When finishing (staining) softwoods, you will get better results by "conditioning" the wood before using the stain. Softwoods are like sponges - irregular sponges - and will have areas that totally suck up stain (like end-grain) and other areas that don't take it well at all. This leads to a "blotchy" finish instead of a nice overall color. Conditioning solutions can be purchased or home-made - I've had good results with both - and they are definitely worth the time and effort. Remember: Few people notice a perfect finish - only the imperfect finish stands out ;)
Table saws, band saws, and radial-arm saws are examples of woodworking machines that are most often used exclusively in a wood shop because they are far too large and cumbersome to be portable. Even though they're confined to the shop, these workhorses are so useful that it makes sense to complete a woodworking project in the shop and carry the finished piece to the location or job site where it will be used or installed.
I wanted to have something elegant stuff made of wood then I just found this round and triangle shape table. This project is really different because it represents two shapes. When you use this table in your home everybody will appreciate your choice and everybody wishes to have a table like this. The edges of this table are in a triangle shape and front you will see in round shape.
If you need more inspiration for your next woodworking project, check out Ted's Woodworking Plans package. It has a massive collection of 16,000 projects with breathtaking step-by-step instructions, blueprints, photos and videos. We definitely got a lot of joy from creating some beautiful projects over the years and we hope you'll feel the same way.
Personally identifying information is information that can be used to identify who you are such as: name, mailing address, email address. To enter certain areas of the site, you will be required to register and provide information about yourself. This information is for the purposes of Canadian Woodworking and helps us to tailor the site to best meet the needs of our audience. 
Doing fine. I don't expect the pocket screws to fail or loosen over a typical period of time. They make a very solid joint especially if you also glue the joint. Compared to mortise and tenon a pocket screw will fail sooner under severe stress, however they are easier to repair than M&T which blow out. So I expect long use from this table unless a bunch of heavy people start dancing on it and the old wood will probably break first.
Hardware stores are full of big compound sliding miter saws. But before you buy one, ask yourself, how often do you need to cut miters on stock wider than a non sliding miter saw can handle? For the few times you have to do that, it's probably better to use a circular saw. The complicated mechanism of a compound sliding miter saw makes them bulky and less rigid. Which means an expensive compound miter saw may not make as clean a cut as you can with a table saw sled.
For the legs, we purchased black steel gas pipes which had to be measured and cut to size.  After the steel pipes were cut they had to be manually threaded with a pipe threader.  Gas fittings were used to connect the piping. This step resulted in a few choice bad words, it seems you can actually get them already threaded. But why should we take the easy route, when we can make ourselves crazy instead.
Don't believe the mainstream thinking that hand tools are irrelevant, too slow to be useful, or less effective than power tools. Ignore, or at least take with a grain of salt, the power tool devotees who will say "There's a reason they invented power tools, ya know!" Your "shop" is a bench attached to the inside of a coat-closet door in a one-room studio apartment right now. Power tools are going to bother that nice med student next door, and that closet shop doesn't have any ventilation for the amount of dust you'll produce. Hand tools can be more efficient (in speed, quick access, storage, and lack of set up), they're quieter, and the pleasure of silence afforded by quiet hand tools--just a few soft noises produced by your tools--is a pleasure not to be overlooked. They're portable and will move with you, you'll learn more about how different types of wood behave, and, when you run into one of those power tool zealots, just go over to Todd's house and watch a few episodes of The Woodwright's Shop to get your respect for hand tools back in check.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Here is a look at the completed table prior to staining and sealing the piece. I also created matching benches to fit this table. The plans can be found by clicking here. I modified the width so they are a total of 69″ wide. Instead of using a 2×10 for the breadboards I use 2×8's. Everything else was kept the same as Ana's plans. The inside span of my table where the benches fit in is 73″ so that left 2 inches of wiggle room on each side of the bench so it can easily slide in and out.
You can decorate your garden, terrace and corners of your house by stylish wooden hanging swings. These wooden items give a unique touch to your house. You can also make wonderful variety of wooden swings easily at home with the help of tutorials. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these hanging swings by joining equal size wooden pieces. You can also do easily. This creative project is entertaining as well as good activity at the same time.
So, what is a warping board? It is a very basic frame (that can be joined together by any number of methods) with a bunch of pegs poking out of it. Weavers use it as a quick and easy way to measure out a great many pieces of string or yarn, all of the same length. These are then installed into the loom as the warp, hence the name warping board. It all sounds very simple, and looks that way too, unless you approach the design scientifically – my usual mistake.
For the legs, we purchased black steel gas pipes which had to be measured and cut to size.  After the steel pipes were cut they had to be manually threaded with a pipe threader.  Gas fittings were used to connect the piping. This step resulted in a few choice bad words, it seems you can actually get them already threaded. But why should we take the easy route, when we can make ourselves crazy instead.
Hardware stores are full of big compound sliding miter saws. But before you buy one, ask yourself, how often do you need to cut miters on stock wider than a non sliding miter saw can handle? For the few times you have to do that, it's probably better to use a circular saw. The complicated mechanism of a compound sliding miter saw makes them bulky and less rigid. Which means an expensive compound miter saw may not make as clean a cut as you can with a table saw sled.

