Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8's. Everything else was kept the same as Ana's plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
A luminaria (often called luminary) is a traditional Mexican lantern made from a paper bag with sand and a candle inside. We’ve add some woodworking panache to these outdoor accents and build our luminarias from wood, with box joints and a star-shaped cutout. They’re beautiful — and reusable — ways to brighten patios, steps and walkways this holiday season. 

You can also make wonderful variety of wooden boxes easily at home. It is actually very stress-free and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and stimulating work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these wooden boxes by joining equal size wooden pieces of square shapes. You can also do easily.
Disclaimer: Although it is my intention to provide accurate plans and clear instructions, not all plans have been tried and tested. Using plans or information found on SawdustGirl.com indicates that you agree with the Terms of Use policy and will accept full responsibility for the process and outcome of any project you attempt. All plans are for private use only. Plans and information published on SawdustGirl.com may not be reproduced, republished or distributed in any manner without written permission from Sandra Powell, Sawdust Girl. Actual projects built using Sawdust Girl plans may be published on your own site without instructions or "tutorial" as long as you provide a link to my original post with full post title or "SawdustGirl.com" as link title.
We are moving into the new house, but with so many, many functional projects to tackle (like closets and pantry cabinets), a beautiful dining table is way down on the priority list.  But still, I insisited we need a dining table to move in.  Once you give in to the kids eating on the couch, you're done ... or at the very least have to be the bad guy and retrain the family.  
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
If you have a small space in your kitchen or living space but require a table for dining or if you are fascinated with roundtable designs, you can consider this free DIY plan form Lane Home Co. to be a great option. Not only this table looks nice but also it is very sturdy with layered centered cross base in a V-shape. You might feel the table is difficult to make, but if you have the right tools and carefully follow the instructions, you will be able to accomplish the task easily.
If you are a starter, this is another design you can consider to build. The step by step instructions provided by Boxy Colonial are easy to follow, and the list of materials and tools are also provided. This farmhouse table can be used for any purpose like reading or writing, playing cards, eating, or any other activities where you need a table. Six people can easily sit at the table together.
Actually, you're going to have the opposite problem because you'll meet people who DO cheap out on tools and find they don't work all that well, wear down quickly, and don't last that long. You will want the best of best but not be able to afford them all the time. You will find, more often than not, that some very good tools are available in the mid-priced ranges: not the least expensive but not the most, either. For example, these two sets of chisels are not terribly expensive but well made and a great quality for the price: Marples and the beginner's set I got from Woodcraft that's Made in the USA. You can ask for the nicer ones for Christmas when people ask for ideas. It's good to think of tools as things that you buy once, where possible, but there are some deals to be had.

The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
With a little woodworking knowledge and use of some basic items, you can build a wonderful tissue box holder of your own. You can easily build them in bulk and then sell at good rates. Although easy, a wooden tissue box is an equally important and useful item for households. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. These wooden items give a classy look to your interior furnishing. This is the easiest way to spice up your tables with beautiful wooden tissue boxes. By doing this you can give style to your table settings.
I think YouTube is the best place to find different tutorials. It totally depends on your choice that what shape you is selected for Dice. You can make two different shapes of wooden dice that is rounded or square. You can also put different colors in dice to show the uniqueness of DIY wooden art. Here is one more link to understand the step by step link.
Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes.
This Privacy Policy covers CanadianWoodworking.com's treatment of personally identifiable information that CanadianWoodworking.com collects when you are on the CanadianWoodworking.com site, and when you use CanadianWoodworking.com's services. This policy also covers CanadianWoodworking.com's treatment of any personally identifiable information that CanadianWoodworking.com's business partners share with CanadianWoodworking.com.
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!
Drilling holes sounds pretty simple, and it is! There’s a few tricks though that will help you drill better holes and get more use from your drill. The video below includes tips like catching dust, making guides for drill holes, making sure you drill to the right depth every time, and creating pilot holes. Armed with these tips, your holes should be more consistent in depth, make less mess, and always be in the right place.
By video tutorial, you will get step by step process instructions of making a nice wooden folding sling chair from scratch. However, my first wooden chair was not the best one, but it was good enough to motivate me to make some more folding chairs like this one. If I can make this, you too can make one yourself. You can browse the internet for more folding sling chairs ideas and start making one now.
Hey I love this article,Thanks. 4 months ago, I started looking for woodworking. The industry is extremely interesting but I have problems with how I can do it.My uncle who has been doing more than me in this industry, has suggested to me to follow Teds plans, Do you think it’s a good move to follow these plans? ? I keep reading good reviews about Teds Plans but I am unsure if it will still work on me.At this time I can purchase these plans at a very low price,so if possible can you leave me feedback on wether I should do it or not. It would mean a lot coming from an expert in this field.
If you don’t have a large space for dining, you can check this plan. This design from Instructables is very basic to make and can easily fit in your small space. However, it has the capacity for six people to sit together at the table. The cost depends on the type of lumber you are using; construction grade pine wood might cost around $50, and if you are using furniture grade lumber, it might cost approximately $120.

