This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.

Per usual, I used pocket screws to fasten the table top together after applying glue to the edges.  Pic 3 shows the underside of the table.  A straight edge clamp and a circular saw were used to trim the ends of the top.  The blue masking tape helps limit splintering from the saw.  To see if the table was square, I compared the diagonal measurements across the table top.  Diagonal measurements on a square or rectangle should be equal if the piece is square on all corners.  It's not very critical on a rustic, distressed table since the table's charm comes from it's imperfections.


Per usual, I used pocket screws to fasten the table top together after applying glue to the edges.  Pic 3 shows the underside of the table.  A straight edge clamp and a circular saw were used to trim the ends of the top.  The blue masking tape helps limit splintering from the saw.  To see if the table was square, I compared the diagonal measurements across the table top.  Diagonal measurements on a square or rectangle should be equal if the piece is square on all corners.  It's not very critical on a rustic, distressed table since the table's charm comes from it's imperfections.

If you’re looking to show off you’re woodworking skills and you have a piece of wood with a beautiful linear grain pattern, then this box project is a great choice. It’s a more refined box design, and as you might expect, it’s a little more challenging to build than the simple keepsake box presented earlier on this gift list. The sides are constructed so that the wood grain flows smoothly across one face, around the corner and into the adjoining face — and all the way around the box without a break — the grain itself becomes a major part of the design. The design is also enhanced by tapering the box sides, allowing the eye to more easily take in the continuous run of grain at the corners.
East Coast Creative provides this DIY plan to make your farmhouse table which can be used for a picnic with many guests. This gigantic table can fit 12-14 people. Though it does not have benches, the top of the table spreads out like a traditional picnic table. You can add chairs of your choice and so, if you want to add a modern twist, simply choose chairs with modern styles.

A good tool to get next is some sort of circular saw. A circular saw cuts a lot faster than a jigsaw, and it's easier to make a straighter cleaner cut with it. It's also a very useful tool for cutting up big sheets of plywood, even if you already have a table saw. At this point, you have enough tools for some simple projects such as this table or some storage shelving
This Farmhouse Side Table post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. Building a new farmhouse side table to go along with my farmhouse coffee table has been on my list for a … [Read more...]
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details on internet. Follow the steps properly to make a nice and strong wall wooden hanging. This wooden piece makes wooden clips to hold decorative items. The tutorial explains the procedure for building this beautiful wall hanging. Make sure to use only high quality items for any woodworking project.
I recently met  a man  known among local woodworkers for having a large workshop with a lot of tools. He offered to show me his workshop, and  take photographs of it. His workshop covers the entire basement of a large 1800 square foot bungalow. It's difficult to capture this workshop in just a few photos, so I figured I'd include a large number of photos.
Often you are in search of an outstanding and unique gift for your friends and family members. You need such gift which is the most admirable. I am introducing a puzzled shape bear and a duck, which can be used for decoration on the wall or you can use them as table mats. This gift is an amazing start for you in woodworking. It would look beautiful when its gift pack would be opened. I am sharing some of the examples of these pictures. Have a look at them.
So I thought this would be the perfect project to try out my new sprayer on and, I’m telling you, friends…LIFE CHANGING.  I mean, I’ll be honest, there is a learning curve to spray painting.  There were some spots that I got a little too much paint and spots I didn’t quite get enough the first couple coats.  But, even with my amateur skills, this still saved me hours of time and looked WAY better than if I had brush painted.
Table aprons are the boards that make up the sides of the table base and connect the legs.  They are also called table skirts.  Dimensions are 3 1/2" wide and 22 1/4" long across the ends and 62" long down the sides.  For a 34x72 inch table and 4x4 legs, these apron lengths inset the legs roughly 2" on all sides.  The wood is 3/4" to 1" thick rough-cut wood from our old barn.  The red color was a little stark so I sparsely brushed a coat of chalk paint on and waxed again with Briwax.
Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.
Our tables are available in any base design including a variety of leg, single pedestal, double pedestal and trestle designs.  When considering what type of table base you want, it is important to consider both look and functionality.  Leg style bases (tapered, square, turned or curved) provide the traditional farmhouse table look and are the most economical option.  Single pedestals work well with round and square tables.  Double pedestal and trestle tables are great for longer tables and tight seating requirements.
#00 Steel Wool and White Vinegar – Put a handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least a couple days. The mixture will get darker the longer you let it sit. Once diluted, simply paint the mixture on your piece. Oxidation will occur and the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all.
If you are searching any gift for your loved one this decoration piece is the ideal one. You can decorate it on the wall and with its good look your lounge would look great. If you are giving a gift to your family members they would surely admire you and like this gift very much. This running deer is creating an outstanding impression on the people and they tend to have it on the wall of their lounge. It would fit best in the lobby too. I am sharing some of the pictures of this dear; just have a look at these pictures.
The first – and some say the most important choice in designing a dining table is size.  Since our tables are made-to-order we can offer a farmhouse table in any size, shape, style or color.  Do you need a 12 foot table, 72″ round pedestal table, a narrow 32″ wide trestle table, a 36″ high counter height table?  Large, long, narrow, small, square, round, oval tables.  All no problem.  We can make any of these and more.   Farmhouse tables are available as either new wood tables or old reclaimed wood.    
There are also project books that provide fun new ideas to play with on the scrollsaw, and the fun is made even better when you’re being productive by making gifts at the same time. If you’re a carver, there are many project ideas available to you, as well. There are also Christmas projects for the woodturner. One popular idea is to make ornaments for your tree—or someone else’s. There are several books that will provide help specifically for making ornaments. You’ll find that woodturning allows an opportunity for endless creativity! You can find a variety of kits available, and then you can use whatever material you prefer to turn and then shape and finish any ornament you can imagine!
×