Creating custom picture frames for friends and family is a great gift giving project that's sure to please even those difficult to shop for gift recipients. Everyone has a special photo or keepsake they've meant to have framed. Making a custom frame to match may be the best gift of the season. Best of all, it's a quick and simple project to complete with the right tools and set up. 

To start, make a base assembly out of the aprons, legs, and stretchers. Attach one leg on either side of one of the short aprons. Bore two holes for pocket screws into each side of the apron's back, four in total (fig. 1). Clamp the legs to the apron, but add a ⅛-inch piece of wood to the front as a spacer (fig. 2). This will offset the face of the apron from the face of the leg, pushing it back a bit and creating a nice dimensionality. Drive the pocket screws through the apron into the leg. Repeat the same procedure for the second leg–apron assembly.

Drawing inspiration from a round trestle table that was worth $3350, Rogue Engineer came up with their free DIY plan to make the table cheaper. Unexpectedly, you can make this excellent table for around $40. You may think that round tables are difficult to build, but if you have the proper tools and follow the instructions carefully as provided, you can actually make this table with ease. 

A nice thing about a bandsaw is that it's not scary to use. Sure, a bandsaw can cut your fingers off too, but it will probably cut your finger slow enough that you can pull it back before it's a major injury. I cut into my thumb with a bandsaw once when I was a kid. I pulled back as soon as I felt it, and the cut on my thumb wasn't even deep enough to warrant a band-aid. So if table saws scare you, get a bandsaw first.
Cordless tools are very handy, and I love my cordless drills. However, if you are just dabbling with getting into woodworking, and you may only use your tools every six months, you may find the litium batteries dying prematurely. Litium batteries slowly self-discharge, and once fully discharged, they are permanently damaged. So if, for example, you use a cordless drill until the battery is low, put it away without recharging, and try to charge it again months later, you may find the battery no longer able to take a charge.

Don't believe the mainstream thinking that hand tools are irrelevant, too slow to be useful, or less effective than power tools. Ignore, or at least take with a grain of salt, the power tool devotees who will say "There's a reason they invented power tools, ya know!" Your "shop" is a bench attached to the inside of a coat-closet door in a one-room studio apartment right now. Power tools are going to bother that nice med student next door, and that closet shop doesn't have any ventilation for the amount of dust you'll produce. Hand tools can be more efficient (in speed, quick access, storage, and lack of set up), they're quieter, and the pleasure of silence afforded by quiet hand tools--just a few soft noises produced by your tools--is a pleasure not to be overlooked. They're portable and will move with you, you'll learn more about how different types of wood behave, and, when you run into one of those power tool zealots, just go over to Todd's house and watch a few episodes of The Woodwright's Shop to get your respect for hand tools back in check.

Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.
If you are searching a very stylish gift for your friends who are females, then your search ends here, as I am sharing a leaf shape jewelry box that is the most stylish one. I am sure your friends would love to have it. They can keep their jewelry in this box. You would not need any other box for keeping your essential items. If you would give it as a gift, your friends would surely love to have it. I am sharing some of the pictures of this jewelry box, just have a look at these pictures. 

Building a Wooden baby cot is an easy task for a professional woodworker, but not so much for normal people like you and me. But that doesn’t mean you cannot do this. Two years ago, I had almost no woodworking experience, but now I make most of my household and baby cot by myself. This creativity saves a lot of money. And believe me when I say this; you can also manage to make wonderful wooden items with a little practice and some woodworking experience. This baby cot can also be made in different sizes and shapes as you can find on the internet.

I keep looking for a printable version of both your table and benches. I can’t seem to find them. I am hoping that you can email them to me – I want my brother-in-law to help me make the table and benches. If you don’t have the plans do you recommend I just copy and paste your information off into word or something. Thanks so much for your help – this is exactly what I have been looking for!
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of

The router might just be the most versatile woodworking power tool there is and it's a great first tool for beginner woodworkers. When set up properly and safely handled, a router can do everything from cutting joinery to shaping parts. Just be sure you understand the basic safety procedures and read the tool's manual if you're new to using a router.


With a little wood glue and imagination, painted 2”x2” wood pieces are topped with wooden balls and then dressed with fabric and a twig shepherd’s hook. A smaller wood block, peg, and fabric make the manger in this craft from The 36th Avenue. Place inside a paper-lined crate graced with a craft paper star, and the true meaning of Christmas will quickly come to life.

The blade on a block plane, (click to enlarge drawing) commonly referred to as a plane iron, is mounted with the bevel side up to produce a cutting angle of about 37 degrees in a standard plane and 25 degrees in a low-angle plane. Some block planes feature an adjustable mouth, which allows the plane to be tuned for different cuts; Close the mouth and lower the blade for finish cuts or open the mouth and extend the blade for thicker rough cuts.
The table top was then sealed with multiple coats of Varathane for protection.   We chose not to add a stain to the top because its natural coloring is gorgeous already.  There are shades of browns and grays in the wood along with saw marks from the original milling, knots, and grooves that you would come to expect from a reclaimed barn wood table.

The blade on a block plane, (click to enlarge drawing) commonly referred to as a plane iron, is mounted with the bevel side up to produce a cutting angle of about 37 degrees in a standard plane and 25 degrees in a low-angle plane. Some block planes feature an adjustable mouth, which allows the plane to be tuned for different cuts; Close the mouth and lower the blade for finish cuts or open the mouth and extend the blade for thicker rough cuts.


Build your own platform bed frame at your home by following the source linked tutorial given above. The source link also includes more pictures that can help you to build a better bed frame. You can see a step by step set of instructions and guidelines to follow with real life pictures, as well as you can download a PDF file detailing the list of materials and tools you’ll need, know about the length of every board, and most importantly color-coded illustrations of the building process.
With a little woodworking knowledge and use of some basic items, you can build a wonderful tissue box holder of your own. You can easily build them in bulk and then sell at good rates. Although easy, a wooden tissue box is an equally important and useful item for households. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. These wooden items give a classy look to your interior furnishing. This is the easiest way to spice up your tables with beautiful wooden tissue boxes. By doing this you can give style to your table settings.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!
Per usual, I used pocket screws to fasten the table top together after applying glue to the edges.  Pic 3 shows the underside of the table.  A straight edge clamp and a circular saw were used to trim the ends of the top.  The blue masking tape helps limit splintering from the saw.  To see if the table was square, I compared the diagonal measurements across the table top.  Diagonal measurements on a square or rectangle should be equal if the piece is square on all corners.  It's not very critical on a rustic, distressed table since the table's charm comes from it's imperfections.
I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color.
This plan is probably the easiest plan ever added in the list. The one who is working on this project, don’t need any professional skills but just knowing some basics of woodworking will be enough for this DIY. You will get step by step detailed process of this tutorial in the source linked tutorial. This tutorial will surely help you to build this plan quickly. 
×