As you can see in the image, this beautiful heart shaped wall hanging wooden piece on the wall. It looks beautiful and can be used to surprise someone special. The shape and design of this wooden hanging depend on how properly you build it. First time workers definitely need some guidance to help them with the process. You can choose the wood type, color and design as you like for your project. You can easily make it at home by using some artthings. You can decorate your wall hangings with different materials, designs and styles. I am actually making one of this wooden heart shaped hanging in my home. It is perfectly cool and artistic work. These hangings may be adjustable or a fixed.
The most useful stationary tools are a drill press and a table saw. For the longest time, I only had a cheap old contractor saw, and only a very small drill press, but I made do with those. The difference between a good drill press and a cheap drill press is much smaller than the difference between a cheap drill press and no drill press, so don't wait until you can afford the perfect one.

Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
Methods for skinning a cat have nothing on ways to build a bench. Explore different joinery methods and work with those that you are able to complete the best. Don't overcomplicate something when it doesn't need to be. There's a reason tools have improved, glue has gotten better, fasteners stronger, and new joinery methods have been introduced. A lot of the time the focus in woodworking is on finding shortcuts to get the same or better results. Don't let joinery snobs influence you.

The cost of being disorganized is time. It takes me ten times as long to work on a project when I am scouring the room looking for a drill bit, the right screws, or trying to remember where I last used one of my 10 tape measures. Workshop organization is an ongoing project. As you acquire more tools, you have to rearrange your shop to work in storage for those new items. So mobile and modular storage, wherever possible will save you time down the road. Here are some amazing Workshop Organization Ideas that I hope will inspire you!
During the late Victorian era, wooden items for decoration started to attain popularity. Wood is having a significant role in our life. These wooden items give a classy look to your interior furnishing as well as carry different items. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work.. It is actually very easy and interesting to make. Size, shape, design and number of compartments are according to your choice when you made it.

Wow, this is really big rolling dice and the special thing of this dice is that it is made from wood. I think wooden dice are durable dice. This is one of the best decorations I have ever found. The main question is that why it is so special for me? Basically, I am a game lover and I have made this wooden dice for the decoration of home. The size of this dice is large instead of normal games dice. This is really special project for me that am the reason I make it with full charm. You can see the full image of beautiful dice in the following link.


