My own personal shop is a 20x20 section of my garage. Some people might argue that I've got plenty of space, but those people obviously feel their lives are complete without owning a panel saw. I'm not judging. I'm just saying that panel saws are awesome. And even with four-hundred square feet I need to find some creative storage solutions in the shop to accommodate my power tool addiction. There are plenty of people who have done a lot more with a lot less. Here are some of my favorite space saving workshop ideas.
This was not actually a tutorial post to the woodworking plan ideas but the aim of the post was to give some easy and free woodworking ideas to the readers. If you have some time to entertain yourself and also willing to add some new stuff to your furniture you can take any idea from the list and start working on it. Be sure to see both post tutorial and video tutorials of the plan you have selected, it will make you understand everything nicely.
Your earliest notes on woodworking will look much like notes from your first days at a new job: they're comprised of words you've heard, the lingo of a community and those in the know, that don't make any sense. Just as, at a new job, you will write a word like "Aditi?" and learn that it's a nickname that means "development server," so your first notes will be "biscuit joint?" and "joiner planer? planer joiner?"
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.

If you are looking for a simple design for making your farmhouse table where you can have additional space to make more people sit, this plan could be ideal for you. The benches give you this option to allow a few more people to squeeze in. This table fits excellently in your contemporary space. This plan can be executed by any beginner, and you are also provided with square sized table and benches.
Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.

If you are searching a very stylish gift for your friends who are females, then your search ends here, as I am sharing a leaf shape jewelry box that is the most stylish one. I am sure your friends would love to have it. They can keep their jewelry in this box. You would not need any other box for keeping your essential items. If you would give it as a gift, your friends would surely love to have it. I am sharing some of the pictures of this jewelry box, just have a look at these pictures.
Modifications: The only modifications I made to Ana's plans were to the overall size. I used an additional 2×10 to increase the width of the table. I cut the table top boards a little longer and enlarged the width of the table base. I show the table top modifications in drawings below. Feel free to modify your table from the plans to best suit your needs.
You’ll need to buy 4×4, 2×10, and 2×4 boards for this project. These boards can be found at your local lumber yard. Take your time to find quality boards that are straight and have little warp. First, I built the table top out of 2x10s. I used 5 2×10’s for the main part of the table and a 2×10 for each breadboard end. Ana’s plans call for four main boards, but I wanted a little larger area to spread out. I used a 12″ miter saw to make all of the cuts. I cut the 5 boards to 69 inches long.
Pegboard is the master of all workshop organizational tools. You can buy full sheets (4x8) at any big box store, but most also sell smaller, more manageable sheets. And while you can just slap these up on any wall, something like this fold-out wall cabinet will double your storage and keep your tools tucked safely away. You could also try this fancy sliding-door version.
So I thought this would be the perfect project to try out my new sprayer on and, I’m telling you, friends…LIFE CHANGING.  I mean, I’ll be honest, there is a learning curve to spray painting.  There were some spots that I got a little too much paint and spots I didn’t quite get enough the first couple coats.  But, even with my amateur skills, this still saved me hours of time and looked WAY better than if I had brush painted.
Nothing could be easier to accomplish than these rustic, personalized wood slice tree ornaments. After slicing a log into discs, screw in an eye hook, and thread with some jute twine for a hanger. Decorate with paint or metallic markers, or try the clever ink-jet-printer transfer technique that Upcycled Treasures used for the ornaments shown here. One log will make gifts for your entire extended family. 

9. Support the spindle with one hand as you cut icicle shapes. First turn a tenon at the tailstock end to fit the lower hole in the ball. Undercut the tenon’s shoulders so the icicle fits tight on the rounded bottom of the ball (Fig.A).Then turn the larger diameter cove, beads and fillets. Move downhill towards the headstock to cut the smallest diameters last. Apply a finish.

