I just discovered your site and I’m enamored! You are truly gifted and I love your style. This post really spoke to me because 1. I have sons too 2. We are just about to re-do our kitchen table 3. I just wrote a whole post about our kitchen table on my website. I feel like the kitchen table really is a sacred place for family and it’s beautiful that you built yours together. If you want to read my kitchen table post, check it out at http://kirstenjoyhobbs.weebly.com/homemaker/the-kitchen-table-a-horror-story. Cheers 🙂
This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.
I think this is one of the best feelings if you are successful in making wooden spoon by yourself without any trouble. You can create stylish and unique spoon at home. The only thing is that you just need to follow some steps for making a perfect spoon. In this video, you can see how simply the making of a spoon is and how much you need time for making is explained in this video.
This cute earring box is the ideal one for giving the gifts to your loved ones. Have you ever given your gift in a wooden jewelry box? When you meet with your friends and family it is a very great idea to surprise them with such gifts. They would really admire your selection. I am sharing some of the pictures with you, which are about this earring box. Have a look at these pictures; I am sure you would like them.
Now is where things get fun.  HomeRight sent this awesome paint sprayer and it’s a game changer.  If you haven’t read all those blog posts I’ve written before and told you about how much I hated to paint furniture, I’ll just tell you again.  I hate painting furniture.  But mainly, I hate it because I’ve always done it with a brush.  And nothing ruins a good build job like brush marks…ugh, right?
You must know you should have a bit of woodwork skills to do this innovative and stimulating work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these wooden cutting boards by joining equal size wooden pieces of square shapes. You can also do easily. The tutorial explains the procedure for building this beautiful wooden board.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂
East Coast Creative provides this DIY plan to make your farmhouse table which can be used for a picnic with many guests. This gigantic table can fit 12-14 people. Though it does not have benches, the top of the table spreads out like a traditional picnic table. You can add chairs of your choice and so, if you want to add a modern twist, simply choose chairs with modern styles.
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!

If you want to buy this project, you can easily contact here. The person who is entry level in woodworking project can feel trouble for perfect making, but if you know the step by step procedure you will never face any kind of difficulties. In this link, you will find a different style of chair plus table and personally, I like this style of the project hope you will also like it.


Hand Sanders are the simplest and cheapest sanding you can do and will likely work well for most small projects. You buy the hand sander which is a plate with a handle (typically ~$5) and then attach pieces of sandpaper to the bottom. The biggest advantage to a hand sander is it’s very cheap. It does take a bit of time, but you can achieve a perfectly acceptable finish with it.
Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
This is another very simple and traditional farmhouse table which is extremely strong and durable with no wobbling. Also, from the very look of the table, you can understand that this project will be very to make. This plan has been inspired by Ana White’s DIY plan and modified by DIYPete making the design a unique one. The two benches make the table look simpler and also provide ample seating capacity.
In my design, I considered 3 different types of legs made from 30" long cedar 4x4s.  (You could use other types of wood including gluing three 2x4s together to make solid legs.)  The simplest design was to cut the legs to length and use the 4x4s square.  Second was to taper the two inside surfaces and third was to taper all four surfaces.  I ended up tapering all 4 sides on my bandsaw.  The cut line begins 4" from the top and removes 1/2" at the bottom.  Pic 2 shows how little I removed.  I wanted the legs to have "shape" while remaining stout in appearance and this slight taper seemed about right.  Pic 2 also shows the levelers in the bottom of these legs which were salvaged from a previous project.  I decided to leave the levelers and shortened the legs a bit.
In episode 10 of our series, Getting Started in Woodworking, we complete our first season with a demonstration on how to apply an oil-and-wax wood finish. This finishing recipe is extremely simple and very effective. It will work for about 95 percent of the projects most woodworkers build; the only exceptions are surfaces that need to take a lot of abuse, such as a dining table tabletop.
If you are looking to make a large table for dining or celebrating ceremonies with many guests, the J-pedestal dining table can be a great choice. The design was inspired by a Pottery Barn. This gorgeous table adds class to your space which your guests will also praise. Though the materials can be purchased at affordable prices (costing around $125), you need to have good carpentry skills to make it and also the process is time-consuming. Southern Yellow Pine is recommended to use for the top because not only it is inexpensive but also it is strong and durable.
If you're dreaming of a white Christmas, prep your home with this practical and pleasing boot rack. Blogger Stephanie Lynn constructed this fixture from stock lumber and 2-inch dowels to keep the slush and mud outside the house, where they belong. Glue down the dowels, or leave them dry-fitted so you can disassemble and store the rack easily during the summer months.
There are different grades of tools available at different prices. Salesmen will probably tell you to get good quality tools that last a lifetime. But the price difference between a cheap tool and a good quality tool can easily be a factor of four. My advice is to get cheap tools first and use them until they break. Once they break, it's time to consider getting something better. But unless you are a professional who uses the tools every day, even a cheap tool is likely to last a long time.
Once the backings are connected, you can append the 4×4 leg runners. In the event that you have a Kreg HD, then you can simply penetrate 3 1/2″ stash gaps into the 4×4's. If not, you can simply connect them with 3 1/2″ Spax screws from the front countenances of the legs into the runners. You can conceal the screw openings, with the equipment, toward the end.
Have you ever heard about a chess which is made of wood? If not, then I am presenting a chess which is the most beneficial and attractive one. I am sharing its picture with you and you can make this chess very easily. The most amazing thing is that you can present it as a gift to other fellows. They would surely admire your gift. I am sharing some pictures of this chess; just have a look at these pictures. I am sure you would like these pictures.
You can create a simple and affordable eye catching frame for your artwork out of a great old wooden ladder. Simply turning the ladder on its side will allow you to display quite a lot of art in a row for so little money. This simple home decor craft project is an affordable way to introduce color, the vintage look, and even some architectural interest without costing a fortune.

