Have you ever seen a knife made of wood? It is only for decoration purpose, but it can be a great gift. I hope you would like this. You can give this knife as a gift to your fellows and it is very amazing that this knife is also sharp. Give this knife as a gift and they would surely like it. I am sharing some pictures of this knife and I hope that you would like them. Just have a look at the pictures.
These attractive gifts look like mini treasure chests. Here are the free woodworking plans, and assembly instructions to make these nice looking wooden boxes (Children's Mini Desktop Treasure Chest) from scratch. Recycle that scrap wood into a fantastic gift. A rewarding Saturday Arts and Crafts project. Free DIY (do-it-yourself, D.I.Y.) to give as a gift. Make a keepsake by using these woodworking plans.
My own personal shop is a 20x20 section of my garage. Some people might argue that I've got plenty of space, but those people obviously feel their lives are complete without owning a panel saw. I'm not judging. I'm just saying that panel saws are awesome. And even with four-hundred square feet I need to find some creative storage solutions in the shop to accommodate my power tool addiction. There are plenty of people who have done a lot more with a lot less. Here are some of my favorite space saving workshop ideas.
In my project section I wrote an article about small boxes made with a router. The article was written years ago and the boxes were made several years before that. Thus, I had to use one of those old boxes to write this article as I couldn't exactly remember how I made them. The initial construction process came from that great Canadian TV show, The Router Workshop, but the jig I use was born of necessity. One year I decided to build a pile of these boxes and enter a craft fair. After two or three, I decided there had to be a faster way to set up for the cuts, so I used a discarded table saw sled to fashion the jig in this article.
Some friends of ours have been wanting a DIY farmhouse table for some time now. After hearing about their shopping trip and the prices they were looking at spending on one I felt obligated to step in and make this one of my next DIY projects. My buddy Jake has no experience with power tools whatsoever, bless his heart. So, you’re in for a special treat with this one as you will get to see Jake build this table from scratch with no power tool experience! With a little guidance from me of course.

Methods for skinning a cat have nothing on ways to build a bench. Explore different joinery methods and work with those that you are able to complete the best. Don't overcomplicate something when it doesn't need to be. There's a reason tools have improved, glue has gotten better, fasteners stronger, and new joinery methods have been introduced. A lot of the time the focus in woodworking is on finding shortcuts to get the same or better results. Don't let joinery snobs influence you.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
Choose a light-colored wood with interesting grain for the ball. It should be one solid piece, 2 1⁄2- to 3-in. square. I like to make more than one ornament at a time, so I use a rough blank about 8-in. long in order to make two balls. Make the cap and icicle from a contrasting dark wood that takes fine details. I like to use rosewood or ebony. You’ll need a piece that’s 1-in. square and 8-in. long.
This Welcome Farmhouse Sign post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. Farmhouse style wood signs are a fun way to personalize your space. They are fairly easy to make yourself … [Read more...]

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!

I just discovered your site and I’m enamored! You are truly gifted and I love your style. This post really spoke to me because 1. I have sons too 2. We are just about to re-do our kitchen table 3. I just wrote a whole post about our kitchen table on my website. I feel like the kitchen table really is a sacred place for family and it’s beautiful that you built yours together. If you want to read my kitchen table post, check it out at http://kirstenjoyhobbs.weebly.com/homemaker/the-kitchen-table-a-horror-story. Cheers 🙂
The idea of homestead to-table is being embraced by eateries, as well as being ingrained in more youthful eras. Homestead to-class or ranch to-cafeteria developments are becoming across the country. This backings little to-medium size neighborhood cultivates by giving them consistent business, and consequently, understudies get sound privately developed sustenance. Many schools likewise offer sustenance training that means to show kids where nourishment originates from and to be sound eaters.
There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are twenty woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.
It's nice to be on your site getting plans and building projects.  I was so inspired by you I went out and bought Ryobi tools, and have since built 3 projects all on http://www.Ana-White.com/ by you.  I loved building the Potting Table, and better yet my Mother loved it when I gave it to her as a gift.  I am now working on the Farm House style Table and Benches.  I can't wait to see how they turn out!  
Basically, as you beginner you will need the following tools: a drill, an impact driver, a miter saw and a sander. With these tools you can cut, join and finish wood as a professional. If you want to save time and improve the quality of your work you can upgrade and buy yourself a pocket hole jig, a router, a thickness planer and a table saw. I have created a complete guide with tool recommendations and reviews HERE, so you make an informed decision.
These attractive gifts look like mini treasure chests. Here are the free woodworking plans, and assembly instructions to make these nice looking wooden boxes (Children's Mini Desktop Treasure Chest) from scratch. Recycle that scrap wood into a fantastic gift. A rewarding Saturday Arts and Crafts project. Free DIY (do-it-yourself, D.I.Y.) to give as a gift. Make a keepsake by using these woodworking plans.
The article explains step by step process for making this awesome piece of wooden art. It is actually very easy to make one.This tutorial shows the making of wooden box with one of the easiest ways. However, it is a bit difficult to make them, but not so much.I make this wooden box at home easily. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps.