Disclaimer: Almost any DIY project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Rogue Engineer has made every effort to be complete and accurate in the instructions provided on this website. Rogue Engineer will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer's operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.
The article explains step by step process for making this awesome piece of wooden art. It is actually very easy to make one.This tutorial shows the making of wooden box with one of the easiest ways. However, it is a bit difficult to make them, but not so much.I make this wooden box at home easily. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps.
Avoid machines that can be converted from one machine to another. The ShopSmith is a prime example of such a machine. Multi purpose machines are usually good at one or two functions, but other aspects are compromised. But the real problem is that every time you need to switch functions, you need to convert the machine. And the cost of these machines is usually high enough that you could get several single function machines for the same price.
When you are gathering inspiration for barn door Plan, be sure to note the cost of the tools used in the plan. Barn door tools can often cost more than your actual door! But, there are many clever and affordable do it yourself tools options in the tutorials mentioned below! Let us explore some DIY Barn Door Tutorials. Just click on the blue text below and check some amazing fun Barn doors. They might be different from the one shown in above picture.
Pegboard is the master of all workshop organizational tools. You can buy full sheets (4x8) at any big box store, but most also sell smaller, more manageable sheets. And while you can just slap these up on any wall, something like this fold-out wall cabinet will double your storage and keep your tools tucked safely away. You could also try this fancy sliding-door version.

Woodworking is accessible to people of all ages, skill levels, and budget. Don't expect to be the Wood Whisperer overnight, but there are plenty of woodworking websites that offer free plans and tutorials to help you every step of the way. One of these sites is Chief's Shop from Chris Hill, who has been a woodworker his entire life. He offers some great advice for woodworking newbies, which is also a great reminder for those with a bit more experience:


Woodworking project plans provide extensive assistance. Project plans are available with variations of Santa and his sleigh and reindeer, candy canes, polar bears, trains, and toy soldiers. Or maybe you’d prefer a more religious display. Wouldn’t an angel or a nativity scene look heavenly on your front lawn? You’ll be able to find project help for practically anything you think of related Christmas.
Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes.
By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post.
You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.
Douglas fir from home improvement centers will almost always warp when you try to make a flat top. It is never dried to the same extent as hardwood and ships out for the purpose of being used as framing lumber, not furniture lumber. That said, you can do it, but buy it and let it sit in your garage for a few months or longer to let it further dry and acclimate to your environment. Even better if you plane it down after that waiting period, then allowing it to acclimate for another week or so to make it works out all of its twists prior to being turned into a top. Do you have any hardwood dealers in your area? Try visiting one and make an investment in your table...buy some good maple (soft maple is worlds harder than new douglas fir - you don't need hard maple, ie:or sugar/rock maple).
A wooden cutting board can be used in the kitchen for cutting purposes. You can see one in the image above. This wooden cutting board can be built by using wooden pallets from your house. You need only a few items to build this beautiful wooden cutting board. I suggest you to make more than one as they can be used anywhere in the house for many purposes. You can easily make it at home and use it for cutting different things in the kitchen. In addition, it adds a nice visual appeal to your kitchen. Make sure to use only high quality items for any woodworking project.
Hardwood boards and softwoods may look similar in shape and dimension, but they are sold using completely different measuring systems. Softwoods are typically sold in standard lumber dimensions (such as a 2x4), whereas hardwoods are most often sold by the board foot. Calculating board feet helps you guarantee that you're getting your money's worth on every piece of hardwood you purchase.
If you're dreaming of a white Christmas, prep your home with this practical and pleasing boot rack. Blogger Stephanie Lynn constructed this fixture from stock lumber and 2-inch dowels to keep the slush and mud outside the house, where they belong. Glue down the dowels, or leave them dry-fitted so you can disassemble and store the rack easily during the summer months.
The best thing about the toy chest is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can also modify your kid’s toy chest in any way you want or build in a different design or color different from the one pictured above. You can try some other designs for your plan in the below-mentioned link.
Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.
In this month’s woodworking project demonstration, George Vondriska teaches you the step-by-step process for building a coat tree that will look great in your home or workshop. He demonstrates the simple techniques for installing wrought-iron hooks, crafting the coat tree’s feet, and quarter sawing to achieve that beautiful face grain on all four sides.
Chances are in any woodworking project, you’re going to have to connect two pieces of material. Screws are ideal for this – much better than nails – but there are hundreds of different types and sizes, all for different applications. We will review the most common types and applications so that you can quickly determine what type you will need for your project and how to use it.
Sometimes Grandparents can be hard to buy gifts for, they seem to have everything already. But hey you can't go wrong with darling gifts of grand kids, right!?! In this post I'm going to share a couple of ideas for personalized photo gifts. To make the photo gifts, I will be using Photoshop Elements 2018. I have been using Photoshop Elements ever since I graduated from trying … [Read more...]

