Have you ever seen a knife made of wood? It is only for decoration purpose, but it can be a great gift. I hope you would like this. You can give this knife as a gift to your fellows and it is very amazing that this knife is also sharp. Give this knife as a gift and they would surely like it. I am sharing some pictures of this knife and I hope that you would like them. Just have a look at the pictures.

Doing fine. I don't expect the pocket screws to fail or loosen over a typical period of time. They make a very solid joint especially if you also glue the joint. Compared to mortise and tenon a pocket screw will fail sooner under severe stress, however they are easier to repair than M&T which blow out. So I expect long use from this table unless a bunch of heavy people start dancing on it and the old wood will probably break first.
Wow, this is really big rolling dice and the special thing of this dice is that it is made from wood. I think wooden dice are durable dice. This is one of the best decorations I have ever found. The main question is that why it is so special for me? Basically, I am a game lover and I have made this wooden dice for the decoration of home. The size of this dice is large instead of normal games dice. This is really special project for me that am the reason I make it with full charm. You can see the full image of beautiful dice in the following link.
You're going to connect the two leg–apron assemblies to the stretchers using cross lap joints. These are among the easiest and most forgiving of wood joints to make, and they're also quite sturdy. Mark the joint positions on the legs and stretchers. Start the half-lap joints on the legs by notching the two outside lines with a circular saw set to a depth of 1½ inches. Guide the saw using a triangular rafter square. Between the two outside cuts make a series of relief cuts spaced ⅛ inch apart (fig. 3). Then use a sharp chisel to chop away the waste (fig. 4). When you cut the half-lap joints on the short stretcher, set the saw's depth to 1⅜ inches deep. This will make the stretcher extend ⅝ inch past the surface of the leg when the table is finally assembled. The offset will give you a table that looks like it was built by a farmer rather than by West Elm. It'll look nice.

A luminaria (often called luminary) is a traditional Mexican lantern made from a paper bag with sand and a candle inside. We’ve add some woodworking panache to these outdoor accents and build our luminarias from wood, with box joints and a star-shaped cutout. They’re beautiful — and reusable — ways to brighten patios, steps and walkways this holiday season.
To make the top, align the three pieces of 2 x 12. Fit them as tightly together as you can. Bore four pocket-screw holes through the bottom faces of the top pieces, then spread glue on each adjoining edge. With the pieces clamped together so that the ends are flush, fasten with 2½-inch pocket screws. Glue will squeeze out of the joint. Wait a few minutes for the glue to get rubbery, then shave it off with a sharp chisel. Keep the top flat as it dries—I like to clamp cauls across both ends to add stability. Cauls are 2 x 4s or other pieces of stout wood turned on their edges.

Drilling holes sounds pretty simple, and it is! There’s a few tricks though that will help you drill better holes and get more use from your drill. The video below includes tips like catching dust, making guides for drill holes, making sure you drill to the right depth every time, and creating pilot holes. Armed with these tips, your holes should be more consistent in depth, make less mess, and always be in the right place.
The cost of being disorganized is time. It takes me ten times as long to work on a project when I am scouring the room looking for a drill bit, the right screws, or trying to remember where I last used one of my 10 tape measures. Workshop organization is an ongoing project. As you acquire more tools, you have to rearrange your shop to work in storage for those new items. So mobile and modular storage, wherever possible will save you time down the road. Here are some amazing Workshop Organization Ideas that I hope will inspire you!
If you are looking for a simple design for making your farmhouse table where you can have additional space to make more people sit, this plan could be ideal for you. The benches give you this option to allow a few more people to squeeze in. This table fits excellently in your contemporary space. This plan can be executed by any beginner, and you are also provided with square sized table and benches.
If you want to buy this project, you can easily contact here. The person who is entry level in woodworking project can feel trouble for perfect making, but if you know the step by step procedure you will never face any kind of difficulties. In this link, you will find a different style of chair plus table and personally, I like this style of the project hope you will also like it.