The shop you see in the layout is my current setup and has evolved over many years to accommodate most importantly the acquisition of newer equipment but also better work flow. It is a free standing two story traditional barn style with office and storage space on the second level. Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools.
Pegboard is the master of all workshop organizational tools. You can buy full sheets (4x8) at any big box store, but most also sell smaller, more manageable sheets. And while you can just slap these up on any wall, something like this fold-out wall cabinet will double your storage and keep your tools tucked safely away. You could also try this fancy sliding-door version.
Greet your guests with a happy group of snowmen made from a 4”x4” fence post. Just paint them, and then accessorize with socks for hats and flannel for scarves, like this snowman family by A Mommy's Life With a Touch of Yellow. They’ll look great for the entire winter season on an entryway table, a mantel, or a front stoop, even after the snow melts.
You can decorate your garden, terrace and corners of your house by stylish wooden hanging swings. These wooden items give a unique touch to your house. You can also make wonderful variety of wooden swings easily at home with the help of tutorials. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these hanging swings by joining equal size wooden pieces. You can also do easily. This creative project is entertaining as well as good activity at the same time.

This farmhouse table is one of the sturdiest tables that you can make. It can fit in smaller spaces but has ample space for seating four people. You can also fit in six people if you want. The benches provide that extra space and also they look great. The plans are very easy to execute. Solid oak wood is recommended for the top and turned wood legs provide a great look which you can build in about $250. 

Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
Now a day, it is not difficult to decorate your living places. We can decorate walls with beautiful and attractive wooden hangings. I am actually making one of these wooden hanging piecesfor my home. It is totally cool and creative work. We can make these eye-catching wooden hangings at home easily by using some common tools. This is the easiest way to spice up your walls. By doing this you can give style to your walls as well as mention your address on it.You can also make amazing pieces of wooden art easily at home. Although you can imagine that this is only possible for a carpenter or woodcarver. But it is not. It is actually very easy to make one.
This table is designed to be gorgeous. The table might look challenging to build, but if you follow the plan, it is very easy. If you check Step 1, you will find that cutting the joints can be done quickly and a 4 x 4 X-leg can be built with lap joint. This provides stability and durability. Moreover, the herringbone top makes the table even more beautiful.
This Welcome Farmhouse Sign post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. Farmhouse style wood signs are a fun way to personalize your space. They are fairly easy to make yourself … [Read more...]

A block plane is probably the first hand plane you'll use when getting started in woodworking. It's a relatively affordable hand tool and it's versatile. Plus, its diminutive size makes it easy to use with one hand for all types of woodworking tasks, including smoothing edges, breaking corners, trimming one surface flush to another, cleaning up end grain, and fitting joinery.

As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.The final piece looks like the one in the image. It is absolutely loveable. The design, color and looks can also be modified to suit the surrounding area.

A few years ago, I came up with a gift idea for a wooden tree ornament in the shape of a ukulele (consider it a small guitar, if it better suits your musical tastes). Instead of making each little uke individually (which would violate gift criteria #2), I make these decorative ornaments using what’s commonly referred to as the “log” method of construction. I create a single thick piece that’s shaped and appointed to resemble a uke, then slice it up into multiple thin ornaments. A single log made from scrap 8/4 stock yields eight to nine individual ornaments.

It was murderously hot here in the Charm City suburbs last weekend. The heat index topped a full 115 degrees on Saturday. But fear not, the heat didn’t deter us from tackling our long-awaited shed storage shelves project. We’re excited about this project because we’ve been looking forward to sharing a plywood shelving article for some time now, and this article gives us the perfect avenue for that. In case you’ve forgotten (or more likely if you’ve just started reading here), here’s the new shed. It looks great on the outside, but without some shelving and storage hooks for tools inside, most of the interior space would go to waste.
The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color.
The original plans for the project are from Ana White's website, who has hundreds of free plans available. I modified the table by making the table wider and longer. The larger size provides more space to spread out and for food or a centerpiece in the middle. This table has been a conversation piece and has worked great for our dinner parties and meals. This farmhouse table will last for years and will be able to be passed on to family members for generations. Whitney from Shanty-2-Chic also has a post about creating this table and she collaborated with Ana-White on her project.
Disclaimer: Almost any DIY project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Rogue Engineer has made every effort to be complete and accurate in the instructions provided on this website. Rogue Engineer will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer's operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.
10. Drip cyanoacrylate (CA) glue into the ball while holding the cap in place.This will firmly anchor the ball to the cap. To attach the hanging wire (see Sources, below), place a drop of glue on top of the hole and push in the wire. Apply glue to the icicle’s tenon and place it in the bottom hole. Slow setting CA glue works best for oily exotic woods such as rosewood and ebony.
A block plane is probably the first hand plane you'll use when getting started in woodworking. It's a relatively affordable hand tool and it's versatile. Plus, its diminutive size makes it easy to use with one hand for all types of woodworking tasks, including smoothing edges, breaking corners, trimming one surface flush to another, cleaning up end grain, and fitting joinery.
This design looks extremely stylish which you will want to sport in your kitchen or living space. However, you might think it will be difficult to make this stylish three pedestal table but stay rest assured, even if you are a novice at woodworking, you can create this project with ease. The design is extremely simple to make and brings a charming feel to your room.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.

