Hi Nancy! I only looked specifically for rectangular tables – sorry!! I do know the blog Little Red Brick House made a round farmhouse table but I couldn’t find instructions for it. Maybe reach out to her and she could give you more details? Here’s the link to her post: http://littleredbrickhouse.com/industrial-farmhouse-dining-room-makeover-one-room-challenge-reveal/ Thanks for stopping by! 

You have no money, so you have dull IKEA knives in your kitchen right now that you don't even realize are dull, but you're going to learn that dull knives and tools can be more dangerous than sharp ones. You start changing your form to try to make them work better, when they really just need sharpening. Sign up for that sharpening class you're thinking of taking, stop being afraid to take tools apart to sharpen them thinking you won't be able to put them back together (especially the Lie Nielsen ones, but maybe just don't start with those), and do it. Learning how to properly remove rust and sharpen tools will be one of the skills you'll be most thankful for as time goes on, and it will also enable you to buy some inexpensive used tools at garage sales and make them sing. Speaking of sharpening...
Not at all! I meant to put the total cost in the post, so thank you for reminding me! The wood totaled around $50 for the table and $34 for both benches. We spent another $25 or so on screws and miscellaneous tools, so for about $110, I’d say that’s not too bad!! It took my husband and I a couple hours to build the table, another couple hours to build the benches, and about 2 days to sand, distress, stain, and seal everything.
While metal machinists’ straightedges are ideal for setting up woodworking machinery, their high-tolerance accuracy and weight are overkill for most woodworking tasks. For centuries, shop-made wooden straightedges handled many layout and testing chores, and the tools are still useful today. Wooden straightedges are lightweight, simple to make in any size and can be easily trued with common workshop tools. While straightedges that resemble the machinists’ versions – essentially a skinny rectangle with parallel edges – are useful, these tend to go out of square quickly as the seasons change. However, by understanding a bit about the way wood works, you can make a wooden straightedge that is both accurate and durable.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
This table is designed to be gorgeous. The table might look challenging to build, but if you follow the plan, it is very easy. If you check Step 1, you will find that cutting the joints can be done quickly and a 4 x 4 X-leg can be built with lap joint. This provides stability and durability. Moreover, the herringbone top makes the table even more beautiful.
Block planes range in quality and price from hardware-store versions that cost around $35 to high-end brass planes that cost as much as $250. While the higher-priced models are likely to perform better out of the box and include higher-quality machining and parts, low-cost block planes can perform well if tuned up properly using the techniques detailed in this episode.
This rustic farmhouse table comes with an extension leaf making it extremely functional. When required, you can extend the two end pieces to add extension leaves for additional space on the table and when not in use, simply slide it in. It will cost you around $230-$300 based on the materials which you already have. Though it requires some carpentry skills to get the job done, you can also do it with attention to the detailed instructions provided if you are new to woodworking.
We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.
Per usual, I used pocket screws to fasten the table top together after applying glue to the edges.  Pic 3 shows the underside of the table.  A straight edge clamp and a circular saw were used to trim the ends of the top.  The blue masking tape helps limit splintering from the saw.  To see if the table was square, I compared the diagonal measurements across the table top.  Diagonal measurements on a square or rectangle should be equal if the piece is square on all corners.  It's not very critical on a rustic, distressed table since the table's charm comes from it's imperfections.
If you are looking for a simple design for making your farmhouse table where you can have additional space to make more people sit, this plan could be ideal for you. The benches give you this option to allow a few more people to squeeze in. This table fits excellently in your contemporary space. This plan can be executed by any beginner, and you are also provided with square sized table and benches.
Choose a light-colored wood with interesting grain for the ball. It should be one solid piece, 2 1⁄2- to 3-in. square. I like to make more than one ornament at a time, so I use a rough blank about 8-in. long in order to make two balls. Make the cap and icicle from a contrasting dark wood that takes fine details. I like to use rosewood or ebony. You’ll need a piece that’s 1-in. square and 8-in. long.
From my point of view, I think this is really a different project because normally you will find only one wooden item like a chair, or a table, but in this project, you will find two wooden items. The combination of table and chair is really beneficial for me. I wanted to try something different project from my daily routine life and here in this image, you will find the full-size image of this project so you came to know that I am successful in making chair plus table project.
Per usual, I used pocket screws to fasten the table top together after applying glue to the edges.  Pic 3 shows the underside of the table.  A straight edge clamp and a circular saw were used to trim the ends of the top.  The blue masking tape helps limit splintering from the saw.  To see if the table was square, I compared the diagonal measurements across the table top.  Diagonal measurements on a square or rectangle should be equal if the piece is square on all corners.  It's not very critical on a rustic, distressed table since the table's charm comes from it's imperfections.