Whether your work area is a dedicated shop or a temporary cleared space in the basement or garage safety has to be the number one concern. A clean shop is a safe shop, spend a few minutes at the end of the day picking up and sweeping the floor. This not only cleans your surroundings, it also clears your mind, the solution to that problem you had earlier may suddenly appear.
You have no money, so you have dull IKEA knives in your kitchen right now that you don't even realize are dull, but you're going to learn that dull knives and tools can be more dangerous than sharp ones. You start changing your form to try to make them work better, when they really just need sharpening. Sign up for that sharpening class you're thinking of taking, stop being afraid to take tools apart to sharpen them thinking you won't be able to put them back together (especially the Lie Nielsen ones, but maybe just don't start with those), and do it. Learning how to properly remove rust and sharpen tools will be one of the skills you'll be most thankful for as time goes on, and it will also enable you to buy some inexpensive used tools at garage sales and make them sing. Speaking of sharpening...
Actually, you're going to have the opposite problem because you'll meet people who DO cheap out on tools and find they don't work all that well, wear down quickly, and don't last that long. You will want the best of best but not be able to afford them all the time. You will find, more often than not, that some very good tools are available in the mid-priced ranges: not the least expensive but not the most, either. For example, these two sets of chisels are not terribly expensive but well made and a great quality for the price: Marples and the beginner's set I got from Woodcraft that's Made in the USA. You can ask for the nicer ones for Christmas when people ask for ideas. It's good to think of tools as things that you buy once, where possible, but there are some deals to be had.
Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.
Through this project, you can convey a message for your love ones. You can make a whole name, a message or anything which you like most for conveying a message. You can make any kind of alphabet or numbers by using wood.All of you need a full command of handling woodworking project. You can give this frame to your love ones as a special gift for any occasion and the person who receives this will like itdefiantly. Basically, this concept is the mixture of art and creativity from wood. The creative mind can easily reach at the top level of woodworking project through a better way. You can see the full size of this image by following this link.

When finishing (staining) softwoods, you will get better results by "conditioning" the wood before using the stain. Softwoods are like sponges - irregular sponges - and will have areas that totally suck up stain (like end-grain) and other areas that don't take it well at all. This leads to a "blotchy" finish instead of a nice overall color. Conditioning solutions can be purchased or home-made - I've had good results with both - and they are definitely worth the time and effort. Remember: Few people notice a perfect finish - only the imperfect finish stands out ;)


I think this is one of the best feelings if you are successful in making wooden spoon by yourself without any trouble. You can create stylish and unique spoon at home. The only thing is that you just need to follow some steps for making a perfect spoon. In this video, you can see how simply the making of a spoon is and how much you need time for making is explained in this video.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools. Next to the radial arm saw and in the corner is the floor drill press with accessory storage next to it for all drilling operations.  Across from the radial arm saw is a separate workstation set up with a small portable table saw and router set-up with storage underneath for routers, bits and accessories. 

So, what is a warping board? It is a very basic frame (that can be joined together by any number of methods) with a bunch of pegs poking out of it. Weavers use it as a quick and easy way to measure out a great many pieces of string or yarn, all of the same length. These are then installed into the loom as the warp, hence the name warping board. It all sounds very simple, and looks that way too, unless you approach the design scientifically – my usual mistake.
This was not actually a tutorial post to the woodworking plan ideas but the aim of the post was to give some easy and free woodworking ideas to the readers. If you have some time to entertain yourself and also willing to add some new stuff to your furniture you can take any idea from the list and start working on it. Be sure to see both post tutorial and video tutorials of the plan you have selected, it will make you understand everything nicely.
This box is the fifth generation of this design. After each production run of about 20 boxes, I make slight design changes to enhance the look and simplify the machining. Any hardwoods would work, but since the box uses so little lumber, I prefer to incorporate highly figured woods. For safety, ease of construction and consistent cuts, I use a jig for bevel-cutting the legs and another jig for beveling the top surface of the lid.

All of our tables are available in the color and finish of your choice.  Our existing color pallet includes 90 paint colors,  multiple stain color options in each workshop collection and several wax color options for our reclaimed woods.  Please feel free to explore all of our paint and stain options to help guide your design plans.  All of paint and stain finishes include a durable water based clear top coat.  This makes it easier to keep the table top clean with a damp sponge (no chemicals!) and provides protection from water rings. (How to Clean a Wooden Dining Table) 
×