Disclaimer: Although it is my intention to provide accurate plans and clear instructions, not all plans have been tried and tested. Using plans or information found on SawdustGirl.com indicates that you agree with the Terms of Use policy and will accept full responsibility for the process and outcome of any project you attempt. All plans are for private use only. Plans and information published on SawdustGirl.com may not be reproduced, republished or distributed in any manner without written permission from Sandra Powell, Sawdust Girl. Actual projects built using Sawdust Girl plans may be published on your own site without instructions or "tutorial" as long as you provide a link to my original post with full post title or "SawdustGirl.com" as link title.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.

Whatever type of sander you use, you’ll be using sandpaper. Most sandpaper is aluminum-oxide and comes in different grits. The grit is a measure how fine it is and will determine what you’re using it for. Grits typically range from about 20 to 1000, 20 being extremely course and 1000 being extremely fine. When sanding, if you have a lot of material to remove and really need to smooth things out, a low or course grit will be best. Once you’ve sanded with the coarse grit move to a finer grit, typically up around 200 for finishing.


A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
Creativity through woodworking brings the best combination of DIY wooden Art. Any shape can easily make through the following simple steps. Keep that thing in mind that you need enough space for writing a message in this project. I just love this concept because of more beautiful work more chance of people attraction. In this video you can see the message for the whole family or choose for your friends also. For more detail check this video.

We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.
There are different grades of tools available at different prices. Salesmen will probably tell you to get good quality tools that last a lifetime. But the price difference between a cheap tool and a good quality tool can easily be a factor of four. My advice is to get cheap tools first and use them until they break. Once they break, it's time to consider getting something better. But unless you are a professional who uses the tools every day, even a cheap tool is likely to last a long time.
Right now, Beginning Woodworker Self, your definition of "scrap" is a shim or a 1" piece of end grain. But "scrap" means something else to lumber yard owners and purveyors of fine hard woods, like 2' lengths of thick mahogany and 8"x6" chunks of black walnut. One day, your friend Peter, who already knows how to ask for scrap, will go to a local lumber company and ask if he can buy some. The owner will tell your friend that he can take as much scrap as he can carry in his car for $100. Peter drives a VW bus, and will have the rafters of his garage filled with multi-foot lengths of cherry, mahogany, black walnut, maple, and poplar for many years to come. Ask for scrap.
10. Drip cyanoacrylate (CA) glue into the ball while holding the cap in place.This will firmly anchor the ball to the cap. To attach the hanging wire (see Sources, below), place a drop of glue on top of the hole and push in the wire. Apply glue to the icicle’s tenon and place it in the bottom hole. Slow setting CA glue works best for oily exotic woods such as rosewood and ebony.
If you are searching a very stylish gift for your friends who are females, then your search ends here, as I am sharing a leaf shape jewelry box that is the most stylish one. I am sure your friends would love to have it. They can keep their jewelry in this box. You would not need any other box for keeping your essential items. If you would give it as a gift, your friends would surely love to have it. I am sharing some of the pictures of this jewelry box, just have a look at these pictures.

You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂
This farmhouse table is one of the sturdiest tables that you can make. It can fit in smaller spaces but has ample space for seating four people. You can also fit in six people if you want. The benches provide that extra space and also they look great. The plans are very easy to execute. Solid oak wood is recommended for the top and turned wood legs provide a great look which you can build in about $250.
Block planes range in quality and price from hardware-store versions that cost around $35 to high-end brass planes that cost as much as $250. While the higher-priced models are likely to perform better out of the box and include higher-quality machining and parts, low-cost block planes can perform well if tuned up properly using the techniques detailed in this episode.

Hey I love this article,Thanks. 4 months ago, I started looking for woodworking. The industry is extremely interesting but I have problems with how I can do it.My uncle who has been doing more than me in this industry, has suggested to me to follow Teds plans, Do you think it’s a good move to follow these plans? ? I keep reading good reviews about Teds Plans but I am unsure if it will still work on me.At this time I can purchase these plans at a very low price,so if possible can you leave me feedback on wether I should do it or not. It would mean a lot coming from an expert in this field.

I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color.


