#00 Steel Wool and White Vinegar – Put a handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least a couple days. The mixture will get darker the longer you let it sit. Once diluted, simply paint the mixture on your piece. Oxidation will occur and the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all.
The first – and some say the most important choice in designing a dining table is size.  Since our tables are made-to-order we can offer a farmhouse table in any size, shape, style or color.  Do you need a 12 foot table, 72″ round pedestal table, a narrow 32″ wide trestle table, a 36″ high counter height table?  Large, long, narrow, small, square, round, oval tables.  All no problem.  We can make any of these and more.   Farmhouse tables are available as either new wood tables or old reclaimed wood.    
We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.
In regards to flattening the top, another technique would be take a pencil (soft lead) and lightly draw some big lazy squiggles across the top - enough so that there is a line every few inches. Then, use either a jointer plane or a belt sander to flatten the top until the squiggles are gone. The lines give you a reference to what is high and what is low - and when you are finished in a particular area. With the jointer plane, you want to stroke at about 45 degrees to the grain of the wood, and with a belt sander, you want to keep the sander flat on it's platen (don't let it tilt and dig in) and use wide, arcing, sideways sweeps with very light pressure - again at about 45 degrees to the grain of the wood - never let the sander start or stop when in contact with the surface. In both cases, finish with light sanding with either a belt sander, linear sander, or by hand, stroking in the direction of the grain. Palm sanders can leave swirls.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!

Scrollsaws are good for projects like cutting puzzles or silhouettes of cutesey animals out of wood. But for making furniture, scrollsaws just aren't up to the task. Scrollsaws, along with Dremel tools, do have their uses in crafts, but for woodworking, they are just a little too small. That said, Dremel tools are very useful for sharpening brad point drill bits, forstner bits, and bandsaw blades, so they do have a use in woodworking.


Liz, Great job on your new table and benches. They really look great. Love the chandelier also. Wanted to let you know that after I saw your tutorial on the board and batten in your living room and dining room, it really inspired me. I said to myself, “I can do that.” So, with that in mind, I am just finishing up board and batten in my laundry room. It was really an easy project and I love the results. It really perks up a drab old laundry room. I ended up doing all the work myself. The only help I asked my husband for, was with the nail gun, as we had to really get into some tight places. All in all, though, I am very pleased with it. Thanks for the idea.


Through this project, you can convey a message for your love ones. You can make a whole name, a message or anything which you like most for conveying a message. You can make any kind of alphabet or numbers by using wood.All of you need a full command of handling woodworking project. You can give this frame to your love ones as a special gift for any occasion and the person who receives this will like itdefiantly. Basically, this concept is the mixture of art and creativity from wood. The creative mind can easily reach at the top level of woodworking project through a better way. You can see the full size of this image by following this link.
*Please NOTE: While my table has held up well and had only a small amount of movement after 2 1/2 years, there are certainly things I would do differently with more experience under my belt. For beginners, I'd recommend using biscuits and glue for the top planks. Dowels or floating tenons/dominos are another option. Do make sure to let the wood properly dry.
It's nice to be on your site getting plans and building projects.  I was so inspired by you I went out and bought Ryobi tools, and have since built 3 projects all on http://www.Ana-White.com/ by you.  I loved building the Potting Table, and better yet my Mother loved it when I gave it to her as a gift.  I am now working on the Farm House style Table and Benches.  I can't wait to see how they turn out!  

How beautiful!!!! Your dining room looks so warm and inviting, the table is gorgeous! And I LOVE how you all signed it, it’s sweet little things like that that make a house a home! Thanks so much for the tutorial, we’ve been thinking about building a dining table too, I ant wait to show my husband your awesome tutorial! Hope there are lots of fun times and delicious meals in your dining room’s future 🙂


Though this farmhouse table is extremely basic in design, it has a modern twist with the seating which makes it very attractive. You can modify this table to be trendy or rustic as you prefer and as this design is simple, it is very easy to make. The table is large with the top measuring 51 3/4″ in width and 8’5″ in length. Also, the table is taller than a standard farmhouse table measuring 31″ from the ground. 

