Sometimes Grandparents can be hard to buy gifts for, they seem to have everything already. But hey you can't go wrong with darling gifts of grand kids, right!?! In this post I'm going to share a couple of ideas for personalized photo gifts. To make the photo gifts, I will be using Photoshop Elements 2018. I have been using Photoshop Elements ever since I graduated from trying … [Read more...]
9. Support the spindle with one hand as you cut icicle shapes. First turn a tenon at the tailstock end to fit the lower hole in the ball. Undercut the tenon’s shoulders so the icicle fits tight on the rounded bottom of the ball (Fig.A).Then turn the larger diameter cove, beads and fillets. Move downhill towards the headstock to cut the smallest diameters last. Apply a finish.
The article explains step by step process for making this awesome piece of wooden art. You need are a few pieces of wooden planks, a saw, screws and plates. I must remind you here that a bit of woodworking skill are needed here too. This DIY project is fun and good sport at the same time. It is as easy on the eyes as it is to build one. If you don’t fancy written instructions, a wide variety of videos on the internet are available to help you understand its making.You can easily make the baby cots by joining equal size wooden strips in a specific manner.
You can also make wonderful variety of wooden boxes easily at home. It is actually very stress-free and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and stimulating work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these wooden boxes by joining equal size wooden pieces of square shapes. You can also do easily.
Creativity through woodworking brings the best combination of DIY wooden Art. Any shape can easily make through the following simple steps. Keep that thing in mind that you need enough space for writing a message in this project. I just love this concept because of more beautiful work more chance of people attraction. In this video you can see the message for the whole family or choose for your friends also. For more detail check this video.
During the late Victorian era, wooden items for decoration started to attain popularity. Wood is having a significant role in our life. These wooden items give a classy look to your interior furnishing as well as carry different items. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work.. It is actually very easy and interesting to make. Size, shape, design and number of compartments are according to your choice when you made it.
As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.The final piece looks like the one in the image. It is absolutely loveable. The design, color and looks can also be modified to suit the surrounding area.
Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts.
Drilling holes sounds pretty simple, and it is! There’s a few tricks though that will help you drill better holes and get more use from your drill. The video below includes tips like catching dust, making guides for drill holes, making sure you drill to the right depth every time, and creating pilot holes. Armed with these tips, your holes should be more consistent in depth, make less mess, and always be in the right place.
Cordless tools are very handy, and I love my cordless drills. However, if you are just dabbling with getting into woodworking, and you may only use your tools every six months, you may find the litium batteries dying prematurely. Litium batteries slowly self-discharge, and once fully discharged, they are permanently damaged. So if, for example, you use a cordless drill until the battery is low, put it away without recharging, and try to charge it again months later, you may find the battery no longer able to take a charge. 

Basically, as you beginner you will need the following tools: a drill, an impact driver, a miter saw and a sander. With these tools you can cut, join and finish wood as a professional. If you want to save time and improve the quality of your work you can upgrade and buy yourself a pocket hole jig, a router, a thickness planer and a table saw. I have created a complete guide with tool recommendations and reviews HERE, so you make an informed decision.
Some friends of ours have been wanting a DIY farmhouse table for some time now. After hearing about their shopping trip and the prices they were looking at spending on one I felt obligated to step in and make this one of my next DIY projects. My buddy Jake has no experience with power tools whatsoever, bless his heart. So, you’re in for a special treat with this one as you will get to see Jake build this table from scratch with no power tool experience! With a little guidance from me of course.
If you want to get into woodworking, a good project to tackle is building your own workbench. It's really not that hard. So if building your own workbench is a bit too much work, or too intimidating, then take a step back and examine whether you really want to get into woodworking. This may be different if your goal is to cut silhouettes of kittens out of plywood with a scrollsaw, but I wouldn't call that sort of activity "woodworking".
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!

Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many
Methods for skinning a cat have nothing on ways to build a bench. Explore different joinery methods and work with those that you are able to complete the best. Don't overcomplicate something when it doesn't need to be. There's a reason tools have improved, glue has gotten better, fasteners stronger, and new joinery methods have been introduced. A lot of the time the focus in woodworking is on finding shortcuts to get the same or better results. Don't let joinery snobs influence you.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
Not at all! I meant to put the total cost in the post, so thank you for reminding me! The wood totaled around $50 for the table and $34 for both benches. We spent another $25 or so on screws and miscellaneous tools, so for about $110, I’d say that’s not too bad!! It took my husband and I a couple hours to build the table, another couple hours to build the benches, and about 2 days to sand, distress, stain, and seal everything.
Disclaimer: Although it is my intention to provide accurate plans and clear instructions, not all plans have been tried and tested. Using plans or information found on SawdustGirl.com indicates that you agree with the Terms of Use policy and will accept full responsibility for the process and outcome of any project you attempt. All plans are for private use only. Plans and information published on SawdustGirl.com may not be reproduced, republished or distributed in any manner without written permission from Sandra Powell, Sawdust Girl. Actual projects built using Sawdust Girl plans may be published on your own site without instructions or "tutorial" as long as you provide a link to my original post with full post title or "SawdustGirl.com" as link title.