You're going to connect the two leg–apron assemblies to the stretchers using cross lap joints. These are among the easiest and most forgiving of wood joints to make, and they're also quite sturdy. Mark the joint positions on the legs and stretchers. Start the half-lap joints on the legs by notching the two outside lines with a circular saw set to a depth of 1½ inches. Guide the saw using a triangular rafter square. Between the two outside cuts make a series of relief cuts spaced ⅛ inch apart (fig. 3). Then use a sharp chisel to chop away the waste (fig. 4). When you cut the half-lap joints on the short stretcher, set the saw's depth to 1⅜ inches deep. This will make the stretcher extend ⅝ inch past the surface of the leg when the table is finally assembled. The offset will give you a table that looks like it was built by a farmer rather than by West Elm. It'll look nice.


Hardwood boards and softwoods may look similar in shape and dimension, but they are sold using completely different measuring systems. Softwoods are typically sold in standard lumber dimensions (such as a 2x4), whereas hardwoods are most often sold by the board foot. Calculating board feet helps you guarantee that you're getting your money's worth on every piece of hardwood you purchase.
This table is a little narrower than I would have liked for it's length (34x72), but it's perfectly sized for the space we are using it in.  At 72" long, I would have preferred something closer to 40" wide but this works for us.  The top is made from 16" wide soffet boards from a house I helped tear down when I was 10 yrs old (no, it wasn't the house we were living in).  The old boards have been in the barn for 40 years and needed to be used.  The center painted board is also from the same house.  
9. Support the spindle with one hand as you cut icicle shapes. First turn a tenon at the tailstock end to fit the lower hole in the ball. Undercut the tenon’s shoulders so the icicle fits tight on the rounded bottom of the ball (Fig.A).Then turn the larger diameter cove, beads and fillets. Move downhill towards the headstock to cut the smallest diameters last. Apply a finish.
East Coast Creative provides this DIY plan to make your farmhouse table which can be used for a picnic with many guests. This gigantic table can fit 12-14 people. Though it does not have benches, the top of the table spreads out like a traditional picnic table. You can add chairs of your choice and so, if you want to add a modern twist, simply choose chairs with modern styles.
Because the legs I used are rather large and chunky, I wanted my apron to be larger than normal so it looked proportional.  Typically, a 2×4 is fine for an apron, but I used 2x6s and cut them down to 4 1/2″ wide using a table saw.  A standard 2×6 is 5 1/2″ wide.  You could leave it at 5 1/2″, just keep in mind the chair height and make sure you will have enough leg room to slide under.  If you wanted a less chunky leg, Timber Wolf has many other options on their website 🙂
This project turned out to be something incredibly special to our family… something we all built together. Normally, I try to keep the boys entertained with something while I work on blog projects, but this table was different. This is the place we gather for every meal. The place where holidays, birthdays, and Taco Tuesdays are celebrated. The place where we talk and struggle through math homework and compare biceps with each other.