Super Chunky X Table Plans and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Ridgid MegaMax, Diablo blades, Bosch drill bits and Makita … [Read more...]


With a little woodworking knowledge and use of some basic items, you can build a wonderful tissue box holder of your own. You can easily build them in bulk and then sell at good rates. Although easy, a wooden tissue box is an equally important and useful item for households. You can also make wonderful variety of wooden boxes easily at home. It is actually very easy and interesting to make. These wooden items give a classy look to your interior furnishing. This is the easiest way to spice up your tables with beautiful wooden tissue boxes. By doing this you can give style to your table settings.
You can create a simple and affordable eye catching frame for your artwork out of a great old wooden ladder. Simply turning the ladder on its side will allow you to display quite a lot of art in a row for so little money. This simple home decor craft project is an affordable way to introduce color, the vintage look, and even some architectural interest without costing a fortune.
10. Drip cyanoacrylate (CA) glue into the ball while holding the cap in place.This will firmly anchor the ball to the cap. To attach the hanging wire (see Sources, below), place a drop of glue on top of the hole and push in the wire. Apply glue to the icicle’s tenon and place it in the bottom hole. Slow setting CA glue works best for oily exotic woods such as rosewood and ebony.

You pass Jeff Miller's shop window every day on your walk to the Metra train. You look at the website with the class listing every day. I know money is tight right now, that you're making about $34,000/year before taxes, that graduate school costs half of that, and that you need to cover all of your living expenses. But that table making class will be worth it, and will introduce you to endless happy hours of woodworking and some of the most talented and generous people you'll ever meet. You don't have any credit card debt, but having a few hundred dollars of it won't kill you. Trust me: in 2010 I don't remember what it cost, only that I made that beautiful cherry Shaker-style end table and learned enough to make more furniture afterward; that I was hooked; and that having things to do by hand after being in an office job all day will save your soul. Trust me. For all the books, videos, websites and other resources online, you'll make the biggest leaps and bounds in woodworking when you take a class with a true expert with decades of experience who can observe and help you correct and hone YOUR mistakes and form.
My table saw cannot cut a leg this thick without making 2 passes so I tapered them on my bandsaw.  The bandsaw leaves a rougher finish and that looked even better on this rustic table.  I made a quick and dirty jig to cut the legs which you can see in pic 3.  The jig has a runner which slides in the miter track of the bandsaw table.  Two hold downs were sufficient to secure the leg to the jig.  I anchored an L-shaped block & a long block for positioning the leg on the jig.  Once you've cut away 2 sides, the long block is no longer accurate and it becomes necessary to line up your mark on the bottom of the leg with the edge of the jig before clamping.   

There is no cost to use the database. Registering is not required. You should be able to browse the database and click through the links. Having said that, considering the fact there are so many browsers out there being used, this site's software might not allow some visitors to browse, it all depends on the Internet traffic, and your browser's compatibility.
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!

