Disclaimer: Although it is my intention to provide accurate plans and clear instructions, not all plans have been tried and tested. Using plans or information found on SawdustGirl.com indicates that you agree with the Terms of Use policy and will accept full responsibility for the process and outcome of any project you attempt. All plans are for private use only. Plans and information published on SawdustGirl.com may not be reproduced, republished or distributed in any manner without written permission from Sandra Powell, Sawdust Girl. Actual projects built using Sawdust Girl plans may be published on your own site without instructions or "tutorial" as long as you provide a link to my original post with full post title or "SawdustGirl.com" as link title.
Wood screws often have a coarse pitch, unthreaded shank (the bit between the head and the tip), and flat heads. The coarse pitch helps the wood screw tap into the wood and make a solid connection. The unthreaded shank is used so that the head can go flush with the wood beneath it without the threads getting in the way. Flat heads are typically used so that the screw can sit flush against the wood. Most wood screws also require a pilot hole, which you should drill with a drill bit prior to screwing the screw into the wood, find a chart on what size hole to drill for what screw here.

Love the table! My husband and I are looking to build a table for our dining room. We love this table but I am having a hard time convincing him that people can still easily sit at the ends of the table even though there are support boards on the bottom. He seems to think that will get in the way (even though you clearly show your husband sitting on the end in one of the pictures 🙂 ) Can you tell me if it is a problem for those sitting on the end? Thank you!!
This practical entryway storage unit is made from solid wood and is glued together: no nails or screws (apart from those that hold it to the wall) are used. In this case, we made it out of soft maple, but it could be made from any good quality solid wood: pine, oak, birch, fir…whatever best matches the trim or furnishings in the place where it will be mounted to the wall.

You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂


To make the top, align the three pieces of 2 x 12. Fit them as tightly together as you can. Bore four pocket-screw holes through the bottom faces of the top pieces, then spread glue on each adjoining edge. With the pieces clamped together so that the ends are flush, fasten with 2½-inch pocket screws. Glue will squeeze out of the joint. Wait a few minutes for the glue to get rubbery, then shave it off with a sharp chisel. Keep the top flat as it dries—I like to clamp cauls across both ends to add stability. Cauls are 2 x 4s or other pieces of stout wood turned on their edges.
As with most websites, we do log web visits. This information, however, does not have a link to you personally. These logs help us understand the needs of our audience and the areas of our site that you do or do not find useful. When you simply browse our site, no personal information is being collected.  We may disclose this non-personal information to third parties such as sponsors, clients or advertisers.
In this month’s woodworking project demonstration, George Vondriska teaches you the step-by-step process for building a coat tree that will look great in your home or workshop. He demonstrates the simple techniques for installing wrought-iron hooks, crafting the coat tree’s feet, and quarter sawing to achieve that beautiful face grain on all four sides.
Because the legs I used are rather large and chunky, I wanted my apron to be larger than normal so it looked proportional.  Typically, a 2×4 is fine for an apron, but I used 2x6s and cut them down to 4 1/2″ wide using a table saw.  A standard 2×6 is 5 1/2″ wide.  You could leave it at 5 1/2″, just keep in mind the chair height and make sure you will have enough leg room to slide under.  If you wanted a less chunky leg, Timber Wolf has many other options on their website 🙂
Some tools required to build a picture frame are a table saw, miter saw, measuring tape, wood glue etc. A table saw with a backing board and miter gauge can be used to get the right angle and lengths of picture frame every time. You can use builders square to arrange the final cut pieces before nailing, screwing or gluing. Check out the video tutorial below for more details.

This box is the fifth generation of this design. After each production run of about 20 boxes, I make slight design changes to enhance the look and simplify the machining. Any hardwoods would work, but since the box uses so little lumber, I prefer to incorporate highly figured woods. For safety, ease of construction and consistent cuts, I use a jig for bevel-cutting the legs and another jig for beveling the top surface of the lid.
I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color.