Getting started in woodworking can seem like a daunting task. From specialty woodworking tools to identifying and understanding the different types of wood, there is so much to know that even the old-timers are still developing. But learning and experimenting are what woodworking is all about. Get started on the right foot with some essential basics about safety, tools, lumber, and traditional layout and measuring techniques.
Finding a toolbox for a mechanic, for his hand tools, is not a big challenge at all - there are dozens of the tool boxes available on the market, from huge roll-around shop cases to small metal boxes. Plumbers, electricians, and farmers are well served, too, with everything from pickup-truck storage to toolboxes and belts. But, if you are a shop-bound woodworker then the case changes. You get to need a tool box that suits the range and variety of hand tools that most woodworkers like to have. For those who deny making do with second best, there's only one solution, you’ve to build a wooden toolbox that should be designed expressly for a woodworking shop.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
Getting started in woodworking can seem like a daunting task. From specialty woodworking tools to identifying and understanding the different types of wood, there is so much to know that even the old-timers are still developing. But learning and experimenting are what woodworking is all about. Get started on the right foot with some essential basics about safety, tools, lumber, and traditional layout and measuring techniques.
A good tool to get next is some sort of circular saw. A circular saw cuts a lot faster than a jigsaw, and it's easier to make a straighter cleaner cut with it. It's also a very useful tool for cutting up big sheets of plywood, even if you already have a table saw. At this point, you have enough tools for some simple projects such as this table or some storage shelving
Copyright 2018, Sarah Pawlak. Feel free to share what you see here but please only share one image with a link back to my page. It is not permissible to copy anything else on my site without first getting written permission from me. All printables are for personal use only. Sponsored posts always include my own thoughts and are never written by the sponsors. Affiliate links may be used at times. Pinning is always appreciated!! Thank you!
You can decorate your garden, terrace and corners of your house by stylish wooden hanging swings. These wooden items give a unique touch to your house. You can also make wonderful variety of wooden swings easily at home with the help of tutorials. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these hanging swings by joining equal size wooden pieces. You can also do easily. This creative project is entertaining as well as good activity at the same time.

Hand Tool Storage Cabinet and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Ridgid Drill/Impact combo, Bosch multipurpose drill bits … [Read more...]


All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
But first, this build was sponsored by Timber Wolf Forest Products.  They provided the legs for the build.  Also, HomeRight provided the paint sprayer for this project.  All opinions are my own and are uninfluenced.  This post also contains affiliate links.  See disclosure policy for details.  If you purchase from these links, I may receive a small commission at no extra cost to you.  This helps keep the content on this site free.  Thank you for your support and for supporting the brands that help support this site.

Use: White vinegar poured into a glass jar with steel wool that you have pulled apart and loosened. After fifteen minutes, brush onto the wood. After the surface is dry, you can leave it as-is or clear coat it with a product like Minwax One Coat Polyurethane. Distress prior to finishing, if so desired.http://www.wikihow.com/Age-Wood-With-Vinegar-and-Steel-Wool

With a little woodworking knowledge and use of some basic items, you can build a wonderful tissue box holder of your own. You can easily build them in bulk and then sell at good rates. Although easy, a wooden tissue box is an equally important and useful item for households. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. These wooden items give a classy look to your interior furnishing. This is the easiest way to spice up your tables with beautiful wooden tissue boxes. By doing this you can give style to your table settings.


This is really wonderful Art of wood. This wooden DIY Art is best for giving gifts for your loved ones. The shape of DIY wooden Art is a heart shape. You can use this as a decoration piece in your showcase. Personally, when I first see this I really like this concept and I suddenly buy it. This is the best gift for the couple. To show love and care you can write a simple message in front of the DIY Art piece. You can write a word or a complete line. For the best result of this image, you can see here for full image.