If you are looking for a simple design for making your farmhouse table where you can have additional space to make more people sit, this plan could be ideal for you. The benches give you this option to allow a few more people to squeeze in. This table fits excellently in your contemporary space. This plan can be executed by any beginner, and you are also provided with square sized table and benches.
Cordless tools are very handy, and I love my cordless drills. However, if you are just dabbling with getting into woodworking, and you may only use your tools every six months, you may find the litium batteries dying prematurely. Litium batteries slowly self-discharge, and once fully discharged, they are permanently damaged. So if, for example, you use a cordless drill until the battery is low, put it away without recharging, and try to charge it again months later, you may find the battery no longer able to take a charge.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.

Fancy miter gauges sure look nice, with all the coloured bits of anodized aluminium and brass knobs. But are those really something you need? Do you really think that an Incra brand miter gauge made out of bent sheet metal is more trustworthy than the more solid cast aluminium one that came with your saw? Sorry, but those are some of my pet peeves. Build yourself a good table saw sled instead, and you won't need to second guess it. If you cut a lot of 45-degree miters, make another sled with a 45 degree angle.
Whether your work area is a dedicated shop or a temporary cleared space in the basement or garage safety has to be the number one concern. A clean shop is a safe shop, spend a few minutes at the end of the day picking up and sweeping the floor. This not only cleans your surroundings, it also clears your mind, the solution to that problem you had earlier may suddenly appear. 

8. Size a tenon on the cap piece to fit the ball’s hole. Undercut its shoulders, too. The cap piece, as shown here, is glued into a shallow hole turned into the face of a waste block. Shape the cap, then part it off the waste block. To clean up the tip, reverse the cap and push the tenon into a new hole in the waste block. Finish the cap on the lathe, then remove it and drill a small, shallow hole for the hanging wire.

Build your own furniture, a dream of many but a reality for few. In this video I show you how I make farm tables. This is one made for a customer for a new house. It's 10 feet long and made from red oak, sawn from a dead standing tree. The base is made from spruce and yellow pine. It is constructed with mortise and tenon joints, using a hollow chisel mortiser and a tenon jig I made for the table saw.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
If you are searching a very stylish gift for your friends who are females, then your search ends here, as I am sharing a leaf shape jewelry box that is the most stylish one. I am sure your friends would love to have it. They can keep their jewelry in this box. You would not need any other box for keeping your essential items. If you would give it as a gift, your friends would surely love to have it. I am sharing some of the pictures of this jewelry box, just have a look at these pictures.
Disclaimer: Almost any DIY project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Rogue Engineer has made every effort to be complete and accurate in the instructions provided on this website. Rogue Engineer will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer's operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!
Great story and not at all boring. I found a belt sander can be used cross grain to flatten things out. A straight edge and pencil to mark high spots, and more sanding - keep the sander moving always and repeat as necessary. It is possible to get things amazingly flat this way. I'll do that and follow up with a light dusting of blue chalk line chalk in an old sock to highlight the scratches. Progressively smaller grits and sanding with the grain and chalk in between. When no more scratches show with the blue chalk it should be getting pretty smooth. In automotive work this would be called a "dry guide coat". Same idea, similar (but different) product.
Lumber and supplies are moved in and out of the shop through the front overhead door. To the left of the door are the lumber and plywood storage racks. Across from the lumber rack and to the right of the overhead door is the radial arm saw, miter saw and mortise utilizing a single fence system for all operations. Below and above these are cabinets and storage for misc. power hand tools. Next to the radial arm saw and in the corner is the floor drill press with accessory storage next to it for all drilling operations.  Across from the radial arm saw is a separate workstation set up with a small portable table saw and router set-up with storage underneath for routers, bits and accessories.

You can also make wonderful variety of wooden boxes easily at home. It is actually very stress-free and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and stimulating work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws and plates. You can easily make these wooden boxes by joining equal size wooden pieces of square shapes. You can also do easily.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!