To make the top, align the three pieces of 2 x 12. Fit them as tightly together as you can. Bore four pocket-screw holes through the bottom faces of the top pieces, then spread glue on each adjoining edge. With the pieces clamped together so that the ends are flush, fasten with 2½-inch pocket screws. Glue will squeeze out of the joint. Wait a few minutes for the glue to get rubbery, then shave it off with a sharp chisel. Keep the top flat as it dries—I like to clamp cauls across both ends to add stability. Cauls are 2 x 4s or other pieces of stout wood turned on their edges.
This was not actually a tutorial post to the woodworking plan ideas but the aim of the post was to give some easy and free woodworking ideas to the readers. If you have some time to entertain yourself and also willing to add some new stuff to your furniture you can take any idea from the list and start working on it. Be sure to see both post tutorial and video tutorials of the plan you have selected, it will make you understand everything nicely.
We tested this out on an old bathroom vanity - as we are over-capitalized on our home and just can't afford a full bathroom remodel. I lightly sanded the vanity, applied 4 coats of stain (allowing them to dry at least 24 hours between coats)with a foam brush, and switched out the vanity hardware. BEAUTIFUL! Our vanity looks brand new and very contemporary! This is a huge upgrade from that 90's "golden oak" color that is everywhere in our house.
This part is optional, but I like the little detail it adds.  I used a table saw to cut a line down the trimmed down 2×6.  I cut it about 1″ from the bottom.  I adjusted my table saw blade about 1/4″ high and ran it through, then adjusted slightly and ran it through again so that the groove was cut about 2 blade widths thick (slightly under 1/4″).  You could do this with a router instead if you wanted.
​Every project needs some tools and material to build on. The tools and material you will need in this plan include Miter saw, jigsaw, measuring tape screws and screwdriver etc. We will suggest you take high-quality material for the plan. Read the source tutorial and watch the video tutorial below for more details. Follow all the steps properly to make a nice and strong Rustic cooler. The tutorial explains the procedure for building this awesome gift. Make sure to use the only high-quality material for any woodworking project.
If you need more inspiration for your next woodworking project, check out Ted's Woodworking Plans package. It has a massive collection of 16,000 projects with breathtaking step-by-step instructions, blueprints, photos and videos. We definitely got a lot of joy from creating some beautiful projects over the years and we hope you'll feel the same way.
A track saw will allow you to make many cuts that would otherwise require a table saw, and is hard to beat if you need to cut up whole sheets of plywood. But for the price of a track saw, you can buy a table saw, and table saws are so much more versatile and convenient. So if you are just starting out, don't let anybody tell you that you don't need a table saw if you have a track saw. Save the track saw purchase for later.
I love this barnwood reclaimed table-your husband did a beautiful job! We have a coffee table and two end tables (hand-me-downs) that remind me a little of this table. They each have metal legs that have criss-cross metal bars that make shelves below, and are great for holding baskets. The tops of each were pretty rough when we inherited the tables, and lately I’ve been thinking about either sanding and then white-washing the wood, and now after seeing your pictures I’m thinking more about just sanding the tops and see how they look and maybe finishing them like you did your table!? (I think I like your idea better! How many coats of Varathane did you folks use?) Thank you so much for sharing!
This wooden sofa side table can also be made in different sizes and shapes as you can find on the internet. Some of the items you will need for this project are wooden pieces, cutter, screws, etc. We have included a video tutorial here that illustrates the process of building a wooden sofa side table. This is not the exact one that you see in the image above, but it can be modified to build any shape or design you want. The video tutorial also has English subtitles to make it easy for anyone to understand and follow the steps.
Copyright 2018, Sarah Pawlak. Feel free to share what you see here but please only share one image with a link back to my page. It is not permissible to copy anything else on my site without first getting written permission from me. All printables are for personal use only. Sponsored posts always include my own thoughts and are never written by the sponsors. Affiliate links may be used at times. Pinning is always appreciated!! Thank you!
I can't really make good recommendations as to what specific brands of tools are better than others. Most of my tools were opportunistic purchases, with relatively little regard to specific brands. More often than not, it's price and a quick inspection to gauge the solidity of the tool that are the determining factors. My tools are usually not among the best that can be had, but good enough.
You can also make wonderful variety of wooden boxes easily at home. It is actually very stress-free and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and stimulating work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these wooden boxes by joining equal size wooden pieces of square shapes. You can also do easily.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
We were so pleased that we bought a quart size to use on the kitchen cabinets. This is the ONLY stain that you can buy which will give you that lovely espresso color. I've tried an "espresso" liquid stain and a "java" liquid stain. I have no idea why they don't work but there is something magic about this gel stain that makes a difference. ... full review