Use: White vinegar poured into a glass jar with steel wool that you have pulled apart and loosened. After fifteen minutes, brush onto the wood. After the surface is dry, you can leave it as-is or clear coat it with a product like Minwax One Coat Polyurethane. Distress prior to finishing, if so desired.http://www.wikihow.com/Age-Wood-With-Vinegar-and-Steel-Wool
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!
You're going to connect the two leg–apron assemblies to the stretchers using cross lap joints. These are among the easiest and most forgiving of wood joints to make, and they're also quite sturdy. Mark the joint positions on the legs and stretchers. Start the half-lap joints on the legs by notching the two outside lines with a circular saw set to a depth of 1½ inches. Guide the saw using a triangular rafter square. Between the two outside cuts make a series of relief cuts spaced ⅛ inch apart (fig. 3). Then use a sharp chisel to chop away the waste (fig. 4). When you cut the half-lap joints on the short stretcher, set the saw's depth to 1⅜ inches deep. This will make the stretcher extend ⅝ inch past the surface of the leg when the table is finally assembled. The offset will give you a table that looks like it was built by a farmer rather than by West Elm. It'll look nice.
*Please NOTE: While my table has held up well and had only a small amount of movement after 2 1/2 years, there are certainly things I would do differently with more experience under my belt. For beginners, I'd recommend using biscuits and glue for the top planks. Dowels or floating tenons/dominos are another option. Do make sure to let the wood properly dry.
This wooden sofa side table can also be made in different sizes and shapes as you can find on the internet. Some of the items you will need for this project are wooden pieces, cutter, screws, etc. We have included a video tutorial here that illustrates the process of building a wooden sofa side table. This is not the exact one that you see in the image above, but it can be modified to build any shape or design you want. The video tutorial also has English subtitles to make it easy for anyone to understand and follow the steps.
You can make this table with a budget of around $100 from solid wood which makes the table extremely sturdy and durable. The inspiration was drawn from Restoration Hardware Provence table, and Anna White provides this plan with a little twist. The project is very easy to complete from 2x4s. 4x4s are difficult to find and also expensive. Moreover, you will find it difficult to cut and join 4x4s tending to warp.
Liz, Great job on your new table and benches. They really look great. Love the chandelier also. Wanted to let you know that after I saw your tutorial on the board and batten in your living room and dining room, it really inspired me. I said to myself, “I can do that.” So, with that in mind, I am just finishing up board and batten in my laundry room. It was really an easy project and I love the results. It really perks up a drab old laundry room. I ended up doing all the work myself. The only help I asked my husband for, was with the nail gun, as we had to really get into some tight places. All in all, though, I am very pleased with it. Thanks for the idea.

Table saws, band saws, and radial-arm saws are examples of woodworking machines that are most often used exclusively in a wood shop because they are far too large and cumbersome to be portable. Even though they're confined to the shop, these workhorses are so useful that it makes sense to complete a woodworking project in the shop and carry the finished piece to the location or job site where it will be used or installed.
Another way to customize the look of your table is with the top shape.  In addition to traditional rectangular and round table tops, we also offer oval and racetrack tops.  What’s that?  A racetrack table top has curved ends and straight sides whereas an oval top is curved on all sides.  As with table bases, it is important to consider form with functionality!  In addition to shape and size, all of our table tops come in standard (about 1″), thick (about 1.5- 1.75″) and extra thick (+2″) thicknesses.  Do you need an extra large table, a very narrow table or an odd shape?  All of table lengths, widths and shapes are customizable.  Just ask us if you don’t see the exact size you are looking for!
The video above includes a step-by-step tutorial for making a wooden toy house. By following these steps, you can easily make it by yourself. You will also need some basic woodworking items, such as wood, pop sticks, cutter, glue and screws, etc. Even if you do not like this one, you can always browse the internet for more beautiful wooden toy houses ideas. I have also shared a link where you can find some really interesting and beautiful wooden houses ideas for every kind. Just select the one you like the most and start building.
I few years ago I made a build plan for Remodelaholic for a super adorable House Frame Bed. The build plan was inspired by this darling room shared by an Australian magazine, Home Life.  Over the years a few requests have been made for a full size mattress version. Here it is --> How to Build a House Frame Bed - Full Size This bed is designed to fit a full mattress 53" x … [Read more...]
Just check out this enticing and legant mirror that portray woodworking art finely blended with creativity. You can have it on the wall, especially in the lobby it looks great. It enhances the looks of your dinning room and your drawing room. I just found this over the interent and people are highly admired by this design. So, lets have a look at its image, you will get guidance on making it.
Have you ever heard about a chess which is made of wood? If not, then I am presenting a chess which is the most beneficial and attractive one. I am sharing its picture with you and you can make this chess very easily. The most amazing thing is that you can present it as a gift to other fellows. They would surely admire your gift. I am sharing some pictures of this chess; just have a look at these pictures. I am sure you would like these pictures.
It's nice to be on your site getting plans and building projects.  I was so inspired by you I went out and bought Ryobi tools, and have since built 3 projects all on http://www.Ana-White.com/ by you.  I loved building the Potting Table, and better yet my Mother loved it when I gave it to her as a gift.  I am now working on the Farm House style Table and Benches.  I can't wait to see how they turn out!  

