A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
Just check out this enticing and legant mirror that portray woodworking art finely blended with creativity. You can have it on the wall, especially in the lobby it looks great. It enhances the looks of your dinning room and your drawing room. I just found this over the interent and people are highly admired by this design. So, lets have a look at its image, you will get guidance on making it.
This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.
If you’re looking to show off you’re woodworking skills and you have a piece of wood with a beautiful linear grain pattern, then this box project is a great choice. It’s a more refined box design, and as you might expect, it’s a little more challenging to build than the simple keepsake box presented earlier on this gift list. The sides are constructed so that the wood grain flows smoothly across one face, around the corner and into the adjoining face — and all the way around the box without a break — the grain itself becomes a major part of the design. The design is also enhanced by tapering the box sides, allowing the eye to more easily take in the continuous run of grain at the corners.
To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
This part is optional, but I like the little detail it adds.  I used a table saw to cut a line down the trimmed down 2×6.  I cut it about 1″ from the bottom.  I adjusted my table saw blade about 1/4″ high and ran it through, then adjusted slightly and ran it through again so that the groove was cut about 2 blade widths thick (slightly under 1/4″).  You could do this with a router instead if you wanted.
When you move to California, Sam Maloof and James Krenov will still be alive. You will delay plans to visit both of them, and they will die within a few months of one another and you will never get the chance to meet them in person. Go, go, go. Meet these rare gems of woodworkers while you can - and view all of your elder woodworkers this way. People don't live forever. This also applies to your grandparents.

I keep looking for a printable version of both your table and benches. I can’t seem to find them. I am hoping that you can email them to me – I want my brother-in-law to help me make the table and benches. If you don’t have the plans do you recommend I just copy and paste your information off into word or something. Thanks so much for your help – this is exactly what I have been looking for!
Hi Nancy! I only looked specifically for rectangular tables – sorry!! I do know the blog Little Red Brick House made a round farmhouse table but I couldn’t find instructions for it. Maybe reach out to her and she could give you more details? Here’s the link to her post: http://littleredbrickhouse.com/industrial-farmhouse-dining-room-makeover-one-room-challenge-reveal/ Thanks for stopping by!

All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8’s. Everything else was kept the same as Ana’s plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
This plan is probably the easiest plan ever added in the list. The one who is working on this project, don’t need any professional skills but just knowing some basics of woodworking will be enough for this DIY. You will get step by step detailed process of this tutorial in the source linked tutorial. This tutorial will surely help you to build this plan quickly.
#00 Steel Wool and White Vinegar – Put a handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least a couple days. The mixture will get darker the longer you let it sit. Once diluted, simply paint the mixture on your piece. Oxidation will occur and the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all.
Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
This woodshop photo is the outdoor Florida woodshop of Woodworking Guide Chris Baylor. This woodshop photo shows a portable miter saw stand, temporary shop table consisting of a pair of sawhorses with plywood as a table top, a contractor table saw and band saw on portable bases, and an Adirondack loveseat glider rocker that is a current woodworking project in progress.
Your earliest notes on woodworking will look much like notes from your first days at a new job: they're comprised of words you've heard, the lingo of a community and those in the know, that don't make any sense. Just as, at a new job, you will write a word like "Aditi?" and learn that it's a nickname that means "development server," so your first notes will be "biscuit joint?" and "joiner planer? planer joiner?"
Now you have the knowledge of creating your dream farmhouse table of your choice. With 53 DIY Farmhouse Table Plans, consider choosing anyone which you like. Even if you are not an expert at carpentry, you can select from the simple designs that are equally stylish. If you are great at woodworking, you can consider the projects which require some expertise.

Your earliest notes on woodworking will look much like notes from your first days at a new job: they're comprised of words you've heard, the lingo of a community and those in the know, that don't make any sense. Just as, at a new job, you will write a word like "Aditi?" and learn that it's a nickname that means "development server," so your first notes will be "biscuit joint?" and "joiner planer? planer joiner?"
Hand saws are a good option for making quick cuts that don’t need to be perfectly straight. They do take some muscle as they are non-powered, but are perfect for a quick job. The downside to hand-saws is you will need a different saw for each type of material you need to cut, so if you’re trying to cut wood and sheet metal, that’s an additional cost.
I think this is one of the best feelings if you are successful in making wooden spoon by yourself without any trouble. You can create stylish and unique spoon at home. The only thing is that you just need to follow some steps for making a perfect spoon. In this video, you can see how simply the making of a spoon is and how much you need time for making is explained in this video.

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors. 