Just look at this small and cute helicopter that is made of wood. I am sure you would enjoy having it. Your kids would play with this. If you are giving gifts to your friend on the birthday of his/her child, then it is the best gift. I am sure your friend would admire this gift and their kids would just love having it. There are different colors of this helicopter. I am sharing some of the pictures of this helicopter. Have a look at these pictures and get an idea about it.


It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
Building a wine rack is usually a very common beginner's woodworking plan. Creating a wine rack is an easy plan that can most of the time be completed in a day or half, depending on how large and detailed you would like it to be. And the better news is that this free wine rack plan will let you build you a great looking wine rack for much less than it would cost.

A luminaria (often called luminary) is a traditional Mexican lantern made from a paper bag with sand and a candle inside. We’ve add some woodworking panache to these outdoor accents and build our luminarias from wood, with box joints and a star-shaped cutout. They’re beautiful — and reusable — ways to brighten patios, steps and walkways this holiday season.
To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
Keep in mind that always choose simple and easy step tutorial for making any kind of project. This brings beneficial for making a different project. For those how don’t know about how to make perfect jewelry tree are suggested to try something easy and simple tutorial. You can also make jewelry hanging from recycling things. It depends on your creative mind that what step you are choosing for making a perfect project.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
Chances are in any woodworking project, you’re going to have to connect two pieces of material. Screws are ideal for this – much better than nails – but there are hundreds of different types and sizes, all for different applications. We will review the most common types and applications so that you can quickly determine what type you will need for your project and how to use it.

Jigsaws have a reciprocating blade, and are a great do-it-all saw which we use them quite often on our projects. They excel at making oddly shaped cuts and curves, but aren’t so great if you need perfectly straight cuts. Another advantage to jigsaws is that the blades are small, cheap, and interchangeable so that you can quickly swap between cutting different materials.


Creativity through woodworking brings the best combination of DIY wooden Art. Any shape can easily make through the following simple steps. Keep that thing in mind that you need enough space for writing a message in this project. I just love this concept because of more beautiful work more chance of people attraction. In this video you can see the message for the whole family or choose for your friends also. For more detail check this video.
If you are searching a very stylish gift for your friends who are females, then your search ends here, as I am sharing a leaf shape jewelry box that is the most stylish one. I am sure your friends would love to have it. They can keep their jewelry in this box. You would not need any other box for keeping your essential items. If you would give it as a gift, your friends would surely love to have it. I am sharing some of the pictures of this jewelry box, just have a look at these pictures. 

I can't really make good recommendations as to what specific brands of tools are better than others. Most of my tools were opportunistic purchases, with relatively little regard to specific brands. More often than not, it's price and a quick inspection to gauge the solidity of the tool that are the determining factors. My tools are usually not among the best that can be had, but good enough.
We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.
8. Size a tenon on the cap piece to fit the ball’s hole. Undercut its shoulders, too. The cap piece, as shown here, is glued into a shallow hole turned into the face of a waste block. Shape the cap, then part it off the waste block. To clean up the tip, reverse the cap and push the tenon into a new hole in the waste block. Finish the cap on the lathe, then remove it and drill a small, shallow hole for the hanging wire.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
Though this farmhouse table is extremely basic in design, it has a modern twist with the seating which makes it very attractive. You can modify this table to be trendy or rustic as you prefer and as this design is simple, it is very easy to make. The table is large with the top measuring 51 3/4″ in width and 8’5″ in length. Also, the table is taller than a standard farmhouse table measuring 31″ from the ground.
Our tables are available in any base design including a variety of leg, single pedestal, double pedestal and trestle designs.  When considering what type of table base you want, it is important to consider both look and functionality.  Leg style bases (tapered, square, turned or curved) provide the traditional farmhouse table look and are the most economical option.  Single pedestals work well with round and square tables.  Double pedestal and trestle tables are great for longer tables and tight seating requirements.
The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here
Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
×