If you like a large octagon table instead of a simple round table, you can consider this free DIY plan from Ana White. This table features truss supports and pedestal base which makes it extremely durable and stable. The look might unnerve you because of the angle cuts, but you can easily get this task accomplished with the right tools. The entire list of the tools and materials required are provided. Also, the instructions are very easy to follow with illustrations included. The table has the capacity for seating six people, and it can be manufactured with a budget of around $110.
No doubt many of us would love to have a huge, 2000 square foot building devoted to woodcraft, on a wooded acreage somewhere. But there is a reality that goes with a hobby shared by numerous ordinary people: very few really have the means to set up such palatial workshops. We have our lives to lead, and engaging in such a venture is out of the reach for most, myself included. This article is dedicated to workshops for "the rest of us."
Because these legs were salvaged they had old screw holes in them which were filled prior to painting.  In retrospect, it probably would have looked cool to just leave them.  I lightly sanded the legs with 100 & 150 grit sandpaper which smoothed them without removing all the saw marks.  One coat of chalk paint and 2 coats of clear Briwax was used to finish the legs.  Briwax yellows the finish a bit which aged the paint nicely.  Between coats of Briwax I sanded through the paint on some of the edges with 100 grit paper to show wear.  
In regards to flattening the top, another technique would be take a pencil (soft lead) and lightly draw some big lazy squiggles across the top - enough so that there is a line every few inches. Then, use either a jointer plane or a belt sander to flatten the top until the squiggles are gone. The lines give you a reference to what is high and what is low - and when you are finished in a particular area. With the jointer plane, you want to stroke at about 45 degrees to the grain of the wood, and with a belt sander, you want to keep the sander flat on it's platen (don't let it tilt and dig in) and use wide, arcing, sideways sweeps with very light pressure - again at about 45 degrees to the grain of the wood - never let the sander start or stop when in contact with the surface. In both cases, finish with light sanding with either a belt sander, linear sander, or by hand, stroking in the direction of the grain. Palm sanders can leave swirls. 

You pass Jeff Miller's shop window every day on your walk to the Metra train. You look at the website with the class listing every day. I know money is tight right now, that you're making about $34,000/year before taxes, that graduate school costs half of that, and that you need to cover all of your living expenses. But that table making class will be worth it, and will introduce you to endless happy hours of woodworking and some of the most talented and generous people you'll ever meet. You don't have any credit card debt, but having a few hundred dollars of it won't kill you. Trust me: in 2010 I don't remember what it cost, only that I made that beautiful cherry Shaker-style end table and learned enough to make more furniture afterward; that I was hooked; and that having things to do by hand after being in an office job all day will save your soul. Trust me. For all the books, videos, websites and other resources online, you'll make the biggest leaps and bounds in woodworking when you take a class with a true expert with decades of experience who can observe and help you correct and hone YOUR mistakes and form.
If you are a starter, this is another design you can consider to build. The step by step instructions provided by Boxy Colonial are easy to follow, and the list of materials and tools are also provided. This farmhouse table can be used for any purpose like reading or writing, playing cards, eating, or any other activities where you need a table. Six people can easily sit at the table together.
The most useful stationary tools are a drill press and a table saw. For the longest time, I only had a cheap old contractor saw, and only a very small drill press, but I made do with those. The difference between a good drill press and a cheap drill press is much smaller than the difference between a cheap drill press and no drill press, so don't wait until you can afford the perfect one.
Getting started in woodworking can seem like a daunting task. From specialty woodworking tools to identifying and understanding the different types of wood, there is so much to know that even the old-timers are still developing. But learning and experimenting are what woodworking is all about. Get started on the right foot with some essential basics about safety, tools, lumber, and traditional layout and measuring techniques.

The cost of being disorganized is time. It takes me ten times as long to work on a project when I am scouring the room looking for a drill bit, the right screws, or trying to remember where I last used one of my 10 tape measures. Workshop organization is an ongoing project. As you acquire more tools, you have to rearrange your shop to work in storage for those new items. So mobile and modular storage, wherever possible will save you time down the road. Here are some amazing Workshop Organization Ideas that I hope will inspire you!
×