In my project section I wrote an article about small boxes made with a router. The article was written years ago and the boxes were made several years before that. Thus, I had to use one of those old boxes to write this article as I couldn't exactly remember how I made them. The initial construction process came from that great Canadian TV show, The Router Workshop, but the jig I use was born of necessity. One year I decided to build a pile of these boxes and enter a craft fair. After two or three, I decided there had to be a faster way to set up for the cuts, so I used a discarded table saw sled to fashion the jig in this article.
Don't believe the mainstream thinking that hand tools are irrelevant, too slow to be useful, or less effective than power tools. Ignore, or at least take with a grain of salt, the power tool devotees who will say "There's a reason they invented power tools, ya know!" Your "shop" is a bench attached to the inside of a coat-closet door in a one-room studio apartment right now. Power tools are going to bother that nice med student next door, and that closet shop doesn't have any ventilation for the amount of dust you'll produce. Hand tools can be more efficient (in speed, quick access, storage, and lack of set up), they're quieter, and the pleasure of silence afforded by quiet hand tools--just a few soft noises produced by your tools--is a pleasure not to be overlooked. They're portable and will move with you, you'll learn more about how different types of wood behave, and, when you run into one of those power tool zealots, just go over to Todd's house and watch a few episodes of The Woodwright's Shop to get your respect for hand tools back in check.
You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂

9. Support the spindle with one hand as you cut icicle shapes. First turn a tenon at the tailstock end to fit the lower hole in the ball. Undercut the tenon’s shoulders so the icicle fits tight on the rounded bottom of the ball (Fig.A).Then turn the larger diameter cove, beads and fillets. Move downhill towards the headstock to cut the smallest diameters last. Apply a finish.
Just check out this enticing and legant mirror that portray woodworking art finely blended with creativity. You can have it on the wall, especially in the lobby it looks great. It enhances the looks of your dinning room and your drawing room. I just found this over the interent and people are highly admired by this design. So, lets have a look at its image, you will get guidance on making it.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Woodworking is accessible to people of all ages, skill levels, and budget. Don't expect to be the Wood Whisperer overnight, but there are plenty of woodworking websites that offer free plans and tutorials to help you every step of the way. One of these sites is Chief's Shop from Chris Hill, who has been a woodworker his entire life. He offers some great advice for woodworking newbies, which is also a great reminder for those with a bit more experience:

This activity shows the making of square shape wooden cutting board with one of the easiest ways by using basic tools. I made it at home for my inspiration behind easy steps. This tutorial is easy enough for even beginners to understand and follow. So I am not going to explain each and every step. You can also make by painting the wood pieces, cutting, assembling, and joining in a square order to make it and put it in every corner of your kitchen to give classy look.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
For many beginners just getting interested woodworking as a hobby, the hardest part of the process is determining what tools and equipment you need and what you can live without. In this episode, we share our recommendations for the best tools and equipment to acquire when setting up your first woodworking shop, from a sturdy workbench to the right mix of hand and power tools.

Farmhouse tables are generally designed to be large, but this plan from Addicted2DIY is unique for providing a seating capacity of 10 people. For holidays or parties, if you are inviting a lot of guests, your farmhouse table will be a perfect seating for all enjoying meals together. Of course, you need to have that huge space in your kitchen or living area to keep this table.
This Privacy Policy covers CanadianWoodworking.com's treatment of personally identifiable information that CanadianWoodworking.com collects when you are on the CanadianWoodworking.com site, and when you use CanadianWoodworking.com's services. This policy also covers CanadianWoodworking.com's treatment of any personally identifiable information that CanadianWoodworking.com's business partners share with CanadianWoodworking.com.

This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!


Nothing could be easier to accomplish than these rustic, personalized wood slice tree ornaments. After slicing a log into discs, screw in an eye hook, and thread with some jute twine for a hanger. Decorate with paint or metallic markers, or try the clever ink-jet-printer transfer technique that Upcycled Treasures used for the ornaments shown here. One log will make gifts for your entire extended family.
There was one crack which required stabilization to prevent further splitting.  On an old piece of wood there is nothing more beautiful than a contrasting butterfly inlay to lock the pieces together.  Alternatively you could glue and clamp the split, however it is hard to get enough glue into the crack and an inlay looks much better.  I used a piece of bloodwood and an inlay jig on my router for the butterfly.  This was the first time I've tried inlay and it was very easy.  While the butterfly is beautiful & interesting, it acts functionally as 2 opposing wedges to prevent the crack from widening.  The last pic shows the finished product.
×