The table top was then sealed with multiple coats of Varathane for protection.   We chose not to add a stain to the top because its natural coloring is gorgeous already.  There are shades of browns and grays in the wood along with saw marks from the original milling, knots, and grooves that you would come to expect from a reclaimed barn wood table.
You guys did a great job – and I love that it was a family project! Your boys will probably remember that for the rest of their lives and enjoy sitting at the table because of it! I’ve been trying to convince my husband that I need to make us a nice table for our new house but he’s being stubborn… I’m going to show him your pictures so he can see how awesome it would be! Great job on your blog! I have one too where I talk about all my projects! 🙂
As Chief Creative Officer and Founding Partner at Brit + Co, Anjelika Temple brings her voracious consumption of all things creative and colorful to DIY projects, geeky gadgetry finds and more. When she's not DIY-ing her heart out, you'll find her throwing dinner parties with friends or adventuring with her husband David, their daughter Anokhi, and their silly dog Turkey.
Have you ever tried the projects that are unique and have some more modern looks? If you haven’t, I will show you some of the new and modern looking ideas which would surely admire you. Try these at your home and add the rare and unique items in your decoration. Here I am sharing 23 wood items with you and I hope you would enjoy the list. So, these modern look projects would give you a good start of making the modern woodworking items. Have a look at these woodworking ideas to get the amazing ideas.
If you are looking to make a large table for dining or celebrating ceremonies with many guests, the J-pedestal dining table can be a great choice. The design was inspired by a Pottery Barn. This gorgeous table adds class to your space which your guests will also praise. Though the materials can be purchased at affordable prices (costing around $125), you need to have good carpentry skills to make it and also the process is time-consuming. Southern Yellow Pine is recommended to use for the top because not only it is inexpensive but also it is strong and durable.
After cutting the rabbet joints, we walk you through the glue-up and assembly of the box. This critical stage in the process involves applying glue to the box parts and using clamps to hold the parts together while the glue dries. The assembly and glue-up tips that we detail in this episode -- and our companion article -- can apply to the assembly of any woodworking project.
Hardwood boards and softwoods may look similar in shape and dimension, but they are sold using completely different measuring systems. Softwoods are typically sold in standard lumber dimensions (such as a 2x4), whereas hardwoods are most often sold by the board foot. Calculating board feet helps you guarantee that you're getting your money's worth on every piece of hardwood you purchase.
The article explains step by step process for making this awesome piece of wooden art. It is actually very easy to make one.This tutorial shows the making of wooden box with one of the easiest ways. However, it is a bit difficult to make them, but not so much.I make this wooden box at home easily. You can also make it by using basic tools like wood cutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps.

Nightstand table plans have everything you need to create a bedside table to keep every needy thing at reach at night time. This Nigh Stand plan is quite different in design from the most of the other plans. This stand has not only the three regular drawers but also having a hidden drawer that uses a secret locking mechanism to keep contents securely.
Douglas fir from home improvement centers will almost always warp when you try to make a flat top. It is never dried to the same extent as hardwood and ships out for the purpose of being used as framing lumber, not furniture lumber. That said, you can do it, but buy it and let it sit in your garage for a few months or longer to let it further dry and acclimate to your environment. Even better if you plane it down after that waiting period, then allowing it to acclimate for another week or so to make it works out all of its twists prior to being turned into a top. Do you have any hardwood dealers in your area? Try visiting one and make an investment in your table...buy some good maple (soft maple is worlds harder than new douglas fir - you don't need hard maple, ie:or sugar/rock maple).
Two children who visit me several times each summer are very fond of trains, both riding on them and playing with them, so I came up with this design. It is not meant to be an authentic model in any way. It is just for the children to play with. The engine and cars feature dovetail joinery details. When someone mentions the words “dovetail joint,” my mind automatically conjures up boxes. A dovetail jig is one of the best ways to make dovetail joint boxes, but a dovetail jig can actually be used to join any two pieces of material together at right angles. This may well be on a box, but it could also be a drawer or, as in this case, parts for a toy train.
Have you ever heard about a chess which is made of wood? If not, then I am presenting a chess which is the most beneficial and attractive one. I am sharing its picture with you and you can make this chess very easily. The most amazing thing is that you can present it as a gift to other fellows. They would surely admire your gift. I am sharing some pictures of this chess; just have a look at these pictures. I am sure you would like these pictures.

The first – and some say the most important choice in designing a dining table is size.  Since our tables are made-to-order we can offer a farmhouse table in any size, shape, style or color.  Do you need a 12 foot table, 72″ round pedestal table, a narrow 32″ wide trestle table, a 36″ high counter height table?  Large, long, narrow, small, square, round, oval tables.  All no problem.  We can make any of these and more.   Farmhouse tables are available as either new wood tables or old reclaimed wood.    


In episode 10 of our series, Getting Started in Woodworking, we complete our first season with a demonstration on how to apply an oil-and-wax wood finish. This finishing recipe is extremely simple and very effective. It will work for about 95 percent of the projects most woodworkers build; the only exceptions are surfaces that need to take a lot of abuse, such as a dining table tabletop.
There are also project books that provide fun new ideas to play with on the scrollsaw, and the fun is made even better when you’re being productive by making gifts at the same time. If you’re a carver, there are many project ideas available to you, as well. There are also Christmas projects for the woodturner. One popular idea is to make ornaments for your tree—or someone else’s. There are several books that will provide help specifically for making ornaments. You’ll find that woodturning allows an opportunity for endless creativity! You can find a variety of kits available, and then you can use whatever material you prefer to turn and then shape and finish any ornament you can imagine!
If you are searching a very stylish gift for your friends who are females, then your search ends here, as I am sharing a leaf shape jewelry box that is the most stylish one. I am sure your friends would love to have it. They can keep their jewelry in this box. You would not need any other box for keeping your essential items. If you would give it as a gift, your friends would surely love to have it. I am sharing some of the pictures of this jewelry box, just have a look at these pictures.
×