I think you can see from all of these choices, the best solution is the one that works for YOU and your home. Just make sure you create an environment that makes you feel creative and excited to work. And while there are amazing workshops online for inspiration, don’t go crazy thinking your work area needs to be a renovation in and of itself! Use bits and pieces of inspiration, then get going on your projects!


Have you ever heard about a chess which is made of wood? If not, then I am presenting a chess which is the most beneficial and attractive one. I am sharing its picture with you and you can make this chess very easily. The most amazing thing is that you can present it as a gift to other fellows. They would surely admire your gift. I am sharing some pictures of this chess; just have a look at these pictures. I am sure you would like these pictures. 

This is another very simple and traditional farmhouse table which is extremely strong and durable with no wobbling. Also, from the very look of the table, you can understand that this project will be very to make. This plan has been inspired by Ana White’s DIY plan and modified by DIYPete making the design a unique one. The two benches make the table look simpler and also provide ample seating capacity.
It's nice to be on your site getting plans and building projects.  I was so inspired by you I went out and bought Ryobi tools, and have since built 3 projects all on http://www.Ana-White.com/ by you.  I loved building the Potting Table, and better yet my Mother loved it when I gave it to her as a gift.  I am now working on the Farm House style Table and Benches.  I can't wait to see how they turn out!  
Doing fine. I don't expect the pocket screws to fail or loosen over a typical period of time. They make a very solid joint especially if you also glue the joint. Compared to mortise and tenon a pocket screw will fail sooner under severe stress, however they are easier to repair than M&T which blow out. So I expect long use from this table unless a bunch of heavy people start dancing on it and the old wood will probably break first.
In my design, I considered 3 different types of legs made from 30" long cedar 4x4s.  (You could use other types of wood including gluing three 2x4s together to make solid legs.)  The simplest design was to cut the legs to length and use the 4x4s square.  Second was to taper the two inside surfaces and third was to taper all four surfaces.  I ended up tapering all 4 sides on my bandsaw.  The cut line begins 4" from the top and removes 1/2" at the bottom.  Pic 2 shows how little I removed.  I wanted the legs to have "shape" while remaining stout in appearance and this slight taper seemed about right.  Pic 2 also shows the levelers in the bottom of these legs which were salvaged from a previous project.  I decided to leave the levelers and shortened the legs a bit.
Bandsaws are very handy. They cut cleaner than jigsaws, but perhaps one of the biggest advantages of a bandsaw is convenience. It's my tool of choice for making most quick rough cuts. I also use it for cutting up long scraps to short pieces to fit them in the scrap box. I actually bought my bandsaw before I bought a table saw - I saw one marked down at a woodworking show, and I knew I'd get one eventually, so I jumped on it. That was before I built a bandsaw

To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.


Hand Sanders are the simplest and cheapest sanding you can do and will likely work well for most small projects. You buy the hand sander which is a plate with a handle (typically ~$5) and then attach pieces of sandpaper to the bottom. The biggest advantage to a hand sander is it’s very cheap. It does take a bit of time, but you can achieve a perfectly acceptable finish with it.
Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.
This farmhouse table is one of the sturdiest tables that you can make. It can fit in smaller spaces but has ample space for seating four people. You can also fit in six people if you want. The benches provide that extra space and also they look great. The plans are very easy to execute. Solid oak wood is recommended for the top and turned wood legs provide a great look which you can build in about $250.
Actually, you're going to have the opposite problem because you'll meet people who DO cheap out on tools and find they don't work all that well, wear down quickly, and don't last that long. You will want the best of best but not be able to afford them all the time. You will find, more often than not, that some very good tools are available in the mid-priced ranges: not the least expensive but not the most, either. For example, these two sets of chisels are not terribly expensive but well made and a great quality for the price: Marples and the beginner's set I got from Woodcraft that's Made in the USA. You can ask for the nicer ones for Christmas when people ask for ideas. It's good to think of tools as things that you buy once, where possible, but there are some deals to be had.
Pegboard is the master of all workshop organizational tools. You can buy full sheets (4x8) at any big box store, but most also sell smaller, more manageable sheets. And while you can just slap these up on any wall, something like this fold-out wall cabinet will double your storage and keep your tools tucked safely away. You could also try this fancy sliding-door version.
Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
×