So many ideas are included in this website, just waiting for you to build memories with inexpensive wood projects. You will find a variety including outdoor projects, furniture plans, household accessories, craft fair items and workshop furnishings.  There is also a host of projects suitable for a beginner. Build one of these great projects this weekend!
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!

Since this 130 year old wood is painted on one surface I wanted to make sure it was sealed on all sides.  This old paint most likely contains lead.  It is always a good idea to seal both surfaces of a table top anyway to minimize warping from different rates of expansion and contraction.  Prior to sealing the top, it was sanded with 100, 150 and 220 grit sandpaper.  Two coats of Bullseye sealing shellac were applied to the top and bottom of the table top.  Two coats of Bullseye amber shellac and one coat of Bullseye clear shellac was applied to the table top after sealing.  Two coats of clear Briwax was rubbed into the top and buffed out for the final shine.


To inset the aprons 3/4" from the outer surface of the legs I made a spacer from 2 pieces of plywood.  This little jig made it easy to keep the distances uniform and also secure the apron to the leg while fastening.  Pic 3 illustrates how the jig, apron and leg are clamped together for fastening.  Each apron end is held by three 2 1/2" pocket screws.  The pocket holes were made using a Kreg pocket hole jig.  I assembled the short ends first and then the rest of the table base making sure the kerf (for clips) was along the top edge.  Since this is a long table I also added a cross piece in the middle of the table using pocket screws.

With a little wood glue and imagination, painted 2”x2” wood pieces are topped with wooden balls and then dressed with fabric and a twig shepherd’s hook. A smaller wood block, peg, and fabric make the manger in this craft from The 36th Avenue. Place inside a paper-lined crate graced with a craft paper star, and the true meaning of Christmas will quickly come to life.


As you can see in the image, this beautiful heart shaped wall hanging wooden piece on the wall. It looks beautiful and can be used to surprise someone special. The shape and design of this wooden hanging depend on how properly you build it. First time workers definitely need some guidance to help them with the process. You can choose the wood type, color and design as you like for your project. You can easily make it at home by using some artthings. You can decorate your wall hangings with different materials, designs and styles. I am actually making one of this wooden heart shaped hanging in my home. It is perfectly cool and artistic work. These hangings may be adjustable or a fixed.


Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8's. Everything else was kept the same as Ana's plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
In the parties you always need a candle stand for enhancing your decoration. This candle stand is a very stylish one and it always adds beauty to your lounge. In the washroom, you also need some candles while having a bath. In the washroom, you can keep this candle stand on one side. The soothing effect would increase by these candles and this candle stand is really a marvelous one as it is made in a stylish way. You can create it very easily and can give it to your friend as a gift. Let’s have a look at the pictures which I am sharing with you.
Two children who visit me several times each summer are very fond of trains, both riding on them and playing with them, so I came up with this design. It is not meant to be an authentic model in any way. It is just for the children to play with. The engine and cars feature dovetail joinery details. When someone mentions the words “dovetail joint,” my mind automatically conjures up boxes. A dovetail jig is one of the best ways to make dovetail joint boxes, but a dovetail jig can actually be used to join any two pieces of material together at right angles. This may well be on a box, but it could also be a drawer or, as in this case, parts for a toy train.

Through this project, you can convey a message for your love ones. You can make a whole name, a message or anything which you like most for conveying a message. You can make any kind of alphabet or numbers by using wood.All of you need a full command of handling woodworking project. You can give this frame to your love ones as a special gift for any occasion and the person who receives this will like itdefiantly. Basically, this concept is the mixture of art and creativity from wood. The creative mind can easily reach at the top level of woodworking project through a better way. You can see the full size of this image by following this link.
Douglas fir from home improvement centers will almost always warp when you try to make a flat top. It is never dried to the same extent as hardwood and ships out for the purpose of being used as framing lumber, not furniture lumber. That said, you can do it, but buy it and let it sit in your garage for a few months or longer to let it further dry and acclimate to your environment. Even better if you plane it down after that waiting period, then allowing it to acclimate for another week or so to make it works out all of its twists prior to being turned into a top. Do you have any hardwood dealers in your area? Try visiting one and make an investment in your table...buy some good maple (soft maple is worlds harder than new douglas fir - you don't need hard maple, ie:or sugar/rock maple).
I have been involved one way or another with woodworking for the last six decades, it began when I was about ten years old, my father built me a jigsaw by modifying an old Briggs and Stratton engine. Looking back I don't believe it cost him anything more than the price of a few welding rods to give me hours of entertainment cutting doodads out of apple box wood. The last three have been limited due to health reasons but I still do small projects when necessary.
At Cottage Home, we know purchasing custom furniture and décor on the Internet can raise some concerns and questions. Our business is dedicated to pioneering a new process for providing high-quality made-to-order furniture on the Internet. We strive to make it as easy as possible for our customers to have access to custom bench-built products for their homes.
A nice thing about a bandsaw is that it's not scary to use. Sure, a bandsaw can cut your fingers off too, but it will probably cut your finger slow enough that you can pull it back before it's a major injury. I cut into my thumb with a bandsaw once when I was a kid. I pulled back as soon as I felt it, and the cut on my thumb wasn't even deep enough to warrant a band-aid. So if table saws scare you, get a bandsaw first.
×