This wooden sofa side table can also be made in different sizes and shapes as you can find on the internet. Some of the items you will need for this project are wooden pieces, cutter, screws, etc. We have included a video tutorial here that illustrates the process of building a wooden sofa side table. This is not the exact one that you see in the image above, but it can be modified to build any shape or design you want. The video tutorial also has English subtitles to make it easy for anyone to understand and follow the steps.


It's nice to be on your site getting plans and building projects.  I was so inspired by you I went out and bought Ryobi tools, and have since built 3 projects all on http://www.Ana-White.com/ by you.  I loved building the Potting Table, and better yet my Mother loved it when I gave it to her as a gift.  I am now working on the Farm House style Table and Benches.  I can't wait to see how they turn out!  
As you can see in the image, this beautiful heart shaped wall hanging wooden piece on the wall. It looks beautiful and can be used to surprise someone special. The shape and design of this wooden hanging depend on how properly you build it. First time workers definitely need some guidance to help them with the process. You can choose the wood type, color and design as you like for your project. You can easily make it at home by using some artthings. You can decorate your wall hangings with different materials, designs and styles. I am actually making one of this wooden heart shaped hanging in my home. It is perfectly cool and artistic work. These hangings may be adjustable or a fixed.
If you have a small space in your kitchen or living space but require a table for dining or if you are fascinated with roundtable designs, you can consider this free DIY plan form Lane Home Co. to be a great option. Not only this table looks nice but also it is very sturdy with layered centered cross base in a V-shape. You might feel the table is difficult to make, but if you have the right tools and carefully follow the instructions, you will be able to accomplish the task easily.
If you are searching a very stylish gift for your friends who are females, then your search ends here, as I am sharing a leaf shape jewelry box that is the most stylish one. I am sure your friends would love to have it. They can keep their jewelry in this box. You would not need any other box for keeping your essential items. If you would give it as a gift, your friends would surely love to have it. I am sharing some of the pictures of this jewelry box, just have a look at these pictures.
Just look at this small and cute helicopter that is made of wood. I am sure you would enjoy having it. Your kids would play with this. If you are giving gifts to your friend on the birthday of his/her child, then it is the best gift. I am sure your friend would admire this gift and their kids would just love having it. There are different colors of this helicopter. I am sharing some of the pictures of this helicopter. Have a look at these pictures and get an idea about it.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Creating custom picture frames for friends and family is a great gift giving project that's sure to please even those difficult to shop for gift recipients. Everyone has a special photo or keepsake they've meant to have framed. Making a custom frame to match may be the best gift of the season. Best of all, it's a quick and simple project to complete with the right tools and set up.
So, this is the entire list of items, you can have a look at these items in detail. I am sure you have enjoyed this list of items. Let us inform with your views and comments. We are waiting for them. If you have any friends and family members, share this list with them too. You can also share these items on the social sites. If you have any query you are free to ask from us. We are ready to help you. So, what are you waiting for. Just start making your projects and be confident.
I wanted to make more elegant jewelry tree that’s the reason I search on YouTube for a different tutorial of the jewelry hanging tree. If you are facing trouble in making jewelry hanging tree from the wood you need to try first simple one. In this link, you can see how you make this tree? And what kind of jewelry you can hang on this tree. Must watch this link so you can try easy one 

In regards to your breadboard ends: You might be able to get away with what you did depending on how dramatic the humidity difference between seasons is in your area, but in the future, you might want to elongate your dowel holes in the tongue of the joint - all but the center hole. Specifically, you want to put a pin in the center of the table end (no hole elongation) and then elongate the holes on either side - maybe 1/16" to each side of center (it's OK to glue the center like you did). This allows the center pin to keep the board centered (duh) and then allows the table top to grow and shrink across it's width without putting undue stress on the breadboard ends. This is important because wood expands/contracts across it's grain significantly more than it does along it's length, so when you have a joint where end grain meets side grain (as in your breadboard ends) NOT taking this into account can mean that your project disassembles itself - or at least becomes "rickety" as the expansion/contraction cycle loosens the joint. The amount of growth you can expect is determined by wood species, initial moisture content of the wood, and humidity change across seasons. There are online references you can check to see how much you would want to elongate those holes.

Nothing could be easier to accomplish than these rustic, personalized wood slice tree ornaments. After slicing a log into discs, screw in an eye hook, and thread with some jute twine for a hanger. Decorate with paint or metallic markers, or try the clever ink-jet-printer transfer technique that Upcycled Treasures used for the ornaments shown here. One log will make gifts for your entire extended family.
So I thought this would be the perfect project to try out my new sprayer on and, I’m telling you, friends…LIFE CHANGING.  I mean, I’ll be honest, there is a learning curve to spray painting.  There were some spots that I got a little too much paint and spots I didn’t quite get enough the first couple coats.  But, even with my amateur skills, this still saved me hours of time and looked WAY better than if I had brush painted.

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
×