Have you heard about the wooden swords for decoration? If no, then I am sharing the picture of the wooden swords with you. This is an ideal gift for giving your loved ones. You can hang these swords on the wall and in the lobby. It looks great and gorgeous. Have a look at the pictures which I am sharing with you, I am sure you would like these pictures. These are the pictures which are best for wall decoration. So, you should choose these swords for giving the gifts to your loved ones.
This is another basic farmhouse table design which you can easily build. However, the table is large with a seating capacity of at least ten people. This table is also a great addition to be in your home as it serves many purposes including storage apart from dining. The instructions are provided in two separate parts; first part includes the construction process and the second part includes the finishing touches.

In episode 10 of our series, Getting Started in Woodworking, we complete our first season with a demonstration on how to apply an oil-and-wax wood finish. This finishing recipe is extremely simple and very effective. It will work for about 95 percent of the projects most woodworkers build; the only exceptions are surfaces that need to take a lot of abuse, such as a dining table tabletop.
I recently came across this beautiful wooden hanging swing, which was made in the square shape. The very first look was enough for me to start loving it. Although I haven’t yet tried building one myself, I am definitely going to. You can also make one for elders and put it in your garden or terrace or anywhere in the house. Elders can use it to relax and the kids can use it to play or sleep. Although this is a really beautiful piece of woodwork, it is not that easy to make. Only someone with good woodworking skill can think of making this swing set.

This wood bench plan is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. My neighbor saw a cute wood bench at a local restaurant and wanted one for her house.  She snapped a few pics for me, … [Read more...]
All of our tables are available in the color and finish of your choice.  Our existing color pallet includes 90 paint colors,  multiple stain color options in each workshop collection and several wax color options for our reclaimed woods.  Please feel free to explore all of our paint and stain options to help guide your design plans.  All of paint and stain finishes include a durable water based clear top coat.  This makes it easier to keep the table top clean with a damp sponge (no chemicals!) and provides protection from water rings. (How to Clean a Wooden Dining Table) 
Chances are in any woodworking project, you’re going to have to connect two pieces of material. Screws are ideal for this – much better than nails – but there are hundreds of different types and sizes, all for different applications. We will review the most common types and applications so that you can quickly determine what type you will need for your project and how to use it.
Backpack storage and organizer Plans and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Milwaukee hammer drill/impact combo, Diablo … [Read more...]
The cost of being disorganized is time. It takes me ten times as long to work on a project when I am scouring the room looking for a drill bit, the right screws, or trying to remember where I last used one of my 10 tape measures. Workshop organization is an ongoing project. As you acquire more tools, you have to rearrange your shop to work in storage for those new items. So mobile and modular storage, wherever possible will save you time down the road. Here are some amazing Workshop Organization Ideas that I hope will inspire you!
This is another simple table design provided by HGTV which you can make without prior woodworking experience. Though simple, it is gorgeous where you can add decorative chairs to make the look of the set even more attractive. Even if you are an expert in carpentry but want to bring that rustic appeal of a farmhouse table, consider this DIY plan. Solid pine wood is recommended because it adds more character to the looks of this farmhouse table. It measures 96 inches in length, 38 inches in width and 30 inches from the floor.
After we got all our aggression out on the table, I applied a coat of Minwax pre-stain wood conditioner followed by a custom stain I came up with. I’ve purchased several “gray” stains that are supposed to give the wood a weathered, rustic look, but no matter how many coats I add, the gray barely colors the wood at all. I wanted the table to still be light enough to show all the wood grain, but have that old, weathered look to it, and this is the perfect mix I came up with:

Build your own platform bed frame at your home by following the source linked tutorial given above. The source link also includes more pictures that can help you to build a better bed frame. You can see a step by step set of instructions and guidelines to follow with real life pictures, as well as you can download a PDF file detailing the list of materials and tools you’ll need, know about the length of every board, and most importantly color-coded illustrations of the building process.
This Privacy Policy covers CanadianWoodworking.com's treatment of personally identifiable information that CanadianWoodworking.com collects when you are on the CanadianWoodworking.com site, and when you use CanadianWoodworking.com's services. This policy also covers CanadianWoodworking.com's treatment of any personally identifiable information that CanadianWoodworking.com's business partners share with CanadianWoodworking.com. 
×