Pegboard is the master of all workshop organizational tools. You can buy full sheets (4x8) at any big box store, but most also sell smaller, more manageable sheets. And while you can just slap these up on any wall, something like this fold-out wall cabinet will double your storage and keep your tools tucked safely away. You could also try this fancy sliding-door version.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!

The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details on internet. Follow the steps properly to make a nice and strong wall wooden hanging. This wooden piece makes wooden clips to hold decorative items. The tutorial explains the procedure for building this beautiful wall hanging. Make sure to use only high quality items for any woodworking project.

Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
The article explains step by step process for making this awesome piece of wooden art. You need are a few pieces of wooden planks, a saw, screws and plates. I must remind you here that a bit of woodworking skill are needed here too. This DIY project is fun and good sport at the same time. It is as easy on the eyes as it is to build one. If you don’t fancy written instructions, a wide variety of videos on the internet are available to help you understand its making.You can easily make the baby cots by joining equal size wooden strips in a specific manner.
With a little woodworking knowledge and use of some basic items, you can build a wonderful tissue box holder of your own. You can easily build them in bulk and then sell at good rates. Although easy, a wooden tissue box is an equally important and useful item for households. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. These wooden items give a classy look to your interior furnishing. This is the easiest way to spice up your tables with beautiful wooden tissue boxes. By doing this you can give style to your table settings.
So, what is a warping board? It is a very basic frame (that can be joined together by any number of methods) with a bunch of pegs poking out of it. Weavers use it as a quick and easy way to measure out a great many pieces of string or yarn, all of the same length. These are then installed into the loom as the warp, hence the name warping board. It all sounds very simple, and looks that way too, unless you approach the design scientifically – my usual mistake.
Nightstand table plans have everything you need to create a bedside table to keep every needy thing at reach at night time. This Nigh Stand plan is quite different in design from the most of the other plans. This stand has not only the three regular drawers but also having a hidden drawer that uses a secret locking mechanism to keep contents securely.
This plan is probably the easiest plan ever added in the list. The one who is working on this project, don’t need any professional skills but just knowing some basics of woodworking will be enough for this DIY. You will get step by step detailed process of this tutorial in the source linked tutorial. This tutorial will surely help you to build this plan quickly.
Choose a light-colored wood with interesting grain for the ball. It should be one solid piece, 2 1⁄2- to 3-in. square. I like to make more than one ornament at a time, so I use a rough blank about 8-in. long in order to make two balls. Make the cap and icicle from a contrasting dark wood that takes fine details. I like to use rosewood or ebony. You’ll need a piece that’s 1-in. square and 8-in. long.
If you like a large octagon table instead of a simple round table, you can consider this free DIY plan from Ana White. This table features truss supports and pedestal base which makes it extremely durable and stable. The look might unnerve you because of the angle cuts, but you can easily get this task accomplished with the right tools. The entire list of the tools and materials required are provided. Also, the instructions are very easy to follow with illustrations included. The table has the capacity for seating six people, and it can be manufactured with a budget of around $110.
Copyright 2018, Sarah Pawlak. Feel free to share what you see here but please only share one image with a link back to my page. It is not permissible to copy anything else on my site without first getting written permission from me. All printables are for personal use only. Sponsored posts always include my own thoughts and are never written by the sponsors. Affiliate links may be used at times. Pinning is always appreciated!! Thank you!

Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.


To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
×