Woodworking project plans provide extensive assistance. Project plans are available with variations of Santa and his sleigh and reindeer, candy canes, polar bears, trains, and toy soldiers. Or maybe you’d prefer a more religious display. Wouldn’t an angel or a nativity scene look heavenly on your front lawn? You’ll be able to find project help for practically anything you think of related Christmas.
This box is the fifth generation of this design. After each production run of about 20 boxes, I make slight design changes to enhance the look and simplify the machining. Any hardwoods would work, but since the box uses so little lumber, I prefer to incorporate highly figured woods. For safety, ease of construction and consistent cuts, I use a jig for bevel-cutting the legs and another jig for beveling the top surface of the lid.
This table is designed to be gorgeous. The table might look challenging to build, but if you follow the plan, it is very easy. If you check Step 1, you will find that cutting the joints can be done quickly and a 4 x 4 X-leg can be built with lap joint. This provides stability and durability. Moreover, the herringbone top makes the table even more beautiful.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
So I thought this would be the perfect project to try out my new sprayer on and, I’m telling you, friends…LIFE CHANGING.  I mean, I’ll be honest, there is a learning curve to spray painting.  There were some spots that I got a little too much paint and spots I didn’t quite get enough the first couple coats.  But, even with my amateur skills, this still saved me hours of time and looked WAY better than if I had brush painted.
You can create a simple and affordable eye catching frame for your artwork out of a great old wooden ladder. Simply turning the ladder on its side will allow you to display quite a lot of art in a row for so little money. This simple home decor craft project is an affordable way to introduce color, the vintage look, and even some architectural interest without costing a fortune.
Isn’t it amazing to have a wooden bangle in your hand? I am sure you would like this bangle and would love to wear it. This type of bangle is very rare and it is also very durable. It cannot be broken very easily. You can see the different designs of this bangle and can enjoy wearing it. I am sharing some of the pictures of these bangles; just have a look at these pictures and start your project. These pictures are for your help. So, have a look at these pictures for getting an idea on its making.
If you are a starter, this is another design you can consider to build. The step by step instructions provided by Boxy Colonial are easy to follow, and the list of materials and tools are also provided. This farmhouse table can be used for any purpose like reading or writing, playing cards, eating, or any other activities where you need a table. Six people can easily sit at the table together.
Liz Fourez started Love Grows Wild in 2012 with a passion for interior design and homemaking and a dream to help others create a home they love.  From simple project tutorials, to holiday and entertaining ideas, to her journey renovating a 1940’s farmhouse, Liz demonstrates how to create a beautiful and inviting home with a handmade touch. She turned her signature cozy, neutral style into a best-selling book in 2016 and continues to inspire readers with her captivating photography and easy decorating ideas. Read more about Liz > > > >
While metal machinists’ straightedges are ideal for setting up woodworking machinery, their high-tolerance accuracy and weight are overkill for most woodworking tasks. For centuries, shop-made wooden straightedges handled many layout and testing chores, and the tools are still useful today. Wooden straightedges are lightweight, simple to make in any size and can be easily trued with common workshop tools. While straightedges that resemble the machinists’ versions – essentially a skinny rectangle with parallel edges – are useful, these tend to go out of square quickly as the seasons change. However, by understanding a bit about the way wood works, you can make a wooden straightedge that is both accurate and durable.
​Luckily, we have also managed to find a detailed video tutorial of the Barn door project that illustrates the process of building a Barn door of your own. The steps and instructions in the video tutorial are different from the source links listed above. Actually, you can make different types of designs for your Barn door depending on which one you can afford easily and DIY on your own.

Isn’t it amazing to have a wooden bangle in your hand? I am sure you would like this bangle and would love to wear it. This type of bangle is very rare and it is also very durable. It cannot be broken very easily. You can see the different designs of this bangle and can enjoy wearing it. I am sharing some of the pictures of these bangles; just have a look at these pictures and start your project. These pictures are for your help. So, have a look at these pictures for getting an idea on its making.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
Life Storage has come with a perfect mix of rustic designs and materials with a touch of modern furniture style. The timeless elements and cleanliness give a trendy look. If you can afford $300 for a farmhouse table, this free plan is ideal for you. Even if you are a beginner, you can build this 10-seater farmhouse table which acts for storage as well.
To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
×