Pegboard is the master of all workshop organizational tools. You can buy full sheets (4x8) at any big box store, but most also sell smaller, more manageable sheets. And while you can just slap these up on any wall, something like this fold-out wall cabinet will double your storage and keep your tools tucked safely away. You could also try this fancy sliding-door version.

If you're dreaming of a white Christmas, prep your home with this practical and pleasing boot rack. Blogger Stephanie Lynn constructed this fixture from stock lumber and 2-inch dowels to keep the slush and mud outside the house, where they belong. Glue down the dowels, or leave them dry-fitted so you can disassemble and store the rack easily during the summer months.


Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
Your earliest notes on woodworking will look much like notes from your first days at a new job: they're comprised of words you've heard, the lingo of a community and those in the know, that don't make any sense. Just as, at a new job, you will write a word like "Aditi?" and learn that it's a nickname that means "development server," so your first notes will be "biscuit joint?" and "joiner planer? planer joiner?" 

Below you will find some of the free woodworking plans to be found on the net. Much of the information was gathered from the newsgroup rec.woodworking (also available via google groups). This list is far from complete. I'd suggest you learn to use a search engine like Altavista or Google. Just type in the project name you want to do, and "plans". This will help you find all sorts of things.


Once Jeremy and I completed our board and batten project in the living room and dining room, it became pretty obvious that our old table just didn’t fit in anymore. It was a beautiful old table, but had a ton of curvy, flowery details that felt more “grandma chic” than “rustic farmhouse” to me. I said to Jeremy, “If this was my dream dining room, I’d get rid of the grandma table and build a big, beautiful farmhouse-style table with benches.”

This was not actually a tutorial post to the woodworking plan ideas but the aim of the post was to give some easy and free woodworking ideas to the readers. If you have some time to entertain yourself and also willing to add some new stuff to your furniture you can take any idea from the list and start working on it. Be sure to see both post tutorial and video tutorials of the plan you have selected, it will make you understand everything nicely.


Woodworking is one of those activities that stimulates your creativity and gives you self confidence. As any other hobby, you should start with basic projects so you get accustomed with the skills and then move to more challenging projects. If you have a stressful life or you are just looking for an activity to help you bond with your family or friends, doing DIY projects is the ideal choice.
I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all. If you'd rather use a stain, Minwax has some great choices to choose from. A couple of my favorites are Special Walnut, Dark Walnut, Provincial, Weathered Grey, and Golden Oak.

If you're dreaming of a white Christmas, prep your home with this practical and pleasing boot rack. Blogger Stephanie Lynn constructed this fixture from stock lumber and 2-inch dowels to keep the slush and mud outside the house, where they belong. Glue down the dowels, or leave them dry-fitted so you can disassemble and store the rack easily during the summer months.
You can decorate your garden, terrace and corners of your house by stylish wooden hanging swings. These wooden items give a unique touch to your house. You can also make wonderful variety of wooden swings easily at home with the help of tutorials. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these hanging swings by joining equal size wooden pieces. You can also do easily. This creative project is entertaining as well as good activity at the same time.

We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.
Not every woodworking shop have sawhorses, but you'll find them a useful and versatile item to have at hand. A sawhorse can be used as a short-term table, workbench or benchtop stand, and can be use as a workbench extender or to as a temporary lumber self. Build your own sawhorses allows you to customize them to your own needs and wood shop requirements.
If you like a large octagon table instead of a simple round table, you can consider this free DIY plan from Ana White. This table features truss supports and pedestal base which makes it extremely durable and stable. The look might unnerve you because of the angle cuts, but you can easily get this task accomplished with the right tools. The entire list of the tools and materials required are provided. Also, the instructions are very easy to follow with illustrations included. The table has the capacity for seating six people, and it can be manufactured with a budget of around $110. 

