.  The wood is 3/4" to 1" thick rough-cut wood from our old barn.  The red color was a little stark so I sparsely brushed a coat of chalk paint on and waxed again with Briwax.

In the parties you always need a candle stand for enhancing your decoration. This candle stand is a very stylish one and it always adds beauty to your lounge. In the washroom, you also need some candles while having a bath. In the washroom, you can keep this candle stand on one side. The soothing effect would increase by these candles and this candle stand is really a marvelous one as it is made in a stylish way. You can create it very easily and can give it to your friend as a gift. Let’s have a look at the pictures which I am sharing with you.
Don't believe the mainstream thinking that hand tools are irrelevant, too slow to be useful, or less effective than power tools. Ignore, or at least take with a grain of salt, the power tool devotees who will say "There's a reason they invented power tools, ya know!" Your "shop" is a bench attached to the inside of a coat-closet door in a one-room studio apartment right now. Power tools are going to bother that nice med student next door, and that closet shop doesn't have any ventilation for the amount of dust you'll produce. Hand tools can be more efficient (in speed, quick access, storage, and lack of set up), they're quieter, and the pleasure of silence afforded by quiet hand tools--just a few soft noises produced by your tools--is a pleasure not to be overlooked. They're portable and will move with you, you'll learn more about how different types of wood behave, and, when you run into one of those power tool zealots, just go over to Todd's house and watch a few episodes of The Woodwright's Shop to get your respect for hand tools back in check.

Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
There's no better way to give thanks than to gather family and friends around an enormous table to share a feast. A farmhouse table would be the perfect spot. You could make one out of construction lumber and ordinary hardware in a couple of days. We're not talking precision woodworking here. If you can handle a circular saw and a chisel, you can do this. Farmers used to build these tables themselves, not furniture makers or carpenters, so it's okay if it turns out a bit rustic. That's half the fun. The other half is sitting down to eat at a table you built yourself.

While you can purchase pre-surfaced lumber at your local home center, there are several benefits to buying rough-sawn lumber from a hardwood dealer and milling it to size in your shop. Rough-sawn lumber is typically less expensive than pre-surfaced lumber. And rough-sawn lumber can be milled to custom thickness giving you more flexibility with your woodworking designs. Check out this video for a detailed explanation on how lumber is cut and sold, including how to speak like a pro at the lumberyard and how to calculate a board foot.
Fancy miter gauges sure look nice, with all the coloured bits of anodized aluminium and brass knobs. But are those really something you need? Do you really think that an Incra brand miter gauge made out of bent sheet metal is more trustworthy than the more solid cast aluminium one that came with your saw? Sorry, but those are some of my pet peeves. Build yourself a good table saw sled instead, and you won't need to second guess it. If you cut a lot of 45-degree miters, make another sled with a 45 degree angle.

We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.
This farmhouse table is one of the sturdiest tables that you can make. It can fit in smaller spaces but has ample space for seating four people. You can also fit in six people if you want. The benches provide that extra space and also they look great. The plans are very easy to execute. Solid oak wood is recommended for the top and turned wood legs provide a great look which you can build in about $250.
There was one crack which required stabilization to prevent further splitting.  On an old piece of wood there is nothing more beautiful than a contrasting butterfly inlay to lock the pieces together.  Alternatively you could glue and clamp the split, however it is hard to get enough glue into the crack and an inlay looks much better.  I used a piece of bloodwood and an inlay jig on my router for the butterfly.  This was the first time I've tried inlay and it was very easy.  While the butterfly is beautiful & interesting, it acts functionally as 2 opposing wedges to prevent the crack from widening.  The last pic shows the finished product.

Liz Fourez started Love Grows Wild in 2012 with a passion for interior design and homemaking and a dream to help others create a home they love.  From simple project tutorials, to holiday and entertaining ideas, to her journey renovating a 1940’s farmhouse, Liz demonstrates how to create a beautiful and inviting home with a handmade touch. She turned her signature cozy, neutral style into a best-selling book in 2016 and continues to inspire readers with her captivating photography and easy decorating ideas. Read more about Liz > > > >


A block plane is probably the first hand plane you'll use when getting started in woodworking. It's a relatively affordable hand tool and it's versatile. Plus, its diminutive size makes it easy to use with one hand for all types of woodworking tasks, including smoothing edges, breaking corners, trimming one surface flush to another, cleaning up end grain, and fitting joinery.
Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!
A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
×