If you're dreaming of a white Christmas, prep your home with this practical and pleasing boot rack. Blogger Stephanie Lynn constructed this fixture from stock lumber and 2-inch dowels to keep the slush and mud outside the house, where they belong. Glue down the dowels, or leave them dry-fitted so you can disassemble and store the rack easily during the summer months.
Hardwood boards and softwoods may look similar in shape and dimension, but they are sold using completely different measuring systems. Softwoods are typically sold in standard lumber dimensions (such as a 2x4), whereas hardwoods are most often sold by the board foot. Calculating board feet helps you guarantee that you're getting your money's worth on every piece of hardwood you purchase.
Building a bookcase or bookshelf is a fairly simple woodworking plan that you can get done in just a day or two. This is also a low-cost project as well and since the project idea is free, you don't have to worry about busting through your budget. Just follow the simple steps in the tutorial and enjoy your own company building a simple bookcase on this weekend.
Doing fine. I don't expect the pocket screws to fail or loosen over a typical period of time. They make a very solid joint especially if you also glue the joint. Compared to mortise and tenon a pocket screw will fail sooner under severe stress, however they are easier to repair than M&T which blow out. So I expect long use from this table unless a bunch of heavy people start dancing on it and the old wood will probably break first.
This video shows the making of wooden hanging with one of the easiest ways. I make this wooden stylish wooden hanging at home easily and decorate with the variety things that give fabulous look to my room. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps. It is actually very easy and interesting to make. Size, shape and design is according to your choice when you made it. 

Disclaimer: Almost any DIY project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Rogue Engineer has made every effort to be complete and accurate in the instructions provided on this website. Rogue Engineer will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer's operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.
I have been involved one way or another with woodworking for the last six decades, it began when I was about ten years old, my father built me a jigsaw by modifying an old Briggs and Stratton engine. Looking back I don't believe it cost him anything more than the price of a few welding rods to give me hours of entertainment cutting doodads out of apple box wood. The last three have been limited due to health reasons but I still do small projects when necessary.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
Hand saws are a good option for making quick cuts that don’t need to be perfectly straight. They do take some muscle as they are non-powered, but are perfect for a quick job. The downside to hand-saws is you will need a different saw for each type of material you need to cut, so if you’re trying to cut wood and sheet metal, that’s an additional cost.
Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools. Next to the radial arm saw and in the corner is the floor drill press with accessory storage next to it for all drilling operations.  Across from the radial arm saw is a separate workstation set up with a small portable table saw and router set-up with storage underneath for routers, bits and accessories.
The shop you see in the layout is my current setup and has evolved over many years to accommodate most importantly the acquisition of newer equipment but also better work flow. It is a free standing two story traditional barn style with office and storage space on the second level. Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools.
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.

You can also make wonderful variety of wooden boxes easily at home. It is actually very stress-free and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and stimulating work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these wooden boxes by joining equal size wooden pieces of square shapes. You can also do easily.


Hand saws are a good option for making quick cuts that don’t need to be perfectly straight. They do take some muscle as they are non-powered, but are perfect for a quick job. The downside to hand-saws is you will need a different saw for each type of material you need to cut, so if you’re trying to cut wood and sheet metal, that’s an additional cost.
To inset the aprons 3/4" from the outer surface of the legs I made a spacer from 2 pieces of plywood.  This little jig made it easy to keep the distances uniform and also secure the apron to the leg while fastening.  Pic 3 illustrates how the jig, apron and leg are clamped together for fastening.  Each apron end is held by three 2 1/2" pocket screws.  The pocket holes were made using a Kreg pocket hole jig.  I assembled the short ends first and then the rest of the table base making sure the kerf (for clips) was along the top edge.  Since this is a long table I also added a cross piece in the middle of the table using pocket screws.
×