The most useful stationary tools are a drill press and a table saw. For the longest time, I only had a cheap old contractor saw, and only a very small drill press, but I made do with those. The difference between a good drill press and a cheap drill press is much smaller than the difference between a cheap drill press and no drill press, so don't wait until you can afford the perfect one.
​Every project needs some tools and material to build on. The tools and material you will need in this plan include Miter saw, jigsaw, measuring tape screws and screwdriver etc. We will suggest you take high-quality material for the plan. Read the source tutorial and watch the video tutorial below for more details. Follow all the steps properly to make a nice and strong Rustic cooler. The tutorial explains the procedure for building this awesome gift. Make sure to use the only high-quality material for any woodworking project.
Have you heard about the wooden swords for decoration? If no, then I am sharing the picture of the wooden swords with you. This is an ideal gift for giving your loved ones. You can hang these swords on the wall and in the lobby. It looks great and gorgeous. Have a look at the pictures which I am sharing with you, I am sure you would like these pictures. These are the pictures which are best for wall decoration. So, you should choose these swords for giving the gifts to your loved ones.
We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.
The article explains step by step process for making this awesome piece of wooden art. It is actually very easy to make one.This tutorial shows the making of wooden box with one of the easiest ways. However, it is a bit difficult to make them, but not so much.I make this wooden box at home easily. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps.
While the best look of modern homestead table has been around for a short time, another harvest of farmhouse style feasting tables has been showing up of late. They are an incredible approach to join and investigate a generally present day room. The long pieces of crude wood are emotional without being overwhelming. Many combine press with recovered wood for a modern curve that is tough without being to massive.
For my kitchen equipment, I think this is one of the best projects, which I never have seen before. A Wooden spoon is a really inspiring project for me because I can cook easily without any trouble. The charm of making spoon arrives when I found the wooden spoon in the market and there suddenly I think that I must try this. When I first see this spoon I really like to create it by myself. I think for me this is the great opportunity to make wood spoon because it is a different project to do. Here you can see the full image of the wooden spoon.
I think this is one of the best feelings if you are successful in making wooden spoon by yourself without any trouble. You can create stylish and unique spoon at home. The only thing is that you just need to follow some steps for making a perfect spoon. In this video, you can see how simply the making of a spoon is and how much you need time for making is explained in this video.

How amazing to have the earrings which are very elegant looking. I just came across these earrings online with wood and you can see the designs inside it. If you wear these earrings on the parties, your personality would become attractive. Now, don’t buy expensive earrings for parties.Have a look at the image and you would find it great to make them.
Learning from the ideas of other woodworkers, while avoiding their mistakes is an excellent way to design and set-up your own shop layout. Setting up a woodworking shop as a hobby place, or for a some one more serious, who even may venture off into some sort of woodworking business; is not as easy as it might sound. Knowing the correct steps to follow will save you time and money, but it will also save you a lot of stress down the road. 

Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs within your budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. Add waterproof glue to the joints, in order to enhance the rigidity of the structure.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.

Wow, this is really big rolling dice and the special thing of this dice is that it is made from wood. I think wooden dice are durable dice. This is one of the best decorations I have ever found. The main question is that why it is so special for me? Basically, I am a game lover and I have made this wooden dice for the decoration of home. The size of this dice is large instead of normal games dice. This is really special project for me that am the reason I make it with full charm. You can see the full image of beautiful dice in the following link.
After we got all our aggression out on the table, I applied a coat of Minwax pre-stain wood conditioner followed by a custom stain I came up with. I’ve purchased several “gray” stains that are supposed to give the wood a weathered, rustic look, but no matter how many coats I add, the gray barely colors the wood at all. I wanted the table to still be light enough to show all the wood grain, but have that old, weathered look to it, and this is the perfect mix I came up with:
Bandsaws are very handy. They cut cleaner than jigsaws, but perhaps one of the biggest advantages of a bandsaw is convenience. It's my tool of choice for making most quick rough cuts. I also use it for cutting up long scraps to short pieces to fit them in the scrap box. I actually bought my bandsaw before I bought a table saw - I saw one marked down at a woodworking show, and I knew I'd get one eventually, so I jumped on it. That was before I built a bandsaw 
×