This farmhouse table is one of the sturdiest tables that you can make. It can fit in smaller spaces but has ample space for seating four people. You can also fit in six people if you want. The benches provide that extra space and also they look great. The plans are very easy to execute. Solid oak wood is recommended for the top and turned wood legs provide a great look which you can build in about $250.
Sand the table smooth. Start with 80-grit sandpaper, and move to a finer grit for each pass. You should end with 220-grit. I finished the table with two coats of Jacobean-tinted polyurethane, then buffed on a couple of coats of wax after it was dry. The dark tint hides any scratches or nicks and also makes it look like it was built a century ago. On that note, you can give up your coasters—a little wear will only make your table look better.
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!

Disclaimer: Although it is my intention to provide accurate plans and clear instructions, not all plans have been tried and tested. Using plans or information found on SawdustGirl.com indicates that you agree with the Terms of Use policy and will accept full responsibility for the process and outcome of any project you attempt. All plans are for private use only. Plans and information published on SawdustGirl.com may not be reproduced, republished or distributed in any manner without written permission from Sandra Powell, Sawdust Girl. Actual projects built using Sawdust Girl plans may be published on your own site without instructions or "tutorial" as long as you provide a link to my original post with full post title or "SawdustGirl.com" as link title.


Hybrid saws are essentially built like the old contractor saws, but with the motor in the cabinet, just like a cabinetmaker saw. They are much cheaper than cabinetmakers saws and not as heavy. The saw at left is my first table saw, a 40-year old contractor saw, which I enclosed on the bottom to keep the sawdust inside. At present, I use a hybrid table saw
If you have limited space but want to have a full-sized farmhouse table, this table plan is perfect for you and is a gorgeous one. However, this plan requires some carpentry skills, and though it is designed to be thin, it has the capacity for seating six people. A metal pipe is attached to the inside of the legs reaching across the bottom which makes the table sturdy without any chance of wobbling. If you place contrasting chairs, the table looks even more splendid.
After the second coat, I let the table dry completely. Then, I took a 400 grit sanding blog and quickly sanded the top surface and legs. This smooths out any bumps or dust that may have dried in the finish. After sanding, take a damp rag to clean off the sawdust. Lastly, use a clean rag and wipe a very thin 3rd coat on all of the parts you sanded. This will give the table a final shine. Let the table dry and air out for awhile.
TIP: If you like our table but want something that looks a little more polished, just expand the finishing step. Start by sanding carefully and thoroughly, then apply a pre-stain wood conditioner. This will highlight the wood's grain and prevent the stain from absorbing unevenly. Apply your chosen finish in thin coats, carefully sanding out each coat and removing the sanding dust with a tack cloth before applying the next one. Finish the table with a coat of wax. There, now it's shiny.
Methods for skinning a cat have nothing on ways to build a bench. Explore different joinery methods and work with those that you are able to complete the best. Don't overcomplicate something when it doesn't need to be. There's a reason tools have improved, glue has gotten better, fasteners stronger, and new joinery methods have been introduced. A lot of the time the focus in woodworking is on finding shortcuts to get the same or better results. Don't let joinery snobs influence you.
As with most websites, we do log web visits. This information, however, does not have a link to you personally. These logs help us understand the needs of our audience and the areas of our site that you do or do not find useful. When you simply browse our site, no personal information is being collected.  We may disclose this non-personal information to third parties such as sponsors, clients or advertisers.
You’ll need to buy 4×4, 2×10, and 2×4 boards for this project. These boards can be found at your local lumber yard. Take your time to find quality boards that are straight and have little warp. First, I built the table top out of 2x10s. I used 5 2×10’s for the main part of the table and a 2×10 for each breadboard end. Ana’s plans call for four main boards, but I wanted a little larger area to spread out. I used a 12″ miter saw to make all of the cuts. I cut the 5 boards to 69 inches long.

Through this project, you can convey a message for your love ones. You can make a whole name, a message or anything which you like most for conveying a message. You can make any kind of alphabet or numbers by using wood.All of you need a full command of handling woodworking project. You can give this frame to your love ones as a special gift for any occasion and the person who receives this will like itdefiantly. Basically, this concept is the mixture of art and creativity from wood. The creative mind can easily reach at the top level of woodworking project through a better way. You can see the full size of this image by following this link.


To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
If you are looking for a simple design for making your farmhouse table where you can have additional space to make more people sit, this plan could be ideal for you. The benches give you this option to allow a few more people to squeeze in. This table fits excellently in your contemporary space. This plan can be executed by any beginner, and you are also provided with square sized table and benches. 

This wood bench plan is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. My neighbor saw a cute wood bench at a local restaurant and wanted one for her house.  She snapped a few pics for me, … [Read more...]
*Please NOTE: While my table has held up well and had only a small amount of movement after 2 1/2 years, there are certainly things I would do differently with more experience under my belt. For beginners, I'd recommend using biscuits and glue for the top planks. Dowels or floating tenons/dominos are another option. Do make sure to let the wood properly dry.

If you are looking to make a large table for dining or celebrating ceremonies with many guests, the J-pedestal dining table can be a great choice. The design was inspired by a Pottery Barn. This gorgeous table adds class to your space which your guests will also praise. Though the materials can be purchased at affordable prices (costing around $125), you need to have good carpentry skills to make it and also the process is time-consuming. Southern Yellow Pine is recommended to use for the top because not only it is inexpensive but also it is strong and durable.

I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color.


This part is optional, but I like the little detail it adds.  I used a table saw to cut a line down the trimmed down 2×6.  I cut it about 1″ from the bottom.  I adjusted my table saw blade about 1/4″ high and ran it through, then adjusted slightly and ran it through again so that the groove was cut about 2 blade widths thick (slightly under 1/4″).  You could do this with a router instead if you wanted.
Per usual, I used pocket screws to fasten the table top together after applying glue to the edges.  Pic 3 shows the underside of the table.  A straight edge clamp and a circular saw were used to trim the ends of the top.  The blue masking tape helps limit splintering from the saw.  To see if the table was square, I compared the diagonal measurements across the table top.  Diagonal measurements on a square or rectangle should be equal if the piece is square on all corners.  It's not very critical on a rustic, distressed table since the table's charm comes from it's imperfections.
×