This cute earring box is the ideal one for giving the gifts to your loved ones. Have you ever given your gift in a wooden jewelry box? When you meet with your friends and family it is a very great idea to surprise them with such gifts. They would really admire your selection. I am sharing some of the pictures with you, which are about this earring box. Have a look at these pictures; I am sure you would like them.

To inset the aprons 3/4" from the outer surface of the legs I made a spacer from 2 pieces of plywood.  This little jig made it easy to keep the distances uniform and also secure the apron to the leg while fastening.  Pic 3 illustrates how the jig, apron and leg are clamped together for fastening.  Each apron end is held by three 2 1/2" pocket screws.  The pocket holes were made using a Kreg pocket hole jig.  I assembled the short ends first and then the rest of the table base making sure the kerf (for clips) was along the top edge.  Since this is a long table I also added a cross piece in the middle of the table using pocket screws.


To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
After we got all our aggression out on the table, I applied a coat of Minwax pre-stain wood conditioner followed by a custom stain I came up with. I’ve purchased several “gray” stains that are supposed to give the wood a weathered, rustic look, but no matter how many coats I add, the gray barely colors the wood at all. I wanted the table to still be light enough to show all the wood grain, but have that old, weathered look to it, and this is the perfect mix I came up with:

With a little wood glue and imagination, painted 2”x2” wood pieces are topped with wooden balls and then dressed with fabric and a twig shepherd’s hook. A smaller wood block, peg, and fabric make the manger in this craft from The 36th Avenue. Place inside a paper-lined crate graced with a craft paper star, and the true meaning of Christmas will quickly come to life.
This is really easy and simple project. The person who is entry level in wood working can easily do this by following some steps. You can use this as a decoration piece in your home.The main thing is that you need a full command for using wooden tools and machine.It depends on your taste that what style you are presenting in making alphabets. Visit this link if you want to make this project by yourself. In this link you can see how to make alphabet signs.
Not every woodworking shop have sawhorses, but you'll find them a useful and versatile item to have at hand. A sawhorse can be used as a short-term table, workbench or benchtop stand, and can be use as a workbench extender or to as a temporary lumber self. Build your own sawhorses allows you to customize them to your own needs and wood shop requirements.

In the parties you always need a candle stand for enhancing your decoration. This candle stand is a very stylish one and it always adds beauty to your lounge. In the washroom, you also need some candles while having a bath. In the washroom, you can keep this candle stand on one side. The soothing effect would increase by these candles and this candle stand is really a marvelous one as it is made in a stylish way. You can create it very easily and can give it to your friend as a gift. Let’s have a look at the pictures which I am sharing with you.
While the best look of modern homestead table has been around for a short time, another harvest of farmhouse style feasting tables has been showing up of late. They are an incredible approach to join and investigate a generally present day room. The long pieces of crude wood are emotional without being overwhelming. Many combine press with recovered wood for a modern curve that is tough without being to massive.
Because these legs were salvaged they had old screw holes in them which were filled prior to painting.  In retrospect, it probably would have looked cool to just leave them.  I lightly sanded the legs with 100 & 150 grit sandpaper which smoothed them without removing all the saw marks.  One coat of chalk paint and 2 coats of clear Briwax was used to finish the legs.  Briwax yellows the finish a bit which aged the paint nicely.  Between coats of Briwax I sanded through the paint on some of the edges with 100 grit paper to show wear.  

Our recommended tool kit includes: a sturdy workbench with a woodworking vise to hold workpieces steady when cutting or shaping parts. Marking and measuring tools for laying out and cutting parts. A circular saw or tablesaw for making rip cuts (straight cuts with the grain) and cross cuts (straight cuts against the grain). A router for shaping edges and profiles and cutting joinery. A block plane to shape parts by hand or smooth rough surfaces. A jig saw or bandsaw for making curved or irregular cuts. A palm sander to smooth surfaces for finishing. And a collection of clamps to assemble your projects or hold pieces on your workbench
To start, you'll want to cut out the pieces. Crosscut the top pieces, breadboard ends, stretchers, and legs. Note that the breadboard ends are slightly wider than the tabletop. This is a rustic detail with a practical aspect. It will allow the top to expand and contract with humidity and never be wider than the breadboard ends. There is also a slight overhang on the stretchers, for a similar reason. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Chairs with arms should be able to easily slide under the table's aprons.
×