The most useful stationary tools are a drill press and a table saw. For the longest time, I only had a cheap old contractor saw, and only a very small drill press, but I made do with those. The difference between a good drill press and a cheap drill press is much smaller than the difference between a cheap drill press and no drill press, so don't wait until you can afford the perfect one.
Woodworking is one of those activities that stimulates your creativity and gives you self confidence. As any other hobby, you should start with basic projects so you get accustomed with the skills and then move to more challenging projects. If you have a stressful life or you are just looking for an activity to help you bond with your family or friends, doing DIY projects is the ideal choice.
Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts. 

In regards to flattening the top, another technique would be take a pencil (soft lead) and lightly draw some big lazy squiggles across the top - enough so that there is a line every few inches. Then, use either a jointer plane or a belt sander to flatten the top until the squiggles are gone. The lines give you a reference to what is high and what is low - and when you are finished in a particular area. With the jointer plane, you want to stroke at about 45 degrees to the grain of the wood, and with a belt sander, you want to keep the sander flat on it's platen (don't let it tilt and dig in) and use wide, arcing, sideways sweeps with very light pressure - again at about 45 degrees to the grain of the wood - never let the sander start or stop when in contact with the surface. In both cases, finish with light sanding with either a belt sander, linear sander, or by hand, stroking in the direction of the grain. Palm sanders can leave swirls.
Have you ever seen three cats lying on each other? I am sure you would like these cats and these are the most beautiful one. This craft is amazing and need some concentration and effort. For your friends and family members this is an outstanding gift. They can decorate these cats in their lounge. Your friends would surely admire this decorative piece. Just have a look at this decoration piece; you would surely get an idea on the making of it. I am sharing some of the pictures with you . Just have a look at these pictures.
In this month’s woodworking project demonstration, George Vondriska teaches you the step-by-step process for building a coat tree that will look great in your home or workshop. He demonstrates the simple techniques for installing wrought-iron hooks, crafting the coat tree’s feet, and quarter sawing to achieve that beautiful face grain on all four sides.
Finally, a word on glues: You might want to do some experimenting with polyurethane glue instead of aliphatic resin (wood) glue. Polyurethane glues require a slightly different work flow, but since switching to polyurethane about 15 years ago, I can't see going back. I use aliphatic glues for some things (like biscuit joints) - but not very often. Polyurethane glues actually harden (aliphatic resins remain "liquid"), poly takes stain like wood (no bright areas where the stain wouldn't bond to the glue lines), poly doesn't dull tools or gum up sandpaper, poly is waterproof and can fill minor gaps. My favorite brand, so far, is Gorilla Glue.
Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools. Next to the radial arm saw and in the corner is the floor drill press with accessory storage next to it for all drilling operations.  Across from the radial arm saw is a separate workstation set up with a small portable table saw and router set-up with storage underneath for routers, bits and accessories.
I have so many free woodworking plans on the site, that it is so hard for a beginner to choose something both simple to build and fulfilling. That is why, I decided to make a short list with my top 20 favorite projects that can be built by any person with basic woodworking skills and limited tools. Even if it might look intimidating at first, my detailed plans and step by step instructions make it really easy for anyone to get the job done.
Woodworking is based on a small number of core skills that when combined in various groupings make it possible for us to build a huge range of projects. Unfortunately, too many new woodworkers do not take the time to learn the core skills, opting to jump ahead of themselves to projects that seem more appealing at the moment. Very often, acquired bad habits and frustration are just around the corner.
Next, make your breadboard top out of four 2×8's and 1 2×10. Ana's plans call for all 2×10's, but I wanted to use 2×8's because they are easier to work with. I don't have a photo of the process, but if you go to the 11:18 mark on the video below you can see the process involved with attaching the top boards. You will need a Kreg Jig and 2.5″ Kreg screws for this process. Once the top is assembled, center it on the base and attach to the base from unnderneath. Use 4.5″ screws to connect the 4×4's to the top and 2 or 2.5″ screws to anchor the top to the 2×4 horizontal boards.
There was a time when working with woodworking was considered a waste of time. That trend has subsided with contemporary interior designing commanding a stiff price. If you have the right skills then you can surely make a career out of your skills but as they say "nothing comes easy". Woodworking is no different. If you don't have the skill, yet, start with these beginning projects.
Living in South Florida gives me the ability to work under the bright Florida sun by simply rolling the woodworking power tools out from under the roof. On days like the one when this photo was taken, when rain is expected later in the afternoon, most of the tools can be kept under the roof, and rolled away into large lockable storage rooms in less than five minutes. 

Now is where things get fun.  HomeRight sent this awesome paint sprayer and it’s a game changer.  If you haven’t read all those blog posts I’ve written before and told you about how much I hated to paint furniture, I’ll just tell you again.  I hate painting furniture.  But mainly, I hate it because I’ve always done it with a brush.  And nothing ruins a good build job like brush marks…ugh, right?
This saw has changed my life. I literally cannot even tell you who I am anymore. I have been reborn, and into a world where the lion lays with the sheep in euphoric happiness and cooperation. The skies are bluer now than ever before. My tastebuds have been supercharged; my skin feels tingly all through the day; my mind has been freed and I have new purpose and resolve.
Choose a light-colored wood with interesting grain for the ball. It should be one solid piece, 2 1⁄2- to 3-in. square. I like to make more than one ornament at a time, so I use a rough blank about 8-in. long in order to make two balls. Make the cap and icicle from a contrasting dark wood that takes fine details. I like to use rosewood or ebony. You’ll need a piece that’s 1-in. square and 8-in. long.
Wood screws often have a coarse pitch, unthreaded shank (the bit between the head and the tip), and flat heads. The coarse pitch helps the wood screw tap into the wood and make a solid connection. The unthreaded shank is used so that the head can go flush with the wood beneath it without the threads getting in the way. Flat heads are typically used so that the screw can sit flush against the wood. Most wood screws also require a pilot hole, which you should drill with a drill bit prior to screwing the screw into the wood, find a chart on what size hole to drill for what screw here.
Woodworking is based on a small number of core skills that when combined in various groupings make it possible for us to build a huge range of projects. Unfortunately, too many new woodworkers do not take the time to learn the core skills, opting to jump ahead of themselves to projects that seem more appealing at the moment. Very often, acquired bad habits and frustration are just around the corner.

There are also project books that provide fun new ideas to play with on the scrollsaw, and the fun is made even better when you’re being productive by making gifts at the same time. If you’re a carver, there are many project ideas available to you, as well. There are also Christmas projects for the woodturner. One popular idea is to make ornaments for your tree—or someone else’s. There are several books that will provide help specifically for making ornaments. You’ll find that woodturning allows an opportunity for endless creativity! You can find a variety of kits available, and then you can use whatever material you prefer to turn and then shape and finish any ornament you can imagine!

The table top was then sealed with multiple coats of Varathane for protection.   We chose not to add a stain to the top because its natural coloring is gorgeous already.  There are shades of browns and grays in the wood along with saw marks from the original milling, knots, and grooves that you would come to expect from a reclaimed barn wood table.

Liz, Great job on your new table and benches. They really look great. Love the chandelier also. Wanted to let you know that after I saw your tutorial on the board and batten in your living room and dining room, it really inspired me. I said to myself, “I can do that.” So, with that in mind, I am just finishing up board and batten in my laundry room. It was really an easy project and I love the results. It really perks up a drab old laundry room. I ended up doing all the work myself. The only help I asked my husband for, was with the nail gun, as we had to really get into some tight places. All in all, though, I am very pleased with it